MPLS-FTN-STD-MIB Table View

This table contains the currently defined FTN entries.
This table allows FEC to NHLFE mappings to be
specified.  Each entry in this table defines a rule to
be applied to incoming packets (on interfaces that the
FTN entry is activated on using mplsFTNMapTable) and an
action to be taken on matching packets
(mplsFTNActionPointer).
          
This table supports 6-tuple matching rules based on one
or more of source address range, destination address
range, source port range, destination port range, IPv4
          
Protocol field or IPv6 next-header field and the
DiffServ Code Point (DSCP) to be specified.
          
The action pointer points either to instance of
mplsXCEntry in MPLS-LSR-STD-MIB when the NHLFE is a non-
TE LSP, or to an instance of mplsTunnelEntry in the
MPLS-TE-STD-MIB when the NHLFE is an originating TE
tunnel.

mplsFTNEntry row .1.3.6.1.2.1.10.166.8.1.3.1

Each entry represents one FTN entry which defines a
rule to compare incoming packets with and an action to
be taken on matching packets.

Indexes

mplsFTNIndex

Column	Syntax	OID
mplsFTNIndex This is the unique index for a conceptual row in mplsFTNTable. To create a new conceptual row in mplsFTNTable a Network Management Application SHOULD retrieve the current value of mplsFTNIndexNext to dete…	MplsFTNEntryIndex Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.10.166.8.1.3.1.1
mplsFTNRowStatus Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.8.1.3.1.2
mplsFTNDescr The description of this FTN entry. Since the index for this table has no particular significance or meaning, this object should contain some meaningful text that an operator could use to further distinguish entries in t…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.8.1.3.1.3
mplsFTNMask This bit map indicates which of the fields described next, namely source address range, destination address range, source port range, destination port range, IPv4 Protocol field or IPv6 next-header field and Differentia…	Bitsr/w Enumerated Values: 0 sourceAddr 1 destAddr 2 sourcePort 3 destPort 4 protocol 5 dscp	.1.3.6.1.2.1.10.166.8.1.3.1.4
mplsFTNAddrType This object determines the type of address contained in the source and destination address objects (mplsFTNSourceAddrMin, mplsFTNSourceAddrMax, mplsFTNDestAddrMin and mplsFTNDestAddrMax) of a conceptual row. …	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.166.8.1.3.1.5
mplsFTNSourceAddrMin The lower end of the source address range. The type of this object is determined by the corresponding mplsFTNAddrType object.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.8.1.3.1.6
mplsFTNSourceAddrMax The upper end of the source address range. The type of this object is determined by the corresponding mplsFTNAddrType object.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.8.1.3.1.7
mplsFTNDestAddrMin The lower end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.8.1.3.1.8
mplsFTNDestAddrMax The higher end of the destination address range. The type of this object is determined by the corresponding mplsFTNAddrType object.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.8.1.3.1.9
mplsFTNSourcePortMin The lower end of the source port range.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.10.166.8.1.3.1.10
mplsFTNSourcePortMax The higher end of the source port range	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.10.166.8.1.3.1.11
mplsFTNDestPortMin The lower end of the destination port range.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.10.166.8.1.3.1.12
mplsFTNDestPortMax The higher end of the destination port range.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.2.1.10.166.8.1.3.1.13
mplsFTNProtocol The IP protocol to match against the IPv4 protocol number or IPv6 Next-Header number in the packet. A value of 255 means match all. Note that the protocol number of 255 is reserved by IANA, and Next-Header number of 0 …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.2.1.10.166.8.1.3.1.14
mplsFTNDscp The contents of the DSCP field.	DIFFSERV-DSCP-TCDscpr/w Type Constraints: range: 0..63	.1.3.6.1.2.1.10.166.8.1.3.1.15
mplsFTNActionType The type of action to be taken on packets matching this FTN entry.	Enumerationr/w Enumerated Values: 1 redirectLsp 2 redirectTunnel	.1.3.6.1.2.1.10.166.8.1.3.1.16
mplsFTNActionPointer If mplsFTNActionType is redirectLsp(1), then this object MUST contain zeroDotZero or point to a instance of mplsXCEntry indicating the LSP to redirect matching packets to. If mplsFTNActionType is redirect…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.8.1.3.1.17
mplsFTNStorageType The storage type for this FTN entry. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.8.1.3.1.18

This table contains objects which provide the
capability to apply or map FTN rules as defined by
entries in mplsFTNTable to specific interfaces in the
system.  FTN rules are compared with incoming packets
in the order in which they are applied on an interface.
          
The indexing structure of mplsFTNMapTable is as
follows.
          
- mplsFTNMapIndex indicates the interface to which the
  rule is being applied.  A value of 0 represents the
  application of the rule to all interfaces.
          
- mplsFTNMapPrevIndex specifies the rule on the
  interface prior to the one being applied.  A value of
  0 specifies that the rule is being inserted at the
  head of the list of rules currently applied to the
  interface.
          
- mplsFTNMapCurrIndex is the index in mplsFTNTable
  corresponding to the rule being applied.
          
