MOXA-EDSP510A8POE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
36
Rows
36
Columns
141

portTable

table
.1.3.6.1.4.1.8691.7.86.1.9.1 · 1 row entry · 7 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::portTable' 
The port table.
portEntry row .1.3.6.1.4.1.8691.7.86.1.9.1.1
The port entry.
Indexes
Column Syntax OID
portIndex
The port index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.9.1.1.1
portDesc
The port description
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.9.1.1.2
portEnable
This enable the port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.9.1.1.3
portSpeed
The port speed and duplex.
Enumerationr/w
Enumerated Values:
0auto
1speed100M-Full
2speed100M-Half
3speed10M-Full
4speed10M-Half
5speed1000M-Full
 .1.3.6.1.4.1.8691.7.86.1.9.1.1.4
portMDI
The port MDI/MDIX.
Enumerationr/w
Enumerated Values:
0na
1auto
2mdi
3mdiX
 .1.3.6.1.4.1.8691.7.86.1.9.1.1.5
portFDXFlowCtrl
The port FDX Flow Control
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.9.1.1.6
portName
The port Name
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.9.1.1.7

monitorPortTable

table
.1.3.6.1.4.1.8691.7.86.1.10.3 · 1 row entry · 7 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::monitorPortTable' 
The  port table of monitor function.
monitorPortEntry row .1.3.6.1.4.1.8691.7.86.1.10.3.1
The port table entry of monitor function.
Indexes
Column Syntax OID
monitorLinkStatus
The port link status.
Enumeration
Enumerated Values:
-1disable
0off
1on
 .1.3.6.1.4.1.8691.7.86.1.10.3.1.2
monitorSpeed
The port speed and duplex status.
Enumeration
Enumerated Values:
-1na
0speed10M-Half
1speed10M-Full
2speed100M-Half
3speed100M-Full
4speed1000M-Half
5speed1000M-Full
 .1.3.6.1.4.1.8691.7.86.1.10.3.1.3
monitorAutoMDI
The port MDI/MDIX status.
Enumeration
Enumerated Values:
-1na
0mdi
1mdiX
 .1.3.6.1.4.1.8691.7.86.1.10.3.1.4
monitorTraffic
The traffic loading percentage of port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.10.3.1.5
monitorFDXFlowCtrl
The Full-Duplex flow control status
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.7.86.1.10.3.1.6
monitorTxTraffic
The TX traffic loading percentage of port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.10.3.1.7
monitorRxTraffic
The RTX traffic loading percentage of port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.10.3.1.8

monitorDiTable

table
.1.3.6.1.4.1.8691.7.86.1.10.4 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorDiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::monitorDiTable' 
The DI table of monitor function.
monitorDiEntry row .1.3.6.1.4.1.8691.7.86.1.10.4.1
The DI table entry of monitor function.
Indexes
Column Syntax OID
diIndex
The DI index of monitor function
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.8691.7.86.1.10.4.1.1
diInputStatus
The DI input status.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.7.86.1.10.4.1.2

monitorSFPTable

table
.1.3.6.1.4.1.8691.7.86.1.10.7 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorSFPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::monitorSFPTable' 
The SFP table of monitor function.
monitorSFPEntry row .1.3.6.1.4.1.8691.7.86.1.10.7.1
The SFP table entry of monitor function.
Indexes
Column Syntax OID
sfpPort
The SPF index of monitor function
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.10.7.1.1
sfpModelName
The SPF ModelName of monitor function
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.10.7.1.2
sfpTemperature
The SPF Temperature of monitor function
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.10.7.1.3
sfpVoltage
The SPF Voltage of monitor function
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.10.7.1.4
sfpTxPower
The SPF TX power of monitor function
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.10.7.1.5
sfpRXPower
The SPF RX power of monitor function
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.10.7.1.6

