MPLS-FRR-ONE2ONE-STD-MIB

        Copyright (c) 2011 IETF Trust and the persons
identified as authors of the code.  All rights
reserved.
        
Redistribution and use in source and binary forms,
with or without modification, is permitted pursuant
to, and subject to the license terms contained in,
the Simplified BSD License set forth in Section 4.c
of the IETF Trust's Legal Provisions Relating to
IETF Documents
(http://trustee.ietf.org/license-info).
        
This MIB module contains object definitions for the
MPLS Traffic Engineering one-to-one backup method for
Fast Reroute as defined in RFC 4090.
    
Source file
MPLS-FRR-ONE2ONE-STD-MIB
Last revised
Identity
mplsFrrOne2OneMIB
Base OID
1.3.6.1.2.1.203
Imported Objects
INET-ADDRESS-MIB InetAddress InetAddressType
MPLS-FRR-GENERAL-STD-MIB mplsFrrGeneralConstraintsGroup (no object page) mplsFrrGeneralScalarGroup (no object page) mplsFrrGeneralTunnelARHopGroup (no object page)
MPLS-TC-STD-MIB MplsLsrIdentifier MplsTunnelIndex MplsTunnelInstanceIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Gauge32 Integer32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-FRR-ONE2ONE-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-FRR-ONE2ONE-STD-MIB::mplsFrrOne2OneMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-FRR-ONE2ONE-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-FRR-ONE2ONE-STD-MIB::mplsFrrOne2OneMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (25)
.1.3.6.1.2.1.203
.1.3.6.1.2.1.203.1
Integer32
.1.3.6.1.2.1.203.1.1
Integer32
.1.3.6.1.2.1.203.1.2
Integer32
.1.3.6.1.2.1.203.1.3
.1.3.6.1.2.1.203.1.4
.1.3.6.1.2.1.203.1.5
.1.3.6.1.2.1.203.1.5.1
.1.3.6.1.2.1.203.1.5.1.1
.1.3.6.1.2.1.203.1.5.1.2
.1.3.6.1.2.1.203.1.5.1.3
.1.3.6.1.2.1.203.1.5.1.4
.1.3.6.1.2.1.203.1.5.1.5
.1.3.6.1.2.1.203.1.5.1.6
.1.3.6.1.2.1.203.1.5.1.7
.1.3.6.1.2.1.203.1.5.1.8
.1.3.6.1.2.1.203.1.5.1.9
.1.3.6.1.2.1.203.1.6
.1.3.6.1.2.1.203.1.6.1
.1.3.6.1.2.1.203.1.6.1.1
Enumeration
.1.3.6.1.2.1.203.1.6.1.2
.1.3.6.1.2.1.203.1.6.1.3
.1.3.6.1.2.1.203.2
.1.3.6.1.2.1.203.2.1
.1.3.6.1.2.1.203.2.2
Dependencies (14) 6 direct · 8 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (3)
Objects that are required for general One-to-One PLR
information.
.1.3.6.1.2.1.203.2.2.1
Objects that are required to present the detour LSP
information at the detour ingress, transit, and egress
LSRs.
.1.3.6.1.2.1.203.2.2.2
Objects that are required to represent the FRR
One-to-One PLR information.
.1.3.6.1.2.1.203.2.2.3
Compliance Statements (2)

OID .1.3.6.1.2.1.203.2.1.1
Compliance statements for SNMP engines that support the
MPLS-FRR-ONE2ONE-STD-MIB module.
Required groups

OID .1.3.6.1.2.1.203.2.1.2
Compliance statements for SNMP engines that support the

MPLS-FRR-ONE2ONE-STD-MIB module.
Required groups
Object refinements
ObjectAccessSyntaxDescription
mplsFrrOne2OnePlrSenderAddrType readonly
Write access is not required.
mplsFrrOne2OnePlrSenderAddr readonly
Write access is not required.