MOXA-IAW5x50A_IO-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
28
Rows
28
Columns
155

infraGeneralSettingTable

table
.1.3.6.1.4.1.8691.2.21.1.3.4.3.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk infraGeneralSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::infraGeneralSettingTable' 
WLAN profile general setting table.
infraGeneralSettingEntry row .1.3.6.1.4.1.8691.2.21.1.3.4.3.1.1.1
WLAN profile general setting entry.
Indexes
Column Syntax OID
profileIndex
The profile index
Enumeration
Enumerated Values:
1profile1
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.1.1.1.1
profileName
Assign profile name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.1.1.1.2
profileRFType
Select WLAN network type.
Enumerationr/w
Enumerated Values:
0auto
1w802_11a
2w802_11b_g
3w802_11a_n
4w802_11b_g_n
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.1.1.1.3
profileWlanSSID
Set WLAN SSID
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.1.1.1.4

securitySettingTable

table
.1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk securitySettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::securitySettingTable' 
WLAN profile security setting table.
securitySettingEntry row .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1
WLAN profile security setting entry.
Indexes
Column Syntax OID
authentication
Wireless LAN autentication type.
Enumerationr/w
Enumerated Values:
0open-system
1shared-key
2wpa
3wpa-psk
4wpa2
5wpa2-psk
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.1
encryption
Set encryption type. Selection rule is as following.
authentication selectable encryption
============== =====================
open-system(0) disable(0), wep(1)
shared-key(1) wep(1)
wpa(…
Enumerationr/w
Enumerated Values:
0disable
1wep
2tkip
3aes-ccmp
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.2
wepKeyLength
WEP key length.
Enumerationr/w
Enumerated Values:
0key-64-bits
1key-128-bits
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.3
wepKeyIndex
WEP key index 1~4.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.4
wepKeyPassphrase
WEP key passphrase.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.5
wepKeyFormat
WEP key format.
Enumerationr/w
Enumerated Values:
0ascii
1hex
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.6
eapMethod
EAP method for WPA and WPA2 authentication.
Enumerationr/w
Enumerated Values:
0tls
1peap
2ttls
3leap
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.12
tunneledAuth
Set tunneled authentication protocol when PEAP/TTLS is selected as EAP method.
EAP method selectable tunneled authentication
========== ==================================
peap(1) gtc(0), md5(1), mschapv2(5) …
Enumerationr/w
Enumerated Values:
0gtc
1md5
2pap
3chap
4mschap
5mschapv2
6tls
7eap-tls
8eap-mschapv2
9eap-gtc
10eap-md5
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.13
wpaUsername
WPA username for WPA and WPA2 authentication.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.14
wpaAnonymousUsername
Anonymous username needed when TTLS is selected as EAP method.
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.16
verifyServerCert
The setting of verify server certificate.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.17
trustedServerCert
Display whether or not trusted server certificate is installed.
Enumeration
Enumerated Values:
0not-installed
1installed
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.18
userCert
Display whether or not user certificate is installed.
Enumeration
Enumerated Values:
0not-installed
1installed
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.19
userPrivateKey
Display whether or not user private key is installed.
Enumeration
Enumerated Values:
0not-installed
1installed
 .1.3.6.1.4.1.8691.2.21.1.3.4.3.2.1.1.20

opModePortTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk opModePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::opModePortTable' 
The serial ports' operation mode table.
opModePortEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.1.1.1
The serial port's operation mode entry.
Indexes
Column Syntax OID
portIndex
The serial port index.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.8691.2.21.1.4.1.1.1.1.1
portMode
The operation mode of the serial port. Note that
changing this setting may also change the application.
Enumerationr/w
Enumerated Values:
0pair-connection-slave
1pair-connection-master
2real-Com
7disable
10tcp-Server
12ethernet-modem
13tcp-Client
14udp
20rfc-2217
21reverse-Terminal
 .1.3.6.1.4.1.8691.2.21.1.4.1.1.1.1.2

realCOMTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk realCOMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::realCOMTable' 
The Real COM mode table.
realCOMEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1
The Real COM mode entry.
Indexes
Column Syntax OID
realCOMTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort IAW5x50A_IO series device server
automatically closes the TCP connection if there is
no TCP acti…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.1
realCOMMaxConnection
Max connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the NPort
IAW5x50A_IO seri…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.2
realCOMIgnoreJammedIp
Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been …
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.3
realCOMAllowDriverControl
If Max connection is greater than 1, NPort will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the NPort IAW5…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.4
realCOMConnectionDownRTS
For some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
NPort IAW5x50A_IO series device server. If this setting is
set to 'always low,' RTS will change its state to
…
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.5
realCOMConnectionDownDTR
For some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
NPort IAW5x50A_IO series device server. If this setting is
set to 'always low,' DTR will change its state to
…
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.1.1.1.6