emailWarningEventPortTable

table
.1.3.6.1.4.1.8691.7.86.1.11.3 · 1 row entry · 5 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk emailWarningEventPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::emailWarningEventPortTable' 
The port table of the email warning event.
emailWarningEventPortEntry row .1.3.6.1.4.1.8691.7.86.1.11.3.1
The port table entry of the email warning event.
Indexes
Column Syntax OID
emailWarningEventPortLinkOn
The port link on event of email warning function.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.11.3.1.2
emailWarningEventPortLinkOff
The port link off event of email warning function.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.11.3.1.3
emailWarningEventPortTrafficOverload
The port's traffic overloading event of email warning function.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.11.3.1.4
emailWarningEventPortRxTrafficThreshold
The port's traffic threshold of the overloading event.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.11.3.1.5
emailWarningEventPortTrafficDuration
The port's traffic duration of the overloading event.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.11.3.1.6

emailWarningEventDiTable

table
.1.3.6.1.4.1.8691.7.86.1.11.4 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk emailWarningEventDiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::emailWarningEventDiTable' 
The DI table of the email warning event.
emailWarningEventDiEntry row .1.3.6.1.4.1.8691.7.86.1.11.4.1
The DI table entry of the email warning event.
Indexes
Column Syntax OID
emailWarningEventDiInputOn2Off
The DI input off event of email warning function .
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.11.4.1.1
emailWarningEventDiInputOff2On
The DI input on event of email warning function.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.11.4.1.2

setDevIpTable

table
.1.3.6.1.4.1.8691.7.86.1.12.1 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk setDevIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::setDevIpTable' 
The set device IP table.
setDevIpEntry row .1.3.6.1.4.1.8691.7.86.1.12.1.1
The set device IP table entry.
Indexes
Column Syntax OID
setDevIpIndex
The set device IP index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.12.1.1.1
setDevIpCurrentIpofDevice
The current IP address of connected to this port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.12.1.1.2
setDevIpPresentBy
The protocol used that assigning IP to the device.
Enumeration
Enumerated Values:
0no
1dhcpClient
2rarp
4bootp
 .1.3.6.1.4.1.8691.7.86.1.12.1.1.3
setDevIpDedicatedIp
The IP address when assign to the device connected to this port.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.7.86.1.12.1.1.4

trunkSettingTable

table
.1.3.6.1.4.1.8691.7.86.1.14.1 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk trunkSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::trunkSettingTable' 
Port Trunking Setting Table.
trunkSettingEntry row .1.3.6.1.4.1.8691.7.86.1.14.1.1
Port Trunking Setting Entry.
Indexes
Column Syntax OID
trunkSettingIndex
Trunking Group Index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.14.1.1.1
trunkType
Trunking Group Type.
Enumerationr/w
Enumerated Values:
1static
2lacp
 .1.3.6.1.4.1.8691.7.86.1.14.1.1.2
trunkMemberPorts
Trunking Group Member Ports.
PortListr/w .1.3.6.1.4.1.8691.7.86.1.14.1.1.3

trunkTable

table
.1.3.6.1.4.1.8691.7.86.1.14.2 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk trunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::trunkTable' 
Port Trunking Table.
trunkEntry row .1.3.6.1.4.1.8691.7.86.1.14.2.1
Port Trunking Entry.
Indexes
Column Syntax OID
trunkIndex
Trunking Group Index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.14.2.1.1
trunkPort
Trunking Group Member Port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.14.2.1.2
trunkStatus
Trunking Port Status.
Enumeration
Enumerated Values:
1success
2fail
3standby
 .1.3.6.1.4.1.8691.7.86.1.14.2.1.3

turboRingPortTable

table
.1.3.6.1.4.1.8691.7.86.1.16.2.3 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk turboRingPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::turboRingPortTable' 
Turbo Ring Port Table.
turboRingPortEntry row .1.3.6.1.4.1.8691.7.86.1.16.2.3.1
Turbo Ring Port Entry.
Indexes
Column Syntax OID
turboRingPortIndex
Turbo Ring Port Index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.16.2.3.1.1
turboRingPortStatus
Turbo Ring Port Status.
Enumeration
Enumerated Values:
0portDisabled
1notTurboRingPort
2linkDown
3blocked
4learning
5forwarding
 .1.3.6.1.4.1.8691.7.86.1.16.2.3.1.2
turboRingPortDesignatedBridge
The MAC address of the bridge which this
port considers to be the Designated Bridge for
this port's segment.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.8691.7.86.1.16.2.3.1.3
turboRingPortDesignatedPort
The Port Number of the port on the Designated
Bridge for this port's segment.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.16.2.3.1.4

spanningTreeTable

table
.1.3.6.1.4.1.8691.7.86.1.16.3.6 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk spanningTreeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::spanningTreeTable' 
The spanning tree table.
spanningTreeEntry row .1.3.6.1.4.1.8691.7.86.1.16.3.6.1
The spanning tree port entry.
Indexes
Column Syntax OID
spanningTreeIndex
The index of spanning tree table.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.1
enableSpanningTree
This enable of spanning tree protocol for this port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.2
spanningTreePortPriority
The port priority of spanning tree protocol.
Enumerationr/w
Enumerated Values:
0priority0
16priority16
32priority32
48priority48
64priority64
80priority80
96priority96
112priority112
128priority128
144priority144
160priority160
176priority176
192priority192
208priority208
224priority224
240priority240
 .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.3
spanningTreePortCost
The port cost of spanning tree protocol.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.4
spanningTreePortStatus
The port status of spanning tree protocol.
Enumeration
Enumerated Values:
0portDisabled
1notSpanningTreePort
2linkDown
3blocked
4learning
5forwarding
 .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.5
spanningTreePortEdge
This configures the Edge Port property for this port.
Enumerationr/w
Enumerated Values:
0auto
1forceEdge
2false
 .1.3.6.1.4.1.8691.7.86.1.16.3.6.1.6

relayWarningTable

table
.1.3.6.1.4.1.8691.7.86.1.17.11 · 1 row entry · 9 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk relayWarningTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::relayWarningTable' 
The relay warning table.
relayWarningEntry row .1.3.6.1.4.1.8691.7.86.1.17.11.1
Relay Warning Entry.
Indexes
Column Syntax OID
relayAlarmIndex
The Relay alarm index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.17.11.1.1
relayWarningRelayContact
The first Relay contact status.
Enumeration
Enumerated Values:
0closed
1opened
 .1.3.6.1.4.1.8691.7.86.1.17.11.1.2
overrideRelayWarningSetting
Override the relay warning setting.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.7.86.1.17.11.1.3
relayWarningPower1Off
The relay contact will be opened while the first power input off.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.17.11.1.4
relayWarningPower1OffStatus
The relay contact is opened as the first power input off..
Enumeration
Enumerated Values:
0not-triggered
1triggered
 .1.3.6.1.4.1.8691.7.86.1.17.11.1.5
relayWarningPower2Off
The relay contact will be opened while the second power input off.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.17.11.1.6
relayWarningPower2OffStatus
The relay contact is opened as the second power input off.
Enumeration
Enumerated Values:
0not-triggered
1triggered
 .1.3.6.1.4.1.8691.7.86.1.17.11.1.7
relayWarningTurboRingBreak
The relay contact will be opened while turbo ring break.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.17.11.1.8
relayWarningTurboRingBreakStatus
The relay contact is opened while turbo ring is broken.
Enumeration
Enumerated Values:
0not-triggered
1triggered
 .1.3.6.1.4.1.8691.7.86.1.17.11.1.9

