Standard view Table view

MRV-PRIV-TRAPS-MIB

        Supports information about device identifiaction.
Source file
MRV-PRIV-TRAPS-MIB
Last revised
Identity
nbPrivTraps
Base OID
1.3.6.1.4.1.629.1.50.21
Imported Objects
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC DisplayString TEXTUAL-CONVENTION
Net-SNMP examples using the mrv MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MRV-PRIV-TRAPS-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MRV-PRIV-TRAPS-MIB::nbPrivTraps'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MRV-PRIV-TRAPS-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MRV-PRIV-TRAPS-MIB::nbPrivTraps'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (30)
nbase
.1.3.6.1.4.1.629
nbSwitchG1
.1.3.6.1.4.1.629.1
nbSwitchG1Il
.1.3.6.1.4.1.629.1.50
nbPrivTraps
.1.3.6.1.4.1.629.1.50.21
mrvPrivateTrapsConformance
.1.3.6.1.4.1.629.1.50.21.100
mrvPrivateTrapsMIBCompliances
.1.3.6.1.4.1.629.1.50.21.100.1
mrvPrivateTrapsMIBGroups
.1.3.6.1.4.1.629.1.50.21.100.2
mrvPrivateTraps
.1.3.6.1.4.1.629.1.50.21.3
mrvTrapParameters
.1.3.6.1.4.1.629.1.50.21.3.1
mrvDevPSIndex
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.629.1.50.21.3.1.10
mrvDevFANIndex
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.629.1.50.21.3.1.11
mrvEthOamMdLevel
NbEthOamMDLevel
 .1.3.6.1.4.1.629.1.50.21.3.1.12
mrvEthOamMaIndex
Unsigned32
 .1.3.6.1.4.1.629.1.50.21.3.1.13
mrvEthOamMepIdentifier
NbEthOamMepId
 .1.3.6.1.4.1.629.1.50.21.3.1.14
mrvEthOamTrapCcmHighestPrDefect
NbEthOamCcmHighestDefectPri
 .1.3.6.1.4.1.629.1.50.21.3.1.15
mrvDevLosGrActivePortNumber r/w
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.629.1.50.21.3.1.16
mrvDevLosGrPrimaryPort r/w
Integer32
 .1.3.6.1.4.1.629.1.50.21.3.1.17
mrvDevLosGrSecondaryPort
Integer32
 .1.3.6.1.4.1.629.1.50.21.3.1.18
mrvDevLosGrActionCause
Enumeration
 .1.3.6.1.4.1.629.1.50.21.3.1.19
mrvElementID
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.629.1.50.21.3.1.2
mrvPortLinSlavePorts r/w
OctetString
 .1.3.6.1.4.1.629.1.50.21.3.1.20
mrvPortLinActionCause
Enumeration
 .1.3.6.1.4.1.629.1.50.21.3.1.21
mrvPortIndex
Integer32
 .1.3.6.1.4.1.629.1.50.21.3.1.5
mrvEventDescription
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.629.1.50.21.3.1.7
mrvEventClass
TCEventClass
 .1.3.6.1.4.1.629.1.50.21.3.1.8
mrvEventLevel
TCEventLevel
 .1.3.6.1.4.1.629.1.50.21.3.1.9
mrvPrivateGenTraps
.1.3.6.1.4.1.629.1.50.21.3.6
mrvPrivateGenTrapPrefix
.1.3.6.1.4.1.629.1.50.21.3.6.0
mrvPrivateSpecTraps
.1.3.6.1.4.1.629.1.50.21.3.7
mrvPrivateSpecTrapPrefix
.1.3.6.1.4.1.629.1.50.21.3.7.0
Dependencies (3) 3 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. SNMPv2-TCrfc
  4. MRV-PRIV-TRAPS-MIBmrvselected
Type Definitions (5)
NbEthOamCcmHighestDefectPri
Enumeration
none(0)
defRDICCM(1)
defMACstatus(2)
defRemoteCCM(3)
defErrorCCM(4)
defXconCCM(5)
NbEthOamMDLevel
Integer32 range: 0..7
NbEthOamMepId
Unsigned32 range: 1..4095
TCEventClass
Enumeration
serviceAffecting(1)
nonServiceAffecting(2)
TCEventLevel
Enumeration
critical(1)
major(2)
minor(3)
info(4)
clear(5)
Conformance Groups (2)
mrvPrivateTrapsMandatoryGroup
mrvPortIndex mrvEventDescription mrvEventClass mrvEventLevel mrvElementID mrvDevPSIndex mrvDevFANIndex mrvEthOamMdLevel mrvEthOamMaIndex mrvEthOamMepIdentifier mrvEthOamTrapCcmHighestPrDefect mrvDevLosGrActivePortNumber mrvDevLosGrPrimaryPort mrvDevLosGrSecondaryPort mrvDevLosGrActionCause mrvPortLinSlavePorts mrvPortLinActionCause
.