rfc2217Table

table
.1.3.6.1.4.1.8691.2.21.1.4.1.2.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk rfc2217Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::rfc2217Table' 
The RFC2217 mode table.
rfc2217Entry row .1.3.6.1.4.1.8691.2.21.1.4.1.2.2.1.1
The RFC2217 mode entry.
Indexes
Column Syntax OID
rfc2217TcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort IAW5x50A_IO series device server
automatically closes the TCP connection if there is
no TCP acti…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.2.1.1.1
rfc2217TcpPort
TCP server port of RFC2217.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.2.1.1.2

tcpServerTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk tcpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::tcpServerTable' 
The TCP server mode table.
tcpServerEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1
The TCP server mode entry.
Indexes
Column Syntax OID
tcpServerTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort IAW5x50A_IO series device server
automatically closes the TCP connection if there is
no TCP acti…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.1
tcpServerInactivityTime
0 ms: TCP connection is not closed when the
serial line is idle.
1-65535 ms: The NPort IAW5x50A_IO series device server
automatically closes the TCP connection if there is
no serial data activity for the given time. Aft…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.2
tcpServerMaxConnection
Max connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the NPort
IAW5x50A_IO seri…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.3
tcpServerIgnoreJammedIp
Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been …
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.4
tcpServerAllowDriverControl
If Max connection is greater than 1, NPort will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the NPort IAW5…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.5
tcpServerTcpPort
The 'TCP port' is the TCP port that the NPort
IAW5x50A_IO series device server uses to listen to
connections, and that other devices must use to
contact the NPort IAW5x50A_IO series device server.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.6
tcpServerCmdPort
The 'Command port' is a TCP port used to listen for
SSDK commands from the host. In order to
prevent a TCP port conflict with other applications,
the user can set the Command port to another port
if needed.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.7
tcpServerConnectionDownRTS
For some applications, serial devices must obtain
the Ethernet link status from the RTS signal sent by the
NPort IAW5x50A_IO series device server. If this setting is
set to 'goes low,' RTS will change the state to
low i…
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.8
tcpServerConnectionDownDTR
For some applications, serial devices must obtain
the Ethernet link status from the DTR signal sent by the
NPort IAW5x50A_IO series device server. If this setting is
set to 'goes low,' DTR will change the state to
low i…
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.3.1.1.9

tcpClientTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1 · 1 row entry · 16 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk tcpClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::tcpClientTable' 
The TCP client mode table.
tcpClientEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1
The TCP client mode entry.
Indexes
Column Syntax OID
tcpClientTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort IAW5x50A_IO series device client
automatically closes the TCP connection if there is
no TCP acti…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.1
tcpClientInactivityTime
0 ms: TCP connection is not closed when the
serial line is idle.
1-65535 ms: The NPort IAW5x50A_IO series device client
automatically closes the TCP connection if there is
no serial data activity for the given time.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.2
tcpClientIgnoreJammedIp
Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been …
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.3
tcpClientDestinationAddress1
The NPort IAW5x50A_IO series device server can connect
actively to a remote host that has this IP address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.4
tcpClientDestinationPort1
The NPort IAW5x50A_IO series device server can connect
actively to a remote host that has this TCP port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.5
tcpClientDestinationAddress2
The NPort IAW5x50A_IO series device server can
connect actively to a remote host that has this IP
address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.6
tcpClientDestinationPort2
The NPort IAW5x50A_IO series device server can
connect actively to a remote host that
has this TCP port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.7
tcpClientDestinationAddress3
The NPort IAW5x50A_IO series device server can
connect actively to a remote host that
has this IP address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.8
tcpClientDestinationPort3
The NPort IAW5x50A_IO series device server can
connect actively to a remote host that
has this port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.9
tcpClientDestinationAddress4
The NPort IAW5x50A_IO series device server can
connect actively to a remote host that
has this IP address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.10
tcpClientDestinationPort4
The NPort IAW5x50A_IO series device server can
connect actively to a remote host that
has this port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.11
tcpClientDesignatedLocalPort1
The local TCP port used to connect actively to the
remote host.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.12
tcpClientDesignatedLocalPort2
The local TCP port used to connect actively to the
remote host.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.13
tcpClientDesignatedLocalPort3
The local TCP port used to connect actively to the
remote host.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.14
tcpClientDesignatedLocalPort4
The local TCP port used to connect actively to the
remote host.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.15
tcpClientConnectionControl
Events that cause the TCP client to drop the
connection.
Enumerationr/w
Enumerated Values:
257startup-None
258anyCharacter-None
260dsrOn-None
264dcdOn-None
514anyCharacter-InactivityTime
1028dsrOn-DSR-Off
2056dcdOn-DCD-Off
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.4.1.1.16

udpTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1 · 1 row entry · 13 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk udpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::udpTable' 
The UDP mode table.
udpEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1
The UDP mode entry.
Indexes
Column Syntax OID
udpDestinationAddress1Begin
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts whose IP addresses
are in the range between this parameter and
udpDestinationAddress1End.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.1
udpDestinationAddress1End
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts whose IP addresses
are in the range between udpDestinationAddress1Begin
and this parameter.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.2
udpDestinationPort1
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts that have this UDP port
number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.3
udpDestinationAddress2Begin
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts whose IP addresses
are in the range between this parameter and
udpDestinationAddress2End.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.4
udpDestinationAddress2End
The NPort IAW5x50A_IO series device server can actively
send UDP packets to the remote hosts whose IP addresses
are in the range between udpDestinationAddress2Begin
and this parameter.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.5
udpDestinationPort2
The NPort IAW5x50A_IO series device server can actively
send UDP packets to the remote hosts that have this
UDP port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.6
udpDestinationAddress3Begin
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts whose IP addresses
are in the range between this parameter and
udpDestinationAddress3End.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.7
udpDestinationAddress3End
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts whose IP addresses
are in the range between udpDestinationAddress3Begin
and this parameter.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.8
udpDestinationPort3
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts that have this UDP
port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.9
udpDestinationAddress4Begin
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts whose IP addresses
are in the range between this parameter and
udpDestinationAddress4End.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.10
udpDestinationAddress4End
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts whose IP addresses
are in the range between udpDestinationAddress4Begin
and this parameter.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.11
udpDestinationPort4
The NPort IAW5x50A_IO series device server can actively
send UDP packets to remote hosts that have this
UDP port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.12
udpLocalListenPort
The UDP port that the NPort IAW5x50A_IO series device
server listens to and that other devices must use
to contact the NPort IAW5x50A_IO series device server.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.5.1.1.13

pairConnectionMasterTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.2.6.1 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk pairConnectionMasterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::pairConnectionMasterTable' 
The pair connection master mode table.
pairConnectionMasterEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.2.6.1.1
The pair connection master mode entry.
Indexes
Column Syntax OID
pairConnectionMasterTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort IAW5x50A_IO series device server
automatically closes the TCP connection if there is
no TCP acti…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.6.1.1.1
pairConnectionMasterDestnationAddress
IP address of pair connection slave.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.6.1.1.2
pairConnectionMasterDestnationTcpPort
TCP port of pair connection slave.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.6.1.1.3

pairConnectionSlaveTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.2.7.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk pairConnectionSlaveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::pairConnectionSlaveTable' 
The pair connection slave mode table.
pairConnectionSlaveEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.2.7.1.1
The pair connection slave mode entry.
Indexes
Column Syntax OID
pairConnectionSlaveTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort IAW5x50A_IO series device server
automatically closes the TCP connection if there is
no TCP acti…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.7.1.1.1
pairConnectionSlaveLocalTcpPort
TCP server port of pair connection slave.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.7.1.1.2

ethernetModemTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.2.8.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk ethernetModemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::ethernetModemTable' 
The ethernet modem mode table.
ethernetModemEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.2.8.1.1
The ethernet modem mode entry.
Indexes
Column Syntax OID
ethernetModemTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort IAW5x50A_IO series device server
automatically closes the TCP connection if there is
no TCP acti…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.8.1.1.1
ethernetModemLocalTcpPort
TCP server port of ethernet modem.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.8.1.1.2

reverseTerminalTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.2.9.1 · 1 row entry · 5 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk reverseTerminalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::reverseTerminalTable' 
The reverse terminal mode table.
reverseTerminalEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.2.9.1.1
The reverse terminal mode entry.
Indexes
Column Syntax OID
reverseTerminalTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The NPort IAW5x50A_IO series device server
automatically closes the TCP connection if there is
no TCP acti…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.9.1.1.1
reverseTerminalInactivityTime
0 min: TCP connection is not closed when the
serial line is idle.
0-99 min: The NPort IAW5x50A_IO series device server
automatically closes the TCP connection.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.9.1.1.2
reverseTerminalTcpPort
Each of the NPort IAW5x50A_IO series device server's serial
ports are mapped to a TCP port.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.9.1.1.3
reverseTerminalAuthenticationType
The reverse terminal authentication type.
Enumerationr/w
Enumerated Values:
0none
1local
2radius
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.9.1.1.4
reverseTerminalMapKeys
If data received through NPort IAW5x50A_IO series device
server's Ethernet port is sent using the 'enter'
command, the data will be transmitted out through
the serial port with an added
1. 'carriage return + line feed' …
Enumerationr/w
Enumerated Values:
0cr-lf
1cr
2lf
 .1.3.6.1.4.1.8691.2.21.1.4.1.2.9.1.1.5

dataPackingPortTable

table
.1.3.6.1.4.1.8691.2.21.1.4.1.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk dataPackingPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::dataPackingPortTable' 
The Data Packing table.
dataPackingPortEntry row .1.3.6.1.4.1.8691.2.21.1.4.1.3.1.1
The Data Packing entry.
Indexes
Column Syntax OID
portPacketLength
If the value is 0, the Delimiter Process will be
used, regardless of the length of the data
packet. If the data length (in bytes) matches the
configured value, the data will be forced out. The
data length can be configu…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.3.1.1.1
portDelimiter1Enable
Enable the first delimiter character.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.1.3.1.1.2
portDelimiter1
The first delimiter character, in hex decimal.
OctetStringr/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.8691.2.21.1.4.1.3.1.1.3
portDelimiter2Enable
Enable the second delimiter character.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.1.3.1.1.4
portDelimiter2
The second delimiter character, in hex decimal.
OctetStringr/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.8691.2.21.1.4.1.3.1.1.5
portDelimiterProcess
'delimiterAddOne' or 'delimiterAddTwo': The data
will be transmitted when an additional byte (for
'delimiterAddOne'), or an additional 2 bytes (for
'delimiterAddTwo') of data is received after
receiving the Delimiter.
'…
Enumerationr/w
Enumerated Values:
1doNothing
2delimiterAddOne
4delimiterAddTwo
8stripDelimiter
 .1.3.6.1.4.1.8691.2.21.1.4.1.3.1.1.6
portForceTransmit
0: Disable the force transmit timeout.
1 to 65535: Forces the NPort IAW5x50A_IO series device
server's TCP/IP protocol software to try to pack
serial data received during the specified time into
the same data frame.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.4.1.3.1.1.7

comParamPortTable

table
.1.3.6.1.4.1.8691.2.21.1.4.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk comParamPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::comParamPortTable' 
The Communication Parameters table.
comParamPortEntry row .1.3.6.1.4.1.8691.2.21.1.4.2.1.1
The Communication Parameters entry.
Indexes
Column Syntax OID
portAlias
Port alias is included to allow easy identification of
the serial devices that are connected to NPort IAW5x50A_IO
series device server's serial port.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.8691.2.21.1.4.2.1.1.1
portInterface
The serial interface that the port works on.
Enumerationr/w
Enumerated Values:
0rs-232
1rs-422
2rs-485-2wire
3rs-485-4wire
 .1.3.6.1.4.1.8691.2.21.1.4.2.1.1.2
portBaudRate
The port's speed in bits per second. You can choose
a standard baud rate by indexing.
Enumerationr/w
Enumerated Values:
0b50
1b75
2b110
3b134
4b150
5b300
6b600
7b1200
8b1800
9b2400
10b4800
12b9600
13b19200
14b38400
15b57600
16b115200
17b230400
18b460800
19b921600
 .1.3.6.1.4.1.8691.2.21.1.4.2.1.1.3
portDataBits
The number of bits in a character for the port.
Enumerationr/w
Enumerated Values:
0bits-5
1bits-6
2bits-7
3bits-8
 .1.3.6.1.4.1.8691.2.21.1.4.2.1.1.4
portStopBits
The number of stop bits for the port.
Enumerationr/w
Enumerated Values:
0bits-1
1bits-1dot5
2bits-2
 .1.3.6.1.4.1.8691.2.21.1.4.2.1.1.5
portParity
The parity bit for the port.
Enumerationr/w
Enumerated Values:
0none
1odd
3even
5mark
7space
 .1.3.6.1.4.1.8691.2.21.1.4.2.1.1.6
portFlowControl
The flow-control method for the port.
Enumerationr/w
Enumerated Values:
0none
1rts-cts
2xon-xoff
 .1.3.6.1.4.1.8691.2.21.1.4.2.1.1.7
portFIFO
Enable or disable the port's FIFO.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.2.1.1.8