This indexing structure makes the entries in the table
behave like items in a linked-list.  The object
mplsFTNMapPrevIndex in each conceptual row is a pointer
to the previous entry that is applied to a particular
interface.  This allows a new entry to be 'inserted' at
an arbitrary position in a list of entries currently
applied to an interface.  This object is self-
adjusting, i.e., its value is automatically adjusted by
the agent, if necessary, after an insertion or deletion
operation.
          
Using this linked-list structure, one can retrieve FTN
entries in the order of application on a per-interface
basis as follows:
          
- To determine the first FTN entry on an interface
  with index ifIndex perform a GETNEXT retrieval
  operation on mplsFTNMapRowStatus.ifIndex.0.0; the
  returned object, if one exists, is (say)
  mplsFTNMapRowStatus.ifIndex.0.n (mplsFTNMapRowStatus
  is the first accessible columnar object in the
  conceptual row). Then the index of the first FTN
  entry applied on this interface is n.
          
- To determine the FTN entry applied to an interface
  after the one indexed by n perform a GETNEXT
  retrieval operation on
  mplsFTNMapRowStatus.ifIndex.n.0.  If such an entry
  exists the returned object would be of the form
  mplsFTNMapRowStatus.ifIndex.n.m.  Then the index of
  the next FTN entry applied on this interface is m.
          
- If the FTN entry indexed by n is the last entry
  applied to the interface with index ifIndex then the
  object returned would either be:
          
  1.mplsFTNMapRowStatus.ifIndexNext.0.k, where
    ifIndexNext is the index of the next interface in
          
    ifTable to which an FTN entry has been applied, in
    which case k is the index of the first FTN entry
    applied to the interface with index ifIndexNext;
          
  or:
          
  2.mplsFTNMapStorageType.firstIfIndex.0.p, if there
    are no more entries in mplsFTNMapTable, where
    firstIfIndex is the first entry in ifTable to
    which an FTN entry has been mapped.
          
Use the above steps to retrieve all the applied FTN
entries on a per-interface basis in application order.
Note that the number of retrieval operations is the
same as the number of applied FTN entries (i.e., the
minimum number of GETNEXT operations needed using any
indexing scheme).
          
Agents MUST NOT allow the same FTN entry as specified
by mplsFTNMapCurrIndex to be applied multiple times to
the same interface.
          
Agents MUST NOT allow the creation of rows in this
table until the corresponding rows are created in the
mplsFTNTable.
          
If a row in mplsFTNTable is destroyed, the agent MUST
destroy the corresponding entries (i.e., ones with a
matching value of mplsFTNCurrIndex) in this table as
well.

mplsFTNMapEntry row .1.3.6.1.2.1.10.166.8.1.5.1

Each conceptual row represents the application of an
FTN rule at a specific position in the list of FTN
rules applied on an interface.

Indexes

mplsFTNMapIndex mplsFTNMapPrevIndex mplsFTNMapCurrIndex

Column	Syntax	OID
mplsFTNMapIndex The interface index that this FTN entry is being applied to. A value of zero indicates an entry that is applied all interfaces. Entries mapped to an interface by specifying its (non- zero) interface index…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.166.8.1.5.1.1
mplsFTNMapPrevIndex The index of the previous FTN entry that was applied to this interface. The special value zero indicates that this should be the first FTN entry in the list.	MplsFTNEntryIndexOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.8.1.5.1.2
mplsFTNMapCurrIndex Index of the current FTN entry that is being applied to this interface.	MplsFTNEntryIndex Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.10.166.8.1.5.1.3
mplsFTNMapRowStatus Used for controlling the creation and deletion of this row. All writable objects in this row may be modified at any time. If a conceptual row in mplsFTNMapTable points to a conceptual row i…	Enumerationr/w Enumerated Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.2.1.10.166.8.1.5.1.4
mplsFTNMapStorageType The storage type for this entry. Conceptual rows having the value 'permanent' need not allow write- access to any columnar objects in this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.8.1.5.1.5

This table contains performance statistics on FTN
entries on a per-interface basis.

mplsFTNPerfEntry row .1.3.6.1.2.1.10.166.8.1.6.1

Each entry contains performance information for the
specified interface and an FTN entry mapped to this
interface.

Indexes

mplsFTNPerfIndex mplsFTNPerfCurrIndex

Column	Syntax	OID
mplsFTNPerfIndex The interface index of an interface that an FTN entry has been applied/mapped to. Each instance of this object corresponds to an instance of mplsFTNMapIndex.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.166.8.1.6.1.1
mplsFTNPerfCurrIndex Index of an FTN entry that has been applied/mapped to the specified interface. Each instance of this object corresponds to an instance of mplsFTNMapCurrIndex.	MplsFTNEntryIndex Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.10.166.8.1.6.1.2
mplsFTNPerfMatchedPackets Number of packets that matched the specified FTN entry if it is applied/mapped to the specified interface. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at oth…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.166.8.1.6.1.3
mplsFTNPerfMatchedOctets Number of octets that matched the specified FTN entry if it is applied/mapped to the specified interface. Discontinuities in the value of this counter can occur at re-initialization of the management syst…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.166.8.1.6.1.4
mplsFTNPerfDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local mana…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.166.8.1.6.1.5