portRelayWarningTable

table
.1.3.6.1.4.1.8691.7.86.1.17.12 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk portRelayWarningTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::portRelayWarningTable' 
The relay warning port table.
portRelayWarningEntry row .1.3.6.1.4.1.8691.7.86.1.17.12.1
Port Relay Warning Entry.
Indexes
Column Syntax OID
relayWarningLinkChanged
The relay contact will be opened while this port's link status is changed.
Enumerationr/w
Enumerated Values:
0ignore
1on2off
2off2on
 .1.3.6.1.4.1.8691.7.86.1.17.12.1.1
relayWarningLinkChangedStatus
The relay contact is opened as this port's link status is changed.
Enumeration
Enumerated Values:
0not-triggered
1triggered
 .1.3.6.1.4.1.8691.7.86.1.17.12.1.2
relayWarningTrafficOverload
The relay contact will be opened while this port's traffic is overload.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.17.12.1.3
relayWarningTrafficOverloadStatus
The relay contact is opened as this port's traffic is overload.
Enumeration
Enumerated Values:
0not-triggered
1triggered
 .1.3.6.1.4.1.8691.7.86.1.17.12.1.4
relayWarningRxTrafficThreshold
The threshold of the port traffic will be over loading.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.17.12.1.5
relayWarningTrafficDuration
The duration of the port traffic will be over loading.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.17.12.1.6

diRelayWarningTable

table
.1.3.6.1.4.1.8691.7.86.1.17.13 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk diRelayWarningTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::diRelayWarningTable' 
The relay warning DI table.
diRelayWarningEntry row .1.3.6.1.4.1.8691.7.86.1.17.13.1
DI Relay Warning Entry.
Indexes
Column Syntax OID
relayWarningDiInputChanged
The relay contact will be opened while the DI input changed.
Enumerationr/w
Enumerated Values:
0disable
1off
2on
 .1.3.6.1.4.1.8691.7.86.1.17.13.1.1
relayWarningDiInputChangedStatus
The relay contact is opened as the first DI input changed..
Enumeration
Enumerated Values:
0not-triggered
1triggered
 .1.3.6.1.4.1.8691.7.86.1.17.13.1.2

qosPortTable

table
.1.3.6.1.4.1.8691.7.86.1.18.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk qosPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::qosPortTable' 
The QoS port table.
qosPortEntry row .1.3.6.1.4.1.8691.7.86.1.18.1.2.1
The QoS Port Entry.
Indexes
Column Syntax OID
inspectTos
This enable the inspection of TOS field.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.7.86.1.18.1.2.1.1
inspectCos
This enable the inspection of CoS field.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.7.86.1.18.1.2.1.2
portPriority
The default priority of the port.
Enumerationr/w
Enumerated Values:
0priority0
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
 .1.3.6.1.4.1.8691.7.86.1.18.1.2.1.3

cosMappingTable

table
.1.3.6.1.4.1.8691.7.86.1.18.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk cosMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::cosMappingTable' 
The COS mapping table.
cosMappingEntry row .1.3.6.1.4.1.8691.7.86.1.18.2.1.1
The COS mapping Entry.
Indexes
Column Syntax OID
cosTag
The cos tag of TOS field.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.8691.7.86.1.18.2.1.1.1
cosMappedPriority
The frame's priority corresponding to it's COS tag value.
Enumerationr/w
Enumerated Values:
0low
1normal
2medium
3high
 .1.3.6.1.4.1.8691.7.86.1.18.2.1.1.2

tosMappingTable

table
.1.3.6.1.4.1.8691.7.86.1.18.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk tosMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::tosMappingTable' 
The TOS mapping table.
tosMappingEntry row .1.3.6.1.4.1.8691.7.86.1.18.3.1.1
TOS mapping Entry.
Indexes
Column Syntax OID
tosClass
The TOS class of TOS field.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.18.3.1.1.1
tosMappedPriority
The frame's priority corresponding to it's TOS class value.
Enumerationr/w
Enumerated Values:
0low
1normal
2medium
3high
 .1.3.6.1.4.1.8691.7.86.1.18.3.1.1.2