dataBufferingPortTable

table
.1.3.6.1.4.1.8691.2.21.1.4.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk dataBufferingPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::dataBufferingPortTable' 
The Data Buffering table.
dataBufferingPortEntry row .1.3.6.1.4.1.8691.2.21.1.4.3.1.1
The Data Buffering entry.
Indexes
Column Syntax OID
portBufferingEnable
Enable off-line port buffering.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.3.1.1.1
portSerialDataLoggingEnable
Enable or disable serial data logging for the port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.4.3.1.1.2

diTable

table
.1.3.6.1.4.1.8691.2.21.1.6.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk diTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::diTable' 
The DI channel table
diEntry row .1.3.6.1.4.1.8691.2.21.1.6.1.1.1
The DI channel item
Indexes
Column Syntax OID
diIndex
DI - index
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.8691.2.21.1.6.1.1.1.1
diMode
DI - mode (0: DI, 1: Counter mode)
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.8691.2.21.1.6.1.1.1.2
diStatus
DI - DI mode status (0: OFF, 1: ON) or Counter mode value
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8691.2.21.1.6.1.1.1.3
diFilter
DI - filter setting (unit: 12.5 ms)
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8691.2.21.1.6.1.1.1.4
diTrigger
DI - Counter mode - event (0: Rising Edge, 1: Falling Edge, 2: Both)
Enumerationr/w
Enumerated Values:
0loToHigh
1highToLow
2both
 .1.3.6.1.4.1.8691.2.21.1.6.1.1.1.5
diCntStart
DI - Counter mode - status (0: STOP, 1: START)
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.8691.2.21.1.6.1.1.1.6

doTable

table
.1.3.6.1.4.1.8691.2.21.1.6.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk doTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::doTable' 
The DO channel table
doEntry row .1.3.6.1.4.1.8691.2.21.1.6.2.1.1
The DO channel item
Indexes
Column Syntax OID
doIndex
DO - index
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.8691.2.21.1.6.2.1.1.1
doMode
DO - mode (0: DO, 1: Pulse)
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.8691.2.21.1.6.2.1.1.2
doStatus
DO - DO mode status (0: OFF, 1: ON) or Pulse mode count
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8691.2.21.1.6.2.1.1.3
doPulseOnWidth
DO - Pulse mode - ON width (unit: 25 ms)
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8691.2.21.1.6.2.1.1.4
doPulseOffWidth
DO - Pulse mode - OFF width (unit: 25 ms)
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.8691.2.21.1.6.2.1.1.5
doPulseStart
DO - Pulse mode - status (0: STOP, 1: START)
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.8691.2.21.1.6.2.1.1.6

accessibleIpListTable

table
.1.3.6.1.4.1.8691.2.21.1.7.1.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk accessibleIpListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::accessibleIpListTable' 
Accessible IP List table.
accessibleIpListEntry row .1.3.6.1.4.1.8691.2.21.1.7.1.1.2.1
Accessible IP List entry.
Indexes
Column Syntax OID
accessibleIpListIndex
Accessible IP List index.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.8691.2.21.1.7.1.1.2.1.1
activeAccessibleIpList
Enable or disable this accessible IP entry.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.7.1.1.2.1.2
accessibleIpListAddress
Accessible IP address. This value can be the IP address of a
single host if the netmask is set to '255.255.255.255,'
or it can be a network address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.7.1.1.2.1.3
accessibleIpListNetmask
Accessible IP address netmask. The IP address and
netmask are used to specify a group of remote hosts.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.7.1.1.2.1.4

