MIMOSA-NETWORKS-BFIVE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
20

mimosaChainTable

table
.1.3.6.1.4.1.43356.2.1.2.6.1 · 1 row entry · 7 columns
Open in standard view
Uses the mimosa variant from /opt/observium/mibs/mimosa.
Command help
Walk mimosaChainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MIMOSA-NETWORKS-BFIVE-MIB' -M '/opt/observium/mibs/mimosa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MIMOSA-NETWORKS-BFIVE-MIB::mimosaChainTable' 
A list of RF chain entries, which is part of MIMO tables. MIMO stands
for Multiple In Multiple Out.
mimosaChainEntry row .1.3.6.1.4.1.43356.2.1.2.6.1.1
An entry containing chain information applicable to a particular
RF chain.
Indexes
Column Syntax OID
mimosaChain
An index which is used to access a particular entry in the chain table.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.43356.2.1.2.6.1.1.1
mimosaTxPower
Specifies the transmit power of the given RF chain. A value of -8 means
this particular TxChain is not a valid entry.
dBmDecimalOne .1.3.6.1.4.1.43356.2.1.2.6.1.1.2
mimosaRxPower
Specifies the receive power of the given RF chain. A value of -100
means this particular RxChain is not a valid entry (SNR must be -100).
dBmDecimalOne .1.3.6.1.4.1.43356.2.1.2.6.1.1.3
mimosaRxNoise
Specifies the received noise level for the given RF chain.
dBmDecimalOne .1.3.6.1.4.1.43356.2.1.2.6.1.1.4
mimosaSNR
Indicates the Signal to Noise Ratio (SNR) for the given RF chain.
A value of -100 means this particular RxChain is not a valid entry.
dBDecimalOne .1.3.6.1.4.1.43356.2.1.2.6.1.1.5
mimosaCenterFreq
The center frequency for the given RF chain. A value of 0 means this
particular Chain is not a valid entry.
MHzSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.1.1.6
mimosaPolarization
The ploarization of the given RF chain. It could be horizontal or
vertical.
Enumeration
Enumerated Values:
1horizontal
2vertical
 .1.3.6.1.4.1.43356.2.1.2.6.1.1.7

mimosaStreamTable

table
.1.3.6.1.4.1.43356.2.1.2.6.2 · 1 row entry · 8 columns
Open in standard view
Uses the mimosa variant from /opt/observium/mibs/mimosa.
Command help
Walk mimosaStreamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MIMOSA-NETWORKS-BFIVE-MIB' -M '/opt/observium/mibs/mimosa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MIMOSA-NETWORKS-BFIVE-MIB::mimosaStreamTable' 
A list of data stream entries, which are part of MIMO tables. MIMO
stands for Multiple In Multiple Out.
mimosaStreamEntry row .1.3.6.1.4.1.43356.2.1.2.6.2.1
The entry containing information applicable to a particular stream.
Indexes
Column Syntax OID
mimosaStream
The index used to access a particular entry in the stream table.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.43356.2.1.2.6.2.1.1
mimosaTxPhy
Specifies the transmit rate of the given data stream.
MbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.2.1.2
mimosaTxMCS
Specifies the transmit MCS of the given data stream. A value of
-1 means this particular TxStream is not a valid entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.2.1.3
mimosaTxWidth
Specifies the channel width based on MCS. A value of
-1 means this particular TxWidth is not a valid entry
MHzSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.2.1.4
mimosaRxPhy
Specifies the receive rate of the given data stream.
MbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.2.1.5
mimosaRxMCS
Specifies the receive MCS of the given data stream. A value of
-1 means this particular RxStream is not a valid entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.2.1.6
mimosaRxWidth
Specifies the receive Rx Width of the given data stream. A value of
-1 means this particular RxWidth is not a valid entry.
MHzSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.2.1.7
mimosaRxEVM
Specifies the receive Error Vector Magnitude (EVM) of the given data
stream.
dBDecimalOne .1.3.6.1.4.1.43356.2.1.2.6.2.1.8

mimosaChannelTable

table
.1.3.6.1.4.1.43356.2.1.2.6.3 · 1 row entry · 5 columns
Open in standard view
Uses the mimosa variant from /opt/observium/mibs/mimosa.
Command help
Walk mimosaChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MIMOSA-NETWORKS-BFIVE-MIB' -M '/opt/observium/mibs/mimosa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MIMOSA-NETWORKS-BFIVE-MIB::mimosaChannelTable' 
A list of RF channel entries on the Mimosa device.
mimosaChannelEntry row .1.3.6.1.4.1.43356.2.1.2.6.3.1
The entry containing management information applicable to a particular
channel.
Indexes
Column Syntax OID
mimosaChannel
The index used to access a particular entry in the RF channel table.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.43356.2.1.2.6.3.1.1
mimosaChannelMode
Specifies the mode for the given channel. The transmit or receive
values indicate Frequency Diversity (FD) mode is in use. The
bidirectional value means that the channel is used for both transmit
and receive in all othe…
Enumeration
Enumerated Values:
1transmit
2receive
3bidirectional
 .1.3.6.1.4.1.43356.2.1.2.6.3.1.2
mimosaChannelWidth
Specifies the channel width of the given channel.
MHzSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.3.1.3
mimosaChannelTxPower
Specifies the transmit power level on the channel. If Channel Width
is set to 1xN MHz, Channel 2 is not be used. In Frequency Diversity mode,
Power 1 and Power 2 represent transmit power on the local and remote
sides, r…
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.3.1.4
mimosaChannelCenterFreq
Specifies the center frequency of the channel used on the link. In all
modes, the center frequency represents the absolute center of the
selected channel width without any offset, and the center can be moved
in 5 MHz in…
MHzSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43356.2.1.2.6.3.1.5