vlanPortSettingTable

table
.1.3.6.1.4.1.8691.7.86.1.19.1 · 1 row entry · 5 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk vlanPortSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::vlanPortSettingTable' 
The vlan setting table of ports.
vlanPortSettingEntry row .1.3.6.1.4.1.8691.7.86.1.19.1.1
Port Setting Entry of VLAN.
Indexes
Column Syntax OID
portVlanType
The vlan type of port.
Enumerationr/w
Enumerated Values:
0access
1trunk
2hybrid
 .1.3.6.1.4.1.8691.7.86.1.19.1.1.1
portDefaultVid
The PVID of port.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8691.7.86.1.19.1.1.2
portFixedVid
The fixed vids of (trunk) port.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.19.1.1.3
portForbiddenVid
The forbidden vids of (trunk)port.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.19.1.1.4
portFixedVidUntag
The fixed untag vids of (trunk) port.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.19.1.1.5

vlanTable

table
.1.3.6.1.4.1.8691.7.86.1.19.2 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk vlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::vlanTable' 
The VLAN table.
vlanEntry row .1.3.6.1.4.1.8691.7.86.1.19.2.1
VLAN Entry.
Indexes
Column Syntax OID
vlanId
The VLAN id.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8691.7.86.1.19.2.1.1
joinedAccessPorts
The access ports that joined this VID.
PortList .1.3.6.1.4.1.8691.7.86.1.19.2.1.2
joinedTrunkPorts
The trunk ports that joined this VID.
PortList .1.3.6.1.4.1.8691.7.86.1.19.2.1.3
joinedHybridPorts
The hybrid ports that joined this VID.
PortList .1.3.6.1.4.1.8691.7.86.1.19.2.1.4

portbaseVlanSettingTable

table
.1.3.6.1.4.1.8691.7.86.1.19.5 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk portbaseVlanSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::portbaseVlanSettingTable' 
Port base Vlan Setting Table.
portbaseVlanSettingEntry row .1.3.6.1.4.1.8691.7.86.1.19.5.1
Port base Vlan Setting Entry.
Indexes
Column Syntax OID
portbaseVlanSettingIndex
port base Vlan Group Index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.19.5.1.1
portbaseVlanMemberPorts
port base Vlan Group Member Ports.
PortListr/w .1.3.6.1.4.1.8691.7.86.1.19.5.1.2

igmpSnoopingSettingTable

table
.1.3.6.1.4.1.8691.7.86.1.20.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk igmpSnoopingSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::igmpSnoopingSettingTable' 
The IGMP snooping setting table.
igmpSnoopingSettingEntry row .1.3.6.1.4.1.8691.7.86.1.20.1.2.1
The IGMP snooping setting Entry.
Indexes
Column Syntax OID
enableIgmpSnooping
This enable the IGMP snooping function in this VLAN.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.20.1.2.1.1
enableQuerier
This enable the querier function for this VLAN.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.20.1.2.1.2
fixedMulticastQuerierPorts
The ports that multicast-Querier exist.
PortListr/w .1.3.6.1.4.1.8691.7.86.1.20.1.2.1.3
learnedMulticastQuerierPorts
The ports that multicast-Querier exist.
PortList .1.3.6.1.4.1.8691.7.86.1.20.1.2.1.4

staticMulticastTable

table
.1.3.6.1.4.1.8691.7.86.1.20.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk staticMulticastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::staticMulticastTable' 
The static multicast table.
staticMulticastEntry row .1.3.6.1.4.1.8691.7.86.1.20.2.1.1
Static multicast Entry.
Indexes
Column Syntax OID
staticMulticastAddress
The static multicast address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.8691.7.86.1.20.2.1.1.1
staticMulticastPorts
The port map of the static multicast address.
PortListr/w .1.3.6.1.4.1.8691.7.86.1.20.2.1.1.2
staticMulticastStatus
The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then active.
Use destroy to delete this row.
Enumerationr/w
Enumerated Values:
1active
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8691.7.86.1.20.2.1.1.3