portEventSettingsTable

table
.1.3.6.1.4.1.8691.2.21.1.7.2.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk portEventSettingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::portEventSettingsTable' 
Port Event Settings Table.
portEventSettingsEntry row .1.3.6.1.4.1.8691.2.21.1.7.2.2.1.1
Port Event Settings entry.
Indexes
Column Syntax OID
mailDCDchange
A change in the DCD (Data Carrier Detect) signal
indicates that the modem connection status has
changed. For example, if the DCD signal changes to
low, it indicates that the connection line is down.
When the DCD signal …
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.7.2.2.1.1.1
trapDCDchange
A change in the DCD (Data Carrier Detect) signal
indicates that the modem connection status has
changed. For example, if the DCD signal changes to
low, it indicates that the connection line is down.
When the DCD signal …
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.7.2.2.1.1.2
mailDSRchange
A change in the DSR (Data Set Ready) signal
indicates that the data communication equipment is
powered off. For example, if the DSR signal changes
to low, it indicates that the data communication
equipment is powered do…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.7.2.2.1.1.3
trapDSRchange
A change in the DSR (Data Set Ready) signal
indicates that the data communication equipment is
powered off. For example, if the DSR signal changes
to low, it indicates that the data communication
equipment is powered do…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.7.2.2.1.1.4

diEventSettingsTable

table
.1.3.6.1.4.1.8691.2.21.1.7.2.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk diEventSettingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::diEventSettingsTable' 
DI Event Settings Table.
diEventSettingsEntry row .1.3.6.1.4.1.8691.2.21.1.7.2.3.1.1
DI Event Settings entry.
Indexes
Column Syntax OID
diEventIndex
DI - event index
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.8691.2.21.1.7.2.3.1.1.1
diEventTrap
DI - trap setting
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.7.2.3.1.1.2

doEventSettingsTable

table
.1.3.6.1.4.1.8691.2.21.1.7.2.3.2 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk doEventSettingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::doEventSettingsTable' 
DO Event Settings Table.
doEventSettingsEntry row .1.3.6.1.4.1.8691.2.21.1.7.2.3.2.1
DO Event Settings entry.
Indexes
Column Syntax OID
doEventIndex
DO - event index
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.8691.2.21.1.7.2.3.2.1.1
doEventTrap
DO - trap setting
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.7.2.3.2.1.2

monitorRemoteIpTable

table
.1.3.6.1.4.1.8691.2.21.1.8.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorRemoteIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::monitorRemoteIpTable' 
Serial to Network Connections Remote IP table.
monitorRemoteIpEntry row .1.3.6.1.4.1.8691.2.21.1.8.1.1.1
Serial to Network Connections Remote IP entry.
Indexes
Column Syntax OID
remoteIpIndex
Serial to Network Connections Remote IP index.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.8691.2.21.1.8.1.1.1.1
monitorRemoteIp
The remote IP currently connecting to this port.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.21.1.8.1.1.1.2

monitorSerialPortStatusTable

table
.1.3.6.1.4.1.8691.2.21.1.8.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorSerialPortStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::monitorSerialPortStatusTable' 
Serial Port Status table.
monitorSerialPortStatusEntry row .1.3.6.1.4.1.8691.2.21.1.8.2.1.1
Serial Port Status entry.
Indexes
Column Syntax OID
monitorTxCount
View the number of bytes transmitted from the port
since the last time the port was initialized.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.2.1.1.1
monitorRxCount
View the number of bytes received by the port since
the last time the port was initialized.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.2.1.1.2
monitorTxTotalCount
View the number of bytes transmitted from the port
since the last time the system was initialized.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.2.1.1.3
monitorRxTotalCount
View the number of bytes received by the port since
the last time the system was initialized.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.2.1.1.4
monitorDSR
View the current DSR status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.21.1.8.2.1.1.5
monitorDTR
View the current DTR status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.21.1.8.2.1.1.6
monitorRTS
View the current RTS status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.21.1.8.2.1.1.7
monitorCTS
View the current CTS status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.21.1.8.2.1.1.8
monitorDCD
View the current DCD status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.21.1.8.2.1.1.9

monitorSerialPortErrorCountTable

table
.1.3.6.1.4.1.8691.2.21.1.8.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorSerialPortErrorCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::monitorSerialPortErrorCountTable' 
Serial Port Error Count table.
monitorSerialPortErrorCountEntry row .1.3.6.1.4.1.8691.2.21.1.8.3.1.1
Serial Port Error Count entry.
Indexes
Column Syntax OID
monitorErrorCountFrame
View the number of 'Frame' errors for this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.3.1.1.1
monitorErrorCountParity
View the number of 'Parity' errors for this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.3.1.1.2
monitorErrorCountOverrun
View the number of 'Overrun' errors for this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.3.1.1.3
monitorErrorCountBreak
View the number of 'Break' errors for this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.3.1.1.4