 .1.3.6.1.4.1.629.1.50.21.100.2.1
mrvPrivateTrapsNotifGrp
mrvColdStart mrvWarmStart mrvPortLinkUp mrvPortLinkDown mrvAuthenticationFailure mrvPowerSupplyUp mrvPowerSupplyDown mrvFANUnitUp mrvFANUnitDown mrvDeviceTemperatureNormal mrvDeviceTemperatureHigh mrvDot1agCfmFault mrvDot1agCfmRecovery mrvPortProtectionBackup mrvPortProtectionPrimary mrvPortReflectionLinkDown mrvPortReflectionLinkUp
The notification which are required to be supported by
implementations of this MIB.
 .1.3.6.1.4.1.629.1.50.21.100.2.2
Compliance Statements (1)

OID .1.3.6.1.4.1.629.1.50.21.100.1.1
The core compliance statement for all the implementations.
Required groups
mandatory mrvPrivateTrapsMandatoryGroup
mandatory mrvPrivateTrapsNotifGrp
Notifications / Traps (17)
NameOIDDescription
mrvColdStart
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass
.1.3.6.1.4.1.629.1.50.21.3.6.0.1
This trap signifies that the SNMP entity, acting
in an agent role, is reinitializing itself and that its
configuration may have been altered.
mrvWarmStart
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass
.1.3.6.1.4.1.629.1.50.21.3.6.0.2
This trap signifies that the SNMP entity, acting
in an agent role, is reinitializing itself such that its
configuration is unaltered.
mrvPortLinkDown
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvPortIndex
.1.3.6.1.4.1.629.1.50.21.3.6.0.3
A mrvPortLinkDown trap signifies that the SNMP entity, acting in
agent role, has detected that the ifOperStatus object for
of its communication links is about to enter the down
from some other state (but not from the notPresent).
This other state is indicated by the included value of ifOperStatus.
mrvPortLinkUp
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvPortIndex
.1.3.6.1.4.1.629.1.50.21.3.6.0.4
A mrvPortLinkUp trap signifies that the SNMP entity, acting in an
role, has detected that the ifOperStatus object for
of its communication links left the down state and
transitioned into some other state (but not into the
notPresent state). This other state is indicated by the
included value of ifOperStatus.
mrvAuthenticationFailure
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass
.1.3.6.1.4.1.629.1.50.21.3.6.0.5
An authenticationFailure trap signifies that the SNMP
entity, acting in an agent role, has received a protocol
message that is not properly authenticated. While all
implementations of the SNMP must be capable of generating
this trap, the snmpEnableAuthenTraps object indicates
whether this trap will be generated.
mrvPowerSupplyUp
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvDevPSIndex
.1.3.6.1.4.1.629.1.50.21.3.7.0.1
The SNMP trap that is generated when
power supply unit changes it's state from notActive to active
mrvPortProtectionPrimary
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvDevLosGrActivePortNumber mrvDevLosGrPrimaryPort mrvDevLosGrSecondaryPort mrvDevLosGrActionCause
.1.3.6.1.4.1.629.1.50.21.3.7.0.10
The SNMP trap that is generated when one of the Ports in the LOS Group
became Active.