gmrpSettingTable

table
.1.3.6.1.4.1.8691.7.86.1.20.3.1 · 1 row entry · 1 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk gmrpSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::gmrpSettingTable' 
The GMRP setting table.
gmrpSettingEntry row .1.3.6.1.4.1.8691.7.86.1.20.3.1.1
The GMRP Setting Entry.
Indexes
Column Syntax OID
enableGMRP
Enable/Disable GMRP.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.20.3.1.1.1

gmrpTable

table
.1.3.6.1.4.1.8691.7.86.1.20.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk gmrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::gmrpTable' 
The GMRP status table.
gmrpEntry row .1.3.6.1.4.1.8691.7.86.1.20.3.2.1
The GMRP Status Entry.
Indexes
Column Syntax OID
gmrpMulticastGroup
GMRP multicast group.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.8691.7.86.1.20.3.2.1.1
gmrpFixedPorts
The ports that joined GMRP multicast group manually.
PortList .1.3.6.1.4.1.8691.7.86.1.20.3.2.1.2
gmrpLearnedPorts
The ports that joined GMRP multicast group by GMRP learning.
PortList .1.3.6.1.4.1.8691.7.86.1.20.3.2.1.3

normalModeRateLimitingIngressTable

table
.1.3.6.1.4.1.8691.7.86.1.21.1 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk normalModeRateLimitingIngressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::normalModeRateLimitingIngressTable' 
The rate limiting table.
normalModeRateLimitingIngressEntry row .1.3.6.1.4.1.8691.7.86.1.21.1.1
Rate limiting Entry.
Indexes
Column Syntax OID
limitMode
The limit mode.
Enumerationr/w
Enumerated Values:
0all
1bmucast
2bmcast
3bcast
 .1.3.6.1.4.1.8691.7.86.1.21.1.1.1
lowPriLimitRate
The limiting rate of low priority queue.
Enumerationr/w
Enumerated Values:
0notlimit
1limit128k
2limit256k
3limit512k
4limit1M
5limit2M
6limit4M
7limit8M
 .1.3.6.1.4.1.8691.7.86.1.21.1.1.2
normalPriLimitRate
The limiting rate of normal priority queue.
The values being equal to or double value of lowPriLimitRate are valid for set.
Enumerationr/w
Enumerated Values:
0notlimit
1limit128k
2limit256k
3limit512k
4limit1M
5limit2M
6limit4M
7limit8M
8limit16M
 .1.3.6.1.4.1.8691.7.86.1.21.1.1.3
mediumPriLimitRate
The limiting rate of medium priority queue.
The values being equal to or double value of normalPriLimitRate are valid for set.
Enumerationr/w
Enumerated Values:
0notlimit
1limit128k
2limit256k
3limit512k
4limit1M
5limit2M
6limit4M
7limit8M
8limit16M
9limit32M
 .1.3.6.1.4.1.8691.7.86.1.21.1.1.4
highPriLimitRate
The limiting rate of high priority queue.
The values being equal to or double value of mediumPriLimitRate are valid for set.
Enumerationr/w
Enumerated Values:
0notlimit
1limit128k
2limit256k
3limit512k
4limit1M
5limit2M
6limit4M
7limit8M
8limit16M
9limit32M
10limit64M
 .1.3.6.1.4.1.8691.7.86.1.21.1.1.5
egressLimit
The ingress limit mode.
Enumerationr/w
Enumerated Values:
0notlimited
1percentage03
2percentage05
3percentage10
4percentage15
5percentage25
6percentage35
7percentage50
8percentage65
9percentage85
 .1.3.6.1.4.1.8691.7.86.1.21.1.1.6

