Standard view Table view

MPLS-FTN-STD-MIB

        Copyright (C) The Internet Society (2004). The
initial version of this MIB module was published
in RFC 3814. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html
        
This MIB module contains managed object definitions for
specifying FEC to NHLFE (FTN) mappings and corresponding
performance for MPLS.
Source file
MPLS-FTN-STD-MIB
Last revised
Identity
mplsFTNStdMIB
Base OID
1.3.6.1.2.1.10.166.8
Imported Objects
DIFFSERV-DSCP-TC Dscp
IF-MIB ifCounterDiscontinuityGroup ifGeneralInformationGroup InterfaceIndexOrZero
INET-ADDRESS-MIB InetAddress InetAddressType InetPortNumber
MPLS-TC-STD-MIB mplsStdMIB
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC RowPointer RowStatus StorageType TEXTUAL-CONVENTION TimeStamp
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-FTN-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-FTN-STD-MIB::mplsFTNStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-FTN-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-FTN-STD-MIB::mplsFTNStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (43)
mplsFTNStdMIB
.1.3.6.1.2.1.10.166.8
mplsFTNNotifications
.1.3.6.1.2.1.10.166.8.0
mplsFTNObjects
.1.3.6.1.2.1.10.166.8.1
mplsFTNIndexNext
MplsFTNEntryIndexOrZero
 .1.3.6.1.2.1.10.166.8.1.1
mplsFTNTableLastChanged
SNMPv2-TCTimeStamp
 .1.3.6.1.2.1.10.166.8.1.2
mplsFTNTable
.1.3.6.1.2.1.10.166.8.1.3
mplsFTNEntry
mplsFTNIndex
 .1.3.6.1.2.1.10.166.8.1.3.1
mplsFTNIndex
MplsFTNEntryIndex
 .1.3.6.1.2.1.10.166.8.1.3.1.1
mplsFTNSourcePortMin r/w
INET-ADDRESS-MIBInetPortNumber
 .1.3.6.1.2.1.10.166.8.1.3.1.10
mplsFTNSourcePortMax r/w
INET-ADDRESS-MIBInetPortNumber
 .1.3.6.1.2.1.10.166.8.1.3.1.11
mplsFTNDestPortMin r/w
INET-ADDRESS-MIBInetPortNumber
 .1.3.6.1.2.1.10.166.8.1.3.1.12
mplsFTNDestPortMax r/w
INET-ADDRESS-MIBInetPortNumber
 .1.3.6.1.2.1.10.166.8.1.3.1.13
mplsFTNProtocol r/w
Integer32
 .1.3.6.1.2.1.10.166.8.1.3.1.14
mplsFTNDscp r/w
DIFFSERV-DSCP-TCDscp
 .1.3.6.1.2.1.10.166.8.1.3.1.15
mplsFTNActionType r/w
Enumeration
 .1.3.6.1.2.1.10.166.8.1.3.1.16
mplsFTNActionPointer r/w
SNMPv2-TCRowPointer
 .1.3.6.1.2.1.10.166.8.1.3.1.17
mplsFTNStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.2.1.10.166.8.1.3.1.18
mplsFTNRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.10.166.8.1.3.1.2
mplsFTNDescr r/w
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.2.1.10.166.8.1.3.1.3
mplsFTNMask r/w
Bits
 .1.3.6.1.2.1.10.166.8.1.3.1.4
mplsFTNAddrType r/w
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.2.1.10.166.8.1.3.1.5
mplsFTNSourceAddrMin r/w
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.2.1.10.166.8.1.3.1.6
mplsFTNSourceAddrMax r/w
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.2.1.10.166.8.1.3.1.7
mplsFTNDestAddrMin r/w
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.2.1.10.166.8.1.3.1.8
mplsFTNDestAddrMax r/w
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.2.1.10.166.8.1.3.1.9
mplsFTNMapTableLastChanged
SNMPv2-TCTimeStamp
 .1.3.6.1.2.1.10.166.8.1.4
mplsFTNMapTable
.1.3.6.1.2.1.10.166.8.1.5
mplsFTNMapEntry
mplsFTNMapIndexmplsFTNMapPrevIndexmplsFTNMapCurrIndex
 .1.3.6.1.2.1.10.166.8.1.5.1
mplsFTNMapIndex
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.2.1.10.166.8.1.5.1.1
mplsFTNMapPrevIndex
MplsFTNEntryIndexOrZero
 .1.3.6.1.2.1.10.166.8.1.5.1.2
mplsFTNMapCurrIndex
MplsFTNEntryIndex
 .1.3.6.1.2.1.10.166.8.1.5.1.3
mplsFTNMapRowStatus r/w
Enumeration
 .1.3.6.1.2.1.10.166.8.1.5.1.4
mplsFTNMapStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.2.1.10.166.8.1.5.1.5
mplsFTNPerfTable
.1.3.6.1.2.1.10.166.8.1.6
mplsFTNPerfEntry
mplsFTNPerfIndexmplsFTNPerfCurrIndex
 .1.3.6.1.2.1.10.166.8.1.6.1
mplsFTNPerfIndex
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.2.1.10.166.8.1.6.1.1
mplsFTNPerfCurrIndex
MplsFTNEntryIndex
 .1.3.6.1.2.1.10.166.8.1.6.1.2
mplsFTNPerfMatchedPackets
SNMPv2-SMICounter64
 .1.3.6.1.2.1.10.166.8.1.6.1.3
mplsFTNPerfMatchedOctets
SNMPv2-SMICounter64
 .1.3.6.1.2.1.10.166.8.1.6.1.4
mplsFTNPerfDiscontinuityTime
SNMPv2-TCTimeStamp
 .1.3.6.1.2.1.10.166.8.1.6.1.5
mplsFTNConformance
.1.3.6.1.2.1.10.166.8.2
mplsFTNGroups
.1.3.6.1.2.1.10.166.8.2.1
mplsFTNCompliances
.1.3.6.1.2.1.10.166.8.2.2
Dependencies (10) 8 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. DIFFSERV-DSCP-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. INET-ADDRESS-MIBrfc
  9. MPLS-TC-STD-MIBrfc
  10. SNMP-FRAMEWORK-MIBrfc
  11. MPLS-FTN-STD-MIBrfcselected
Type Definitions (2)
MplsFTNEntryIndex
Unsigned32 range: 1..4294967295
MplsFTNEntryIndexOrZero
Unsigned32 range: 0..4294967295
Conformance Groups (3)
mplsFTNRuleGroup
mplsFTNIndexNext mplsFTNTableLastChanged mplsFTNRowStatus mplsFTNDescr mplsFTNMask mplsFTNAddrType mplsFTNSourceAddrMin mplsFTNSourceAddrMax mplsFTNDestAddrMin mplsFTNDestAddrMax mplsFTNSourcePortMin mplsFTNSourcePortMax mplsFTNDestPortMin mplsFTNDestPortMax mplsFTNProtocol mplsFTNActionType mplsFTNActionPointer mplsFTNDscp mplsFTNStorageType
Collection of objects that implement MPLS FTN rules.
 .1.3.6.1.2.1.10.166.8.2.1.1
mplsFTNMapGroup
mplsFTNMapTableLastChanged mplsFTNMapRowStatus mplsFTNMapStorageType
Collection of objects that implement activation of MPLS
FTN entries on interfaces.
 .1.3.6.1.2.1.10.166.8.2.1.2
mplsFTNPerfGroup
mplsFTNPerfMatchedPackets mplsFTNPerfMatchedOctets mplsFTNPerfDiscontinuityTime
Collection of objects providing MPLS FTN performance
information.
 .1.3.6.1.2.1.10.166.8.2.1.3
Compliance Statements (2)