For example: port A and port B are the members of the LOS Group while
port A is a primary port and port B is the secondary port.
mrvPortReflectionLinkDown
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvPortIndex mrvPortLinSlavePorts mrvPortLinActionCause
.1.3.6.1.4.1.629.1.50.21.3.7.0.11
The SNMP trap that is generated when Dependent ports
[mrvPortLinSlavePorts] Link State became Down as result of
link reflection only.
It should not be sent, when port became Down by
physical disconnection or CLI command 'port state disable' -
unlike standard LinkDown.
In the case of [mrvPortLinSymmetricStatus]='nonSymmetric'
the Dependent ports are indeed the LIN Slave ports.
But in the case of [mrvPortLinSymmetricStatus]='symmetric'
the Dependent ports list has only one port which can be
Master port or Slave port, because in this case these both
ports are equivalent.
mrvPortReflectionLinkUp
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvPortIndex mrvPortLinSlavePorts mrvPortLinActionCause
.1.3.6.1.4.1.629.1.50.21.3.7.0.12
The SNMP trap that is generated when Dependent ports
[mrvPortLinSlavePorts] Link State became Up.
as result of link reflection only.
It should not be sent, when port became Up by
physical connection or CLI command 'port state enable' -
unlike standard LinkUp.
In the case of [mrvPortLinSymmetricStatus]='nonSymmetric'
the Dependent ports are indeed the LIN Slave ports.
But in the case of [mrvPortLinSymmetricStatus]='symmetric'
the Dependent ports list has only one port which can be
Master port or Slave port, because in this case these both
ports are equivalent.
mrvPowerSupplyDown
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvDevPSIndex
.1.3.6.1.4.1.629.1.50.21.3.7.0.2
The SNMP trap that is generated when
power supply unit changes it's state from active to notActive
mrvFANUnitUp
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvDevFANIndex
.1.3.6.1.4.1.629.1.50.21.3.7.0.3
The SNMP trap that is generated when
FAN unit changes it's state from notActive to active
mrvFANUnitDown
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvDevFANIndex
.1.3.6.1.4.1.629.1.50.21.3.7.0.4
The SNMP trap that is generated when
FAN unit changes it's state from active to notActive
mrvDeviceTemperatureNormal
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass
.1.3.6.1.4.1.629.1.50.21.3.7.0.5
The SNMP trap that is generated when
Device Temperature changes it's state from High to Normal
mrvDeviceTemperatureHigh
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass
.1.3.6.1.4.1.629.1.50.21.3.7.0.6
The SNMP trap that is generated when
Device Temperature changes it's state from Normal to High
mrvDot1agCfmFault
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvEthOamMdLevel mrvEthOamMaIndex mrvEthOamMepIdentifier mrvEthOamTrapCcmHighestPrDefect
.1.3.6.1.4.1.629.1.50.21.3.7.0.7
A MEP has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault
mrvDot1agCfmRecovery
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvEthOamMdLevel mrvEthOamMaIndex mrvEthOamMepIdentifier mrvEthOamTrapCcmHighestPrDefect
.1.3.6.1.4.1.629.1.50.21.3.7.0.8
A MEP has a persistent defect condition. A notification
(recovery alarm) is sent to the management entity with the OID
of the MEP that has detected the recovery after a fault.
mrvPortProtectionBackup
mrvElementID mrvEventDescription mrvEventLevel mrvEventClass mrvDevLosGrActivePortNumber mrvDevLosGrPrimaryPort mrvDevLosGrSecondaryPort mrvDevLosGrActionCause
.1.3.6.1.4.1.629.1.50.21.3.7.0.9
The SNMP trap that is generated when one of the Ports in the LOS Group
became Active.
For example: port A and port B are the members of the LOS Group while
port A is a primary port and port B is the secondary port.