MPLS-LPS-MIB
This MIB module supports the configuration and management of
MPLS-TP linear protection domains.
Copyright (c) 2017 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
- Source file
MPLS-LPS-MIB- Last revised
- Identity
mplsLpsMIB- Base OID
1.3.6.1.2.1.10.166.22
Imported Objects
| DIFFSERV-MIB | IndexIntegerNextFree |
| MPLS-OAM-ID-STD-MIB | mplsOamIdMegIndex mplsOamIdMeIndex mplsOamIdMeMpIndex |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-LPS-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-LPS-MIB::mplsLpsMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LPS-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LPS-MIB::mplsLpsMIB'
Objects (51)
Showing 51 of 51 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.10.166.22 |
||
.1.3.6.1.2.1.10.166.22.0 |
||
.1.3.6.1.2.1.10.166.22.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.166.22.1.1 |
|
.1.3.6.1.2.1.10.166.22.1.2 |
||
.1.3.6.1.2.1.10.166.22.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.166.22.1.2.1.1 |
|
|
decisecondsUnsigned32
|
.1.3.6.1.2.1.10.166.22.1.2.1.10 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.10.166.22.1.2.1.11 |
|
|
microsecondsUnsigned32
|
.1.3.6.1.2.1.10.166.22.1.2.1.12 |
|
.1.3.6.1.2.1.10.166.22.1.2.1.13 |
||
.1.3.6.1.2.1.10.166.22.1.2.1.14 |
||
.1.3.6.1.2.1.10.166.22.1.2.1.15 |
||
.1.3.6.1.2.1.10.166.22.1.2.1.16 |
||
|
OctetString
|
.1.3.6.1.2.1.10.166.22.1.2.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.22.1.2.1.3 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.22.1.2.1.4 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.22.1.2.1.5 |
|
|
Unsigned32
|
.1.3.6.1.2.1.10.166.22.1.2.1.6 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.10.166.22.1.2.1.7 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.10.166.22.1.2.1.8 |
|
|
minutesUnsigned32
|
.1.3.6.1.2.1.10.166.22.1.2.1.9 |
|
.1.3.6.1.2.1.10.166.22.1.3 |
||
.1.3.6.1.2.1.10.166.22.1.3.1 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.1 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.10 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.11 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.2 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.3 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.4 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.5 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.6 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.7 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.8 |
||
.1.3.6.1.2.1.10.166.22.1.3.1.9 |
||
.1.3.6.1.2.1.10.166.22.1.4 |
||
.1.3.6.1.2.1.10.166.22.1.4.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.166.22.1.4.1.1 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.22.1.4.1.2 |
|
.1.3.6.1.2.1.10.166.22.1.5 |
||
.1.3.6.1.2.1.10.166.22.1.5.1 |
||
|
Bits
|
.1.3.6.1.2.1.10.166.22.1.5.1.1 |
|
.1.3.6.1.2.1.10.166.22.1.5.1.2 |
||
.1.3.6.1.2.1.10.166.22.1.5.1.3 |
||
.1.3.6.1.2.1.10.166.22.1.5.1.4 |
||
.1.3.6.1.2.1.10.166.22.1.5.1.5 |
||
|
secondsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.10.166.22.1.5.1.6 |
|
|
Bits
|
.1.3.6.1.2.1.10.166.22.1.6 |
|
.1.3.6.1.2.1.10.166.22.2 |
||
.1.3.6.1.2.1.10.166.22.2.1 |
||
.1.3.6.1.2.1.10.166.22.2.2 |
Dependencies (13) 7 direct · 6 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- DIFFSERV-DSCP-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- INTEGRATED-SERVICES-MIBrfc
- DIFFSERV-MIBrfc
- MPLS-TC-STD-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- MPLS-OAM-ID-STD-MIBrfc
- MPLS-LPS-MIBrfcselected
Type Definitions (4)
| Enumeration |
noCmd(1)clear(2)lockoutOfProtection(3)forcedSwitch(4)manualSwitchToWork(5)manualSwitchToProtect(6)exercise(7)freeze(8)clearfreeze(9) |
|
| OctetString |
range: 2 |
|
| Enumeration |
noRequest(0)doNotRevert(1)reverseRequest(2)exercise(3)waitToRestore(4)manualSwitch(5)signalDegrade(7)signalFail(10)forcedSwitch(12)lockoutOfProtection(14) |
|
| Enumeration |
normal(1)unavLOlocal(2)unavSFPlocal(3)unavSDPlocal(4)unavLOremote(5)unavSFPremote(6)unavSDPremote(7)protfailSFWlocal(8)protfailSDWlocal(9)protfailSFWremote(10)protfailSDWremote(11)switadmFSlocal(12)switadmMSWlocal(13)switadmMSPlocal(14)switadmFSremote(15)switadmMSWremote(16)switadmMSPremote(17)wtr(18)dnr(19)exerLocal(20)exerRemote(21) |
Conformance Groups (4)
Compliance Statements (2)
OID
.1.3.6.1.2.1.10.166.22.2.1.1Compliance statement for agents that provide full support for
the MPLS-LPS-MIB module. Such devices can provide linear
protection and also be configured using this MIB module.
