MX-FXO-MIB Table View

A table of line statuses updated by the line fault detection mechanism.

fxoIfLineStatusEntry row .1.3.6.1.4.1.4935.15.45.1.10.15.5

A row in the fxoIfLineStatusTable table.
A table of line statuses updated by the line fault detection mechanism.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
fxoLineStatus Line status as reported by the line fault detection mechanism. The line fault detection can be enabled by using the fxoLineFaultDetectionEnable object. The unit does not automatically detect when a previo…	Enumeration Enumerated Values: 0 unknown 1 connected 2 disconnected	.1.3.6.1.4.1.4935.15.45.1.10.15.5.5

This table holds the answering delay configuration. Each row in this table
configures the answering delay of a line.

fxoIfAnsweringDelayEntry row .1.3.6.1.4.1.4935.15.45.1.15.5

A row in the fxoIfAnsweringDelayTable table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
fxoPreAnswerDelay The waiting period before answering an incoming SCN call. If this delay expires before the caller ID signal is decoded, the call will proceed without caller ID information. If a minimal wai…	Unsigned32r/w Constraints: range: 0-30000	.1.3.6.1.4.1.4935.15.45.1.15.5.5
fxoAnswerOnCallerIdDetectionEnable Enables answering on caller ID detection. When enabled, an incoming SCN call is answered on the first occurrence of either a) the reception of the caller ID signal. b) the expiration of the delay …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4935.15.45.1.15.5.10
fxoWaitForCalleeToAnswerEnable When the line is set up for automatic call (see the telephonyAttributesAutomaticCallEnable variable), enabling this variable makes the FXO wait until the called party answers the phone before it picks up the PSTN line. …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4935.15.45.1.15.5.60

Table that contains the type of analog lines used.

fxoIfAnalogLineTypeEntry row .1.3.6.1.4.1.4935.15.45.1.25.5

A row in the fxoIfAnalogLineTypeTable table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
fxoIfAnalogLineType Analog line type based on the analog signaling method used. This method defines the way on-hook and off-hook conditions are detected in a voice network. loopStart : A way of signaling that seizes a line b…	Enumerationr/w Enumerated Values: 0 loopStart 1 groundStart	.1.3.6.1.4.1.4935.15.45.1.25.5.5

Table that defines how each line behaves when an incoming call is not allowed.

fxoIfIncomingCallNotAllowedBehaviorEntry row .1.3.6.1.4.1.4935.15.45.1.50.5

A row in the fxoIfIncomingCallNotAllowedBehaviorTable table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
fxoIfIncomingCallNotAllowedBehavior Under certain circumstances (locked port, call direction set to 'IP to SCN only', etc...), incoming calls from the SCN are not allowed. When that is the case, the FXO line behaves in one of the manners below. …	Enumerationr/w Enumerated Values: 0 doNotAnswer 1 playCongestionTone	.1.3.6.1.4.1.4935.15.45.1.50.5.5