portDisableModeTable

table
.1.3.6.1.4.1.8691.7.86.1.21.3.2 · 1 row entry · 1 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk portDisableModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::portDisableModeTable' 
The rate limiting table.
portDisableModeEntry row .1.3.6.1.4.1.8691.7.86.1.21.3.2.1
Rate limiting Entry.
Indexes
Column Syntax OID
ingressLimit
The ingress limit mode.
Enumerationr/w
Enumerated Values:
0notlimited
1rateMega1Fps4464
2rateMega2Fps7441
3rateMega3Fps14881
4rateMega4Fps22322
5rateMega5Fps37203
6rateMega6Fps52084
7rateMega7Fps74405
8rateGiga1Fps44640
9rateGiga2Fps74410
10rateGiga3Fps148810
11rateGiga4Fps223220
12rateGiga5Fps372030
13rateGiga6Fps520840
14rateGiga7Fps744050
 .1.3.6.1.4.1.8691.7.86.1.21.3.2.1.1

dot1xSettingTable

table
.1.3.6.1.4.1.8691.7.86.1.22.2.2.7 · 1 row entry · 1 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk dot1xSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::dot1xSettingTable' 
IEEE 802.1X Port Setting Table.
dot1xSettingEntry row .1.3.6.1.4.1.8691.7.86.1.22.2.2.7.1
IEEE 802.1X Port Setting Entry.
Indexes
Column Syntax OID
enableDot1X
Enable/Disable IEEE 802.1X.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.22.2.2.7.1.1

dot1xReauthTable

table
.1.3.6.1.4.1.8691.7.86.1.22.2.2.8 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk dot1xReauthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::dot1xReauthTable' 
IEEE 802.1X Re-authentication Table.
dot1xReauthEntry row .1.3.6.1.4.1.8691.7.86.1.22.2.2.8.1
IEEE 802.1X Re-authentication Entry.
Indexes
Column Syntax OID
dot1xReauthPortIndex
IEEE 802.1X Enabled Port Index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.22.2.2.8.1.1
dot1xReauth
Reauth IEEE 802.1X.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.7.86.1.22.2.2.8.1.2

portAccessControlTable

table
.1.3.6.1.4.1.8691.7.86.1.22.2.3 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk portAccessControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::portAccessControlTable' 
The Port Access Control table.
portAccessControlEntry row .1.3.6.1.4.1.8691.7.86.1.22.2.3.1
The Port Access Control table entry.
Indexes
Column Syntax OID
portAccessControlAddress
The MAC address which is static locked or IEEE 802.1X authorized.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.8691.7.86.1.22.2.3.1.1
portAccessControlPortNo
The port number that the Port Access Control address resides.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.22.2.3.1.2
portAccessControlAccessStatus
The access status of the Port Access Control address.
Enumeration
Enumerated Values:
1staticLock
2authorized
3unAuthorized
4authorizing
 .1.3.6.1.4.1.8691.7.86.1.22.2.3.1.3
portAccessControlStatus
The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then active.
Use destroy to delete this row.
Enumerationr/w
Enumerated Values:
1active
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8691.7.86.1.22.2.3.1.4

accessibleIpTable

table
.1.3.6.1.4.1.8691.7.86.1.30.2 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk accessibleIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::accessibleIpTable' 
accessibleIP.
accessibleIpEntry row .1.3.6.1.4.1.8691.7.86.1.30.2.1
Accessible IP address entry.
Indexes
Column Syntax OID
accessibleIpAddress
Accessible IP address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.7.86.1.30.2.1.1
accessibleIpNetMask
Accessible IP netmask.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.7.86.1.30.2.1.2
accessibleIpStatus
The status is active to indicate normal.
Use createAndGo to create new on multiple SET.
Use createAndWait to create new on one SET all then active.
Use destroy to delete this row.
Enumerationr/w
Enumerated Values:
1active
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.8691.7.86.1.30.2.1.3

dhcpFunctionTable

table
.1.3.6.1.4.1.8691.7.86.1.39.6 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk dhcpFunctionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::dhcpFunctionTable' 
DHCP Function Table.
dhcpFunctionEntry row .1.3.6.1.4.1.8691.7.86.1.39.6.1
DHCP Function Table Entry.
Indexes
Column Syntax OID
dhcpPortIndex
The DHCP Port Index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.39.6.1.1
circuitID
The Circuit ID.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.39.6.1.2
option82Enable
This enable option 82 of the port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.39.6.1.3

poePortTable

table
.1.3.6.1.4.1.8691.7.86.1.40.3 · 1 row entry · 8 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk poePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::poePortTable' 
Poe Port Function Table.
poePortEntry row .1.3.6.1.4.1.8691.7.86.1.40.3.1
Poe Port Function Table Entry.
Indexes
Column Syntax OID
poePortIndex
PoE port index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.3.1.1
poePortEnable
PoE port Enable.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.40.3.1.2
poePowerOutputMode
PoE port Power Output Mode.
Enumerationr/w
Enumerated Values:
0auto
1highPower
2force
 .1.3.6.1.4.1.8691.7.86.1.40.3.1.3
powerLimit
PoE Port Power Budget
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.3.1.4
pdfailure
PD check Enable per port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.40.3.1.5
pdipaddr
PD ip address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.40.3.1.6
pdPollingInterval
PD check interval
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.3.1.7
poeporttimetabling
PoE port timetabling
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.40.3.1.8

poeTimeTable

table
.1.3.6.1.4.1.8691.7.86.1.40.5 · 1 row entry · 5 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk poeTimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::poeTimeTable' 
PoE Time Table.
poeTimeEntry row .1.3.6.1.4.1.8691.7.86.1.40.5.1
PoE Time Table Entry.
Indexes
Column Syntax OID
poeTPortIndex
port Index for time table.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.5.1.1
poeWeekDay
day index for a week.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.5.1.2
poeDayEnable
Enable or not for one day.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.40.5.1.3
poeDayStart
PoE Port Start Time
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.5.1.4
poeDayStop
PoE Port Stop Time
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.5.1.5

poeStatusTable

table
.1.3.6.1.4.1.8691.7.86.1.40.6 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk poeStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::poeStatusTable' 
PoE Status Table.
poeStatusEntry row .1.3.6.1.4.1.8691.7.86.1.40.6.1
PoE Status Table Entry.
Indexes
Column Syntax OID
poePortStatus
PoE port Status.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.40.6.1.1
poePortConsumption
PoE port Consumption
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.6.1.2
poePortVoltage
PoE port Voltage
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.6.1.3
poePortCurrent
PoE port Current
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.40.6.1.4

ptpPortTable

table
.1.3.6.1.4.1.8691.7.86.1.41.5 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk ptpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::ptpPortTable' 
The ptp port table.
ptpPortEntry row .1.3.6.1.4.1.8691.7.86.1.41.5.1
The ptp port entry.
Indexes
Column Syntax OID
ptpPortIndex
The ptp port index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.41.5.1.1
ptpPortEnable
This enable the ptp port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.7.86.1.41.5.1.2
ptpPortStatus
This port status of the PTP clock.
Enumeration
Enumerated Values:
0ptpInitializing
1ptpFaulty
2ptpDisabled
3ptpListening
4ptpPreMaster
5ptpMaster
6ptpPassive
7ptpUncalibrated
8ptpSlave
 .1.3.6.1.4.1.8691.7.86.1.41.5.1.3

eventlogTable

table
.1.3.6.1.4.1.8691.7.86.1.46.1 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk eventlogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-EDSP510A8POE-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-EDSP510A8POE-MIB::eventlogTable' 
The table of eventlog.
eventlogEntry row .1.3.6.1.4.1.8691.7.86.1.46.1.1
The table entry of eventlog.
Indexes
Column Syntax OID
eventlogIndex
The index of eventlog entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.46.1.1.1
eventlogBootup
The reboot count of the system.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.7.86.1.46.1.1.2
eventlogDate
The date of the event occurred.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.46.1.1.3
eventlogTime
The time of the event occurred.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.46.1.1.4
eventlogUptime
The time of the event occurred after booting up.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.46.1.1.5
eventlogEvent
The event which occurred in the system.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.7.86.1.46.1.1.6