monitorSerialPortSettingsTable

table
.1.3.6.1.4.1.8691.2.21.1.8.4.1 · 1 row entry · 8 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorSerialPortSettingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::monitorSerialPortSettingsTable' 
Serial Port Settings table.
monitorSerialPortSettingsEntry row .1.3.6.1.4.1.8691.2.21.1.8.4.1.1
Serial Port Settings entry.
Indexes
Column Syntax OID
monitorBaudRate
View the current baudrate of the port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.4.1.1.1
monitorDataBits
View the number of bits per byte for the port.
Enumeration
Enumerated Values:
5bits-5
6bits-6
7bits-7
8bits-8
 .1.3.6.1.4.1.8691.2.21.1.8.4.1.1.2
monitorStopBits
View the number of stop bits for the port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.21.1.8.4.1.1.3
monitorParity
View the parity bit for the port.
Enumeration
Enumerated Values:
0none
8odd
24even
40mark
56space
 .1.3.6.1.4.1.8691.2.21.1.8.4.1.1.4
monitorRTSCTSFlowControl
View if the port is using RTS/CTS flow control.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.21.1.8.4.1.1.5
monitorXONXOFFFlowControl
View if the port is using XON/XOFF flow control.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.21.1.8.4.1.1.6
monitorFIFO
View FIFO status of this port.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.21.1.8.4.1.1.7
monitorInterface
View the serial interface that the port is using.
Enumeration
Enumerated Values:
0rs-232
1rs-422
2rs-485-2-wire
3rs-485-4-wire
 .1.3.6.1.4.1.8691.2.21.1.8.4.1.1.8

monitorSerialPortBufferingTable

table
.1.3.6.1.4.1.8691.2.21.1.8.5.1 · 1 row entry · 1 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorSerialPortBufferingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::monitorSerialPortBufferingTable' 
Serial Port Buffering table.
monitorSerialPortBufferingEntry row .1.3.6.1.4.1.8691.2.21.1.8.5.1.1
Serial Port Settings entry.
Indexes
Column Syntax OID
monitorBuffering
View length of buffered data for the port. The length unit is byte.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.5.1.1.1

diMonTable

table
.1.3.6.1.4.1.8691.2.21.1.8.7.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk diMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::diMonTable' 
The DI channel monitor table
diMonEntry row .1.3.6.1.4.1.8691.2.21.1.8.7.1.1.1
The DI channel monitor item
Indexes
Column Syntax OID
diMonIndex
DI - index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.1.1.1.1
diMonMode
DI - mode (0: DI, 1: Counter mode)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.1.1.1.2
diMonStatus
DI - DI mode status (0: OFF, 1: ON) or Counter mode value
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.1.1.1.3
diMonFilter
DI - filter setting (unit: 12.5 ms)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.1.1.1.4
diMonTrigger
DI - Counter mode - event (0: Rising Edge, 1: Falling Edge, 2: Both)
Enumeration
Enumerated Values:
0loToHigh
1highToLow
2both
 .1.3.6.1.4.1.8691.2.21.1.8.7.1.1.1.5
diMonCntStart
DI - Counter mode - status (0: STOP, 1: START)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.1.1.1.6

doMonTable

table
.1.3.6.1.4.1.8691.2.21.1.8.7.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk doMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-IAW5x50A_IO-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-IAW5x50A_IO-MIB::doMonTable' 
The DO channel monitor table
doMonEntry row .1.3.6.1.4.1.8691.2.21.1.8.7.2.1.1
The DO channel monitor item
Indexes
Column Syntax OID
doMonIndex
DO - index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.2.1.1.1
doMonMode
DO - mode (0: DO, 1: Pulse)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.2.1.1.2
doMonStatus
DO - DO mode status (0: OFF, 1: ON) or Pulse mode count
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.2.1.1.3
doMonPulseOnWidth
DO - Pulse mode - ON width (unit: 25 ms)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.2.1.1.4
doMonPulseOffWidth
DO - Pulse mode - OFF width (unit: 25 ms)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.2.1.1.5
doMonPulseStart
DO - Pulse mode - status (0: STOP, 1: START)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.21.1.8.7.2.1.1.6