MITEL-ROUTERGROUP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
17

mitelIpRouteTable

table
.1.3.6.1.4.1.1027.4.8.1.5.1 · 1 row entry · 17 columns
Open in standard view
Uses the mitel variant from /opt/observium/mibs/mitel.
Command help
Walk mitelIpRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-ROUTERGROUP-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-ROUTERGROUP-MIB::mitelIpRouteTable' 
This table is a list of IP Routing Entries.
mitelIpRouteEntry row .1.3.6.1.4.1.1027.4.8.1.5.1.1
Each entry in this table contains information of an IP Route Entry.
Indexes
Column Syntax OID
mitelIpRouteTblDestAddress
The IP address of the destination network
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.1
mitelIpRouteTblGateAddress
The Destination Gateway IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.2
mitelIpRouteTblNetmaskAddress
Specifies the netmask to apply to this network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.3
mitelIpRouteTblIfIndex
Specifies the IfIndex to use as a key into the table. 0 & 1 are not used
Integer32r/w
Constraints:
range: 2-13
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.4
mitelIpRouteTblMetric1
Metric 1
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.5
mitelIpRouteTblMetric2
Metric 2
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.6
mitelIpRouteTblMetric3
Metric 3
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.7
mitelIpRouteTblMetric4
Metric 4
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.8
mitelIpRouteTblMetric5
Metric 5
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.9
mitelIpRouteTblRouteType
Specifies what kind of route this is.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.10
mitelIpRouteTblRouteProto
Specifies what protocol to use for the routing table entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.11
mitelIpRouteTblRouteAge
Specifies the age of the route entry in the table.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.12
mitelIpRouteTblBlockLearning
If enabled will block the learned route in question
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.13
mitelIpRouteTblInUse
Specifies whether this routing entry is in use or not
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.14
mitelIpRouteTblDisableLearned
Determines whether learned routes should be disabled or not
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.15
mitelIpRouteTblConvertStatic
An action to convert a learned route into a static route.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.16
mitelIpRouteTblRowStatus
The current status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1027.4.8.1.5.1.1.17