MITEL-BCM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
7
mitelBCMPortTable
table
.1.3.6.1.4.1.1027.4.2.1.1.1
·
1 row entry
·
3 columns
Uses the mitel variant from
Command help
/opt/observium/mibs/mitel.
Walk mitelBCMPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-BCM-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-BCM-MIB::mitelBCMPortTable'
Table defining statistical information about each port of a Broadcom Switch sub-system.
A row defining a single BCM Port table entry.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The interface identifier for this switch port.
Usually corresponds to ifIndex in the ifTable. |
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.1027.4.2.1.1.1.1.1 |
|
The number of times the source address (SA)
of good received packets has changed. A count greater than one generally indicates the port is connected to a repeater based network. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1027.4.2.1.1.1.1.2 |
|
The last received source address on this port.
|
SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses. |
.1.3.6.1.4.1.1027.4.2.1.1.1.1.3 |
mitelBCMChipTable
table.1.3.6.1.4.1.1027.4.2.1.1.3
·
1 row entry
·
4 columns
Uses the mitel variant from
Command help
/opt/observium/mibs/mitel.
Walk mitelBCMChipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MITEL-BCM-MIB' -M '/opt/observium/mibs/mitel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MITEL-BCM-MIB::mitelBCMChipTable'
Table defining characteristic information about each Broadcom Switch chip in the system.
A row defining a single Broadcom (BCM) Chip
table entry.
table entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The identifier for this switch chip.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.1027.4.2.1.1.3.1.1 |
||||||||
|
The status of the BCM ethernet chip
built-in-self-test (BIST). BCRAM(0) bit 2^0 - Buffer control RAM (only in BCM5380M) IPDBM(1) bit 2^1 - Internal packet data buffer memory MRAM(2) bit 2^2 - MIB RAM (on… |
Bits Enumerated Values:
|
.1.3.6.1.4.1.1027.4.2.1.1.3.1.2 |
||||||||
|
The BCM ethernet chip revision ID.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1027.4.2.1.1.3.1.3 |
||||||||
|
The BCM ethernet chip type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1027.4.2.1.1.3.1.4 |