the MPLS-LPS-MIB module. Such devices can provide linear
protection and also be configured using this MIB module.
Required groups
| mandatory | mplsLpsScalarGroup | |
| mandatory | mplsLpsTableGroup | |
| mandatory | mplsLpsMeTableGroup | |
| optional | mplsLpsNotificationGroup |
This group is only mandatory for those implementations that can efficiently implement the notifications contained in this group. |
OID
.1.3.6.1.2.1.10.166.22.2.1.2Compliance statement for agents that only provide
read-only support for the MPLS-LPS-MIB module.
read-only support for the MPLS-LPS-MIB module.
Required groups
| mandatory | mplsLpsScalarGroup | |
| mandatory | mplsLpsTableGroup | |
| mandatory | mplsLpsMeTableGroup | |
| optional | mplsLpsNotificationGroup |
This group is only mandatory for those implementations that can efficiently implement the notifications contained in this group. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mplsLpsConfigMode | readonly | Write access is not required. | |
| mplsLpsConfigProtectionType | readonly | Write access is not required. | |
| mplsLpsConfigRevertive | readonly | Write access is not required. | |
| mplsLpsConfigSdThreshold | readonly | Write access is not required. | |
| mplsLpsConfigSdBadSeconds | readonly | Write access is not required. | |
| mplsLpsConfigSdGoodSeconds | readonly | Write access is not required. | |
| mplsLpsConfigWaitToRestore | readonly | Write access is not required. | |
| mplsLpsConfigContinualTxInterval | readonly | Write access is not required. | |
| mplsLpsConfigRapidTxInterval | readonly | Write access is not required. | |
| mplsLpsConfigCommand | readonly | Write access is not required. | |
| mplsLpsConfigRowStatus | readonly |
active(1)
|
Write access is not required. |
| mplsLpsConfigStorageType | readonly | Write access is not required. | |
| mplsLpsMeConfigDomain | readonly | Write access is not required. | |
| mplsLpsMeConfigPath | readonly | Write access is not required. |
Notifications / Traps (7)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.2.1.10.166.22.0.1 |
An mplsLpsEventSwitchover notification is sent when the
value of an instance of mplsLpsMeStatusSwitchovers increments. |
|
.1.3.6.1.2.1.10.166.22.0.2 |
An mplsLpsEventRevertiveMismatch notification is sent when
the value of mplsLpsStatusRevertiveMismatch changes. |
|
.1.3.6.1.2.1.10.166.22.0.3 |
An mplsLpsEventProtecTypeMismatch notification is sent
when the value of mplsLpsStatusProtecTypeMismatch changes. |
|
.1.3.6.1.2.1.10.166.22.0.4 |
An mplsLpsEventCapabilitiesMismatch notification is sent
when the value of mplsLpsStatusCapabilitiesMismatch changes. |
|
.1.3.6.1.2.1.10.166.22.0.5 |
An mplsLpsEventPathConfigMismatch notification is sent
when the value of mplsLpsStatusPathConfigMismatch changes. |
|
.1.3.6.1.2.1.10.166.22.0.6 |
An mplsLpsEventFopNoResponse notification is sent when the
value of mplsLpsStatusFopNoResponses increments. |
|
.1.3.6.1.2.1.10.166.22.0.7 |
An mplsLpsEventFopTimeout notification is sent when the
value of mplsLpsStatusFopTimeouts increments. |