OID .1.3.6.1.2.1.10.166.8.2.2.1
Compliance statement for agents that provide full
support for MPLS-FTN-STD-MIB.
Required groups
mandatory IF-MIB::ifGeneralInformationGroup
mandatory IF-MIB::ifCounterDiscontinuityGroup
mandatory mplsFTNRuleGroup
mandatory mplsFTNMapGroup
mandatory mplsFTNPerfGroup
Object refinements
ObjectAccessSyntaxDescription
mplsFTNAddrType
INET-ADDRESS-MIBInetAddressType
ipv4(1), ipv6(2)
An implementation is only required to support IPv4
and/or IPv6 addresses. An implementation is only
required to support the address types that are actually
supported on the LSR.
mplsFTNSourceAddrMin
INET-ADDRESS-MIBInetAddress
 An implementation is only required to support IPv4
and/or IPv6 addresses. An implementation is only
required to support the address types that are actually
supported on the LSR.
mplsFTNSourceAddrMax
INET-ADDRESS-MIBInetAddress
 An implementation is only required to support IPv4
and/or IPv6 addresses. An implementation is only
required to support the address types that are actually
supported on the LSR.
mplsFTNDestAddrMin
INET-ADDRESS-MIBInetAddress
 An implementation is only required to support IPv4
and/or IPv6 addresses. An implementation is only
required to support the address types that are actually
supported on the LSR.
mplsFTNDestAddrMax
INET-ADDRESS-MIBInetAddress
 An implementation is only required to support IPv4
and/or IPv6 addresses. An implementation is only
required to support the address types that are actually
supported on the LSR.

OID .1.3.6.1.2.1.10.166.8.2.2.2
Compliance requirement for implementations that only

provide read-only support for MPLS-FTN-STD-MIB. Such
devices can then be monitored but cannot be configured
using this MIB module.
Required groups
mandatory IF-MIB::ifGeneralInformationGroup
mandatory IF-MIB::ifCounterDiscontinuityGroup
mandatory mplsFTNRuleGroup
mandatory mplsFTNMapGroup
mandatory mplsFTNPerfGroup
Object refinements
ObjectAccessSyntaxDescription
mplsFTNIndexNext noaccess
This object is not needed when mplsFTNTable is
implemented as read-only.
mplsFTNRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active is the only
status that needs to be supported.
mplsFTNDescr readonly
Write access is not required.
mplsFTNMask readonly
Write access is not required.
mplsFTNAddrType readonly
INET-ADDRESS-MIBInetAddressType
ipv4(1), ipv6(2)
Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses.
mplsFTNSourceAddrMin readonly
INET-ADDRESS-MIBInetAddress
 Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses.
mplsFTNSourceAddrMax readonly
INET-ADDRESS-MIBInetAddress
 Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses.
mplsFTNDestAddrMin readonly
INET-ADDRESS-MIBInetAddress
 Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses.
mplsFTNDestAddrMax readonly
INET-ADDRESS-MIBInetAddress
 Write access is not required. An implementation is only
required to support IPv4 and IPv6 addresses.
mplsFTNSourcePortMin readonly
Write access is not required.
mplsFTNSourcePortMax readonly
Write access is not required.
mplsFTNDestPortMin readonly
Write access is not required.
mplsFTNDestPortMax readonly
Write access is not required.
mplsFTNProtocol readonly
Write access is not required.
mplsFTNActionType readonly
Write access is not required.
mplsFTNActionPointer readonly
Write access is not required.
mplsFTNDscp readonly
Write access is not required.
mplsFTNStorageType readonly
Write access is not required.
mplsFTNMapRowStatus readonly
Enumeration
active(1)
Write access is not required, and active(1) is the only
status that needs to be supported.
mplsFTNMapStorageType readonly
Write access is not required.