MITEL-IPLOGICAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
7

mitelIpLogGrpLogicalTable

table
.1.3.6.1.4.1.1027.4.8.1.1.5.1 · 1 row entry · 7 columns
Open in standard view
Uses the mitel variant from /opt/observium/mibs/mitel.
Command help
Walk mitelIpLogGrpLogicalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-IPLOGICAL-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-IPLOGICAL-MIB::mitelIpLogGrpLogicalTable' 
A table containing information about logical IP LAN
destinations.
mitelIpLogGrpLogicalEntry row .1.3.6.1.4.1.1027.4.8.1.1.5.1.1
Each entry of this table contains information about
a specific logical interface to a local area network.
Each logical LAN can support routing or bridging
functions, these are considered virtual interfaces.
Indexes
Column Syntax OID
mitelIpLogAdvertisementAddress
The IP destination address to be used for multicast
Router Advertisements sent from the interface. The
only permissible values are the all-systems multicast
address, 224.0.0.1, or the limited-broadcast address,
255.255…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.1
mitelIpLogMaxAdvertisementInterval
The maximum time allowed between sending multicast
Router Advertisements from the interface, in seconds.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.2
mitelIpLogMinAdvertisementInterval
The minimum time allowed between sending unsolicited
multicast Router Advertisements from the interface, in
seconds. Must be no greater than
grIpLMaxAdvertisementInterval.
Integer32r/w
Constraints:
range: 3-1800
 .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.3
mitelIpLogAdvertisementLifetime
The value to be placed in the Lifetime field of Router
Advertisements sent from the interface, in seconds.
Must be no less than grIpLMaxAdvertisementInterval.
Integer32r/w
Constraints:
range: 4-9000
 .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.4
mitelIpLogPerformRouterDiscovery
A flag indicating whether or not the host is to perform
ICMP router discovery on the interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.5
mitelIpLogSolicitationAddress
The IP destination address to be used for sending
Router Solicitations from the interface. The only
permissible values are the all-routers multicast
address, 224.0.0.2, or the limited-broadcast address,
255.255.255.255…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.6
mitelIpLogStatus
The current status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1027.4.8.1.1.5.1.1.7