MITEL-LOGICAL-MIB Table View

A table containing information about logical LAN
destinations.

mitelLogGrpLogicalEntry row .1.3.6.1.4.1.1027.4.8.1.4.1.1

Each entry of this table contains information about
a specific logical interface to a local area network.
Each logical LAN can support routing
functions, these are considered virtual interfaces.
The logical LAN can be p…

Indexes

mitelLogicalTblIndex

Column	Syntax	OID
mitelLogicalTblIndex This object identifies the instance of this entry in the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1027.4.8.1.4.1.1.1
mitelLogicalTblDestName The Ascii string associated with this logical destination LAN. Default is Net N (N is mitelLogicalTblIndex).	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.1027.4.8.1.4.1.1.2
mitelLogicalTblType This object determines whether this network interface is locally connected to a LAN or is connected to a LAN via a WAN. If this object is set to local(1) then this interface is associated with one of the physical LAN in…	Enumeration Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.1027.4.8.1.4.1.1.3
mitelLogicalTblAdminStatus The current desired state of this sub-layer. Default is down.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.1027.4.8.1.4.1.1.4

A table containing configuration parameters for
wide area network connections to logical LAN destinations
that are accessible via interfaces. Each entry
is logically tied to a logical LAN destination entry
via mitelLogicalTblIndex.

mitelLogGrpLogicalWanEntry row .1.3.6.1.4.1.1027.4.8.1.4.2.1

Each entry of this table contains information about
a specific logical interface to a REMOTELY connected
local area network. The instance of mitelLogicalTblIndex
used to index into this table is the same instance value
…

Indexes

mitelLogicalTblIndex

Column	Syntax	OID
mitelLogWanTblCmprsn This object indicates whether or not this interface is to perform data compression. Default is none.	Enumerationr/w Enumerated Values: 1 none 2 any 3 gandalf 4 stac	.1.3.6.1.4.1.1027.4.8.1.4.2.1.1
mitelLogWanTblCmprsnStatus This object describes the type of compression used on this destination.	Enumeration Enumerated Values: 1 none 2 fza 3 fzap 4 concryption 5 encryption 6 stacNoCheckMode 7 stacLCBCheckMode 8 stacCRCCheckMode 9 stacSeqNumbers 10 stacExtendedMode 11 stacAscendLCBMode	.1.3.6.1.4.1.1027.4.8.1.4.2.1.2
mitelLogWanTblEncryptn This object describes whether or not PPP encryption is proposed to the peer. Default is disabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1027.4.8.1.4.2.1.3
mitelLogWanTblBackupOvrflow This object determines if this interface is to attempt to bring up another link to the same destination if the traffic over the primary link exceeds a pre-determined threshold, in the case of overflow(3). Otherwise, if …	Enumerationr/w Enumerated Values: 1 disabled 2 backup 3 overflow	.1.3.6.1.4.1.1027.4.8.1.4.2.1.4
mitelLogWanTblThshld This object determines the transmit threshold which when exceeded will cause an attempt to bring up another path. The returned value of this object has no meaning when threshold overflow is not enabled. Default is 80.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.1027.4.8.1.4.2.1.5
mitelLogWanTblConnTimer When threshold overflow is enabled this object determines the amount of time in seconds that the average threshold must be exceeded (or below) before another link is established (or disconnected). Default is 30.	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.1027.4.8.1.4.2.1.6
mitelLogWanTblDiscTimer The time a non-permanent link will remain connected without traffic. Default is 30.	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.1027.4.8.1.4.2.1.7
mitelLogWanTblProtocolType The protocol type that this destination is over. Default is ppp.	Enumerationr/w Enumerated Values: 1 ppp 2 framerelay 3 x25	.1.3.6.1.4.1.1027.4.8.1.4.2.1.8

This configuration table identifies the characteristics
of each potential transportation pipe to a remote
site.  Each entry in this table is associated with an
entry in the grLogWanTable via its mitelLogicalTblIndex.
Multiple entries can be associated with a single entry
in the mitelLogGrpLogicalWanTable.

mitelLogGrpLogicalWanPortEntry row .1.3.6.1.4.1.1027.4.8.1.4.3.1

Each entry of this table contains information about
a single WAN resource used by a logical interface to
a remote local area network. The instance of
mitelLogicalTblIndex used to index into this table is
the same instan…

Indexes

mitelLogicalTblIndex mitelLogWanPortTblIndex

Column	Syntax	OID
mitelLogWanPortTblIndex Identifies the port index associated with this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1027.4.8.1.4.3.1.1
mitelLogWanPortTblWanType Indicates whether or not this link is to be used as a permanent or ondemand link. Default is ondemand	Enumerationr/w Enumerated Values: 1 permanent 2 ondemand 3 incomming 4 outgoing	.1.3.6.1.4.1.1027.4.8.1.4.3.1.2
mitelLogWanPortTblTransType The transport type that this destination is over. Default is HDLC.	Enumerationr/w Enumerated Values: 1 hdlc 2 modem 3 ethernet	.1.3.6.1.4.1.1027.4.8.1.4.3.1.3
mitelLogWanPortTblRetry Determines the retry count for dial up WAN circuits. Default is 10.	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.1027.4.8.1.4.3.1.4
mitelLogWanPortTblRetryPeriod Determines the retry period in seconds for dial up WAN circuits. Default is 10 seconds.	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.1027.4.8.1.4.3.1.5
mitelLogWanPortTblPrepend Indicates in most cases an Ascii string that will be prepended to the destination address. Default is NULL.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.1027.4.8.1.4.3.1.6
mitelLogWanPortTblDestAddr Indicates the destination address that this interface will call (ie: phone number). Default is NULL.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.1027.4.8.1.4.3.1.7
mitelLogWanPortTblNextDestAddr Indicates the next destination address that this interface will call (ie: phone number). Default is NULL.	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.1027.4.8.1.4.3.1.8
mitelLogWanPortTblChId This object is a unique identifier for this network channel. e.g. DLCI for frame-relay. The value must be within the defined range or if not used the DEFAULT value should be 0.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1027.4.8.1.4.3.1.9
mitelLogWanPortTblDialback Enables/disables dialback option. If enabled the system will drop the link and then dial the user back using the configured dial string or a dial string reported from an authentication server. Default is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1027.4.8.1.4.3.1.10
mitelLogWanPortTblAdminStatus The current desired state of this sub-layer. Default is down.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.1027.4.8.1.4.3.1.11
mitelLogWanPortTblOperStatus The current active state of this sub-layer.	Enumeration Enumerated Values: 1 connecting 2 connected 3 disconnecting 4 disconnected 5 retryExhausted	.1.3.6.1.4.1.1027.4.8.1.4.3.1.12
mitelLogWanPortTblStatus The current status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1027.4.8.1.4.3.1.13