METRO1500-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
99

metro1500MainTrapsinkTable

table mandatory
.1.3.6.1.4.1.2544.1.3.1.1.10 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk metro1500MainTrapsinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'METRO1500-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'METRO1500-MIB::metro1500MainTrapsinkTable' 
Table of Trapsinks
metro1500MainTrapsinkEntry row .1.3.6.1.4.1.2544.1.3.1.1.10.1
Entries in the Trapsink Table
Indexes
Column Syntax OID
metro1500MainTrapsinkNumbermandatory
Number of Trapsink
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.2544.1.3.1.1.10.1.1
metro1500MainTrapsinkAddressmandatory
IP Address of the Management System which should receive SNMP
Traps. The Logfiles are also shown in this Table
RFC1213-MIBDisplayString .1.3.6.1.4.1.2544.1.3.1.1.10.1.2
metro1500MainTrapsinkCommunitymandatory
Community String which is sent with a SNMP Trap to the
Management Station
RFC1213-MIBDisplayString .1.3.6.1.4.1.2544.1.3.1.1.10.1.3
metro1500MainTrapsinkPrioritymandatory
Priority of the Trapsink (lower level gets less Traps)
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.2544.1.3.1.1.10.1.4

metro1500MainLogfileTable

table mandatory
.1.3.6.1.4.1.2544.1.3.1.1.11 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk metro1500MainLogfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'METRO1500-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'METRO1500-MIB::metro1500MainLogfileTable' 
Table of Log Files
metro1500MainLogfileEntry row .1.3.6.1.4.1.2544.1.3.1.1.11.1
Entries in the Logfile Table
Indexes
Column Syntax OID
metro1500MainLogfileNumbermandatory
Number of Logfile
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2544.1.3.1.1.11.1.1
metro1500MainLogfileNamemandatory
Name of Logfile
RFC1213-MIBDisplayString .1.3.6.1.4.1.2544.1.3.1.1.11.1.2
metro1500MainLogfileSizemandatory
Size of Logfile
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.3.1.1.11.1.3
metro1500MainLogfilePrioritymandatory
Priority of Logfile
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.2544.1.3.1.1.11.1.4

metro1500SlotTable

table mandatory
.1.3.6.1.4.1.2544.1.3.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk metro1500SlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'METRO1500-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'METRO1500-MIB::metro1500SlotTable' 
Table of installed METRO1500 Components. Since METRO1500 can
handle many different Components, in this Section only the
common Information is displayed.  Component specific
Information is stored in different Subtrees.
metro1500SlotEntry row .1.3.6.1.4.1.2544.1.3.1.2.1
Installed METRO1500 Components
Indexes
Column Syntax OID
metro1500SlotNumbermandatory
Slot Number of installed Component. The Device
Master has always Slot Number 0 and is shown in the
Main section.
Integer32
Constraints:
range: 1-79
 .1.3.6.1.4.1.2544.1.3.1.2.1.1
metro1500Typemandatory
Type of installed Component
RFC1213-MIBDisplayString .1.3.6.1.4.1.2544.1.3.1.2.1.2
metro1500SlotTypeNumbermandatory
Integer Number between 0 and 255 unique for a
specific type of installed Component. This
Number can be used for management Systems to
handle automatically the different Options
of installed Components.
Enumeration
Enumerated Values:
1metro1500Converter
2metro1000Converter
3metro1000EthernetConverter
5metro1500-2-5GbConverter
7metro1500-TRL-Converter
10metro1500-4PortTDMCard
32nemi
33demi
39metro1500-EthernetHubCard
64switch
255other
 .1.3.6.1.4.1.2544.1.3.1.2.1.3
metro1500SerialNumbermandatory
Serial Number of installed Component
RFC1213-MIBDisplayString .1.3.6.1.4.1.2544.1.3.1.2.1.4
metro1500HardwareVersionmandatory
Hardware Version of installed Component
RFC1213-MIBDisplayString .1.3.6.1.4.1.2544.1.3.1.2.1.5
metro1500SoftwareVersionmandatory
SoