MLD-SNOOPING-MIB Table View

The table controls the VLAN's MLD function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN is in 
disabled mode, there is only one entry in the table, with 
index 1. If the VLAN is in Port-Base or 802.1q mode, the number of 
entries can be up to 12, with an index range from 1 to 12.

swMldSnoopingCtrlEntry row .1.3.6.1.4.1.171.12.34.3.2.1

The entry in MLD control table (swMldSnoopingCtrlTable). The entry
is effective only when MLD capture switch
(swMldSnoopingGlobalState) is enabled.

Indexes

swMldSnoopingCtrlVid

Column	Syntax	OID
swMldSnoopingCtrlVid This object indicates the MLD control entry's VLAN ID. If the VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the VID is arranged from 1 to 12, fixed form. …	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.34.3.2.1.1
swMldSnoopingQueryInterval The frequency at which MLD Host-Query packets are transmitted on this switch.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.12.34.3.2.1.2
swMldSnoopingMaxResponseTime The maximum query response time on this switch.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.171.12.34.3.2.1.3
swMldSnoopingRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high loss, the Robustness Variable may be increased. MLD is robust to (Robustness Variable-1) packet loss…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.12.34.3.2.1.4
swMldSnoopingLastMemberQueryInterval The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages and is also the amount of time between Group-Specific Query messages.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.171.12.34.3.2.1.5
swMldSnoopingHostTimeout The timer value for sending a MLD query packet when none were sent by the host in the LAN. The timer works on a per-VLAN basis. Our device will be activated to send a query message if the timer has expired.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.12.34.3.2.1.6
swMldSnoopingRouteTimeout The Router Timeout is how long a host must wait after hearing a Query before it sends any MLD messages.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.12.34.3.2.1.7
swMldSnoopingDoneTimer When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries swMldSnoopingDoneTimer to the group that is left.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.12.34.3.2.1.8
swMldSnoopingQueryState This object decides if the MLD query is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.12.34.3.2.1.9
swMldSnoopingCurrentState This object indicates the current MLD query state.	Enumeration Enumerated Values: 1 other 2 querier 3 non-querier	.1.3.6.1.4.1.171.12.34.3.2.1.10
swMldSnoopingCtrlState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disable(2…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.12.34.3.2.1.11
swMldSnoopingFastDoneState This object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.12.34.3.2.1.12
swMldSnoopingVersion This object indicates the MLD version of this entry. If the MLD version is configured with a lower version, the higher version's MLD Report/Leave messages will be ignored.	Enumerationr/w Enumerated Values: 1 version-1 2 version-2	.1.3.6.1.4.1.171.12.34.3.2.1.13

The table contains the current MLD snooping information captured by
this device, provided that swMldSnoopingGlobalState and
swMldSnoopingCtrlState of associated VLAN entries are all enabled. Note
that the priority of MLD table entries is lower than the Filtering
Table, i.e. if there is a table hash collision between the
entries of the MLD Table and the Filtering Table inside the switch H/W
address table, then the Filtering Table entry overwrites the
colliding entry of the MLD snooping Table.

swMldSnoopingGroupInfoEntry row .1.3.6.1.4.1.171.12.34.3.3.1

Information about current MLD information which has been captured
by this device, provided that swMldSnoopingGlobalState and
swMldSnoopingCtrlState of the associated VLAN entries are all enabled.

Indexes

swMldSnoopingGroupInfoVid swMldSnoopingGroupInfoIpAddr

Column	Syntax	OID
swMldSnoopingGroupInfoVidobsolete This object indicates the VID of an individual MLD table entry. It shows the VID of MLD report information that has been captured on the network.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.34.3.3.1.1
swMldSnoopingGroupInfoIpAddrobsolete This object identifies the group IP address which is captured from the MLD packet, on a per-VLAN basis.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.12.34.3.3.1.2
swMldSnoopingGroupInfoMacAddrobsolete This object identifies the MAC addresses that correspond to swMldSnoopingGroupInfoIpAddr, on a per-VLAN basis.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.12.34.3.3.1.3
swMldSnoopingGroupInfoPortMapobsolete This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string to indicate the port map. The most significant bit represents the lowest numbered port,…	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.34.3.3.1.4
swMldSnoopingGroupInfoReportCountobsolete This object indicates how many report packets were received by our device corresponding with the entry when the MLD function is enabled, on a per-VLAN basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.34.3.3.1.5

This table controls the VLAN's MLD router ports function.

swMldSnpRouterPortsEntry row .1.3.6.1.4.1.171.12.34.3.4.1

This entry shows the MLD router ports table (swMldSnoopingCtrlTable).

Indexes

swMldSnpRouterPortsVid

Column	Syntax	OID
swMldSnpRouterPortsVid This object indicates the MLD router ports entry VLAN ID. If a VLAN is disabled, the VID is always 0 and cannot be changed by management users. If a VLAN is in Port-Base mode, the VID is arranged from 1 to 12, fixed for…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.34.3.4.1.1
swMldSnpRouterStaticPortList Displays router ports that have been statically configured.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.34.3.4.1.2
swMldSnpRouterDynamicPortList Displays router ports that have been dynamically configured.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.34.3.4.1.3
swMldSnpRouterForbiddenPortList Displays router ports that have been configured to be forbidden.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.34.3.4.1.4

The table contains the current MLD snooping information captured by
the device, provided that the swMldSnoopingGlobalState and
swMldSnoopingCtrlState of the associated VLAN entries are all enabled. Note
that the priority of the MLD table entries is lower than the Filtering
Table, i.e. if there is a table hash collision between the
entries of the MLD Table and the Filtering Table inside the switch H/W
address table, then the Filtering Table entry overwrites the
colliding entry of the MLD snooping Table.

swMldSnoopingGroupEntry row .1.3.6.1.4.1.171.12.34.3.5.1

Information about the current MLD information which has been captured by
the device, provided that swMldSnoopingGlobalState and
swMldSnoopingCtrlState of the associated VLAN entries are all enabled.

Indexes

swMldSnoopingGroupVid swMldSnoopingGroupGroupAddr swMldSnoopingGroupSourceAddr

Column	Syntax	OID
swMldSnoopingGroupVid This object indicates the VID of the individual MLD table entry. It shows the VID of the MLD report information captured on the network.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.34.3.5.1.1
swMldSnoopingGroupGroupAddr This object identifies the group IP address which has been captured from the MLD packet, on a per-VLAN basis.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.12.34.3.5.1.2
swMldSnoopingGroupSourceAddr This object identifies the source addresses which correspond to swMldSnoopingGroupInfoGroupAddr, on a per-VLAN basis.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.12.34.3.5.1.3
swMldSnoopingGroupIncludePortMap This object indicates the port list under INCLUDE mode.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.34.3.5.1.4
swMldSnoopingGroupExcludePortMap This object indicates the port list under EXCLUDE mode.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.34.3.5.1.5

This table contains the MLD Snooping forwarding information.

swMldSnpForwardingEntry row .1.3.6.1.4.1.171.12.34.3.6.1

A list of information about MLD Snooping forwarding.

Indexes

swMldSnpVid swMldSnpSourceIpAddr swMldSnpMutiGroupIpAddr

Column	Syntax	OID
swMldSnpVid This object indicates the MLD Forwarding entry's VLAN ID.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.34.3.6.1.1
swMldSnpSourceIpAddr This object identifies the forwarding IP address, which is captured from the MLD packet.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.12.34.3.6.1.2
swMldSnpMutiGroupIpAddr This object identifies the Multicast Group IP address, which is captured from MLD packet.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.12.34.3.6.1.3
swMldSnpForwardingListenPort Indicates the MLD Snooping forwarding listen port.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.34.3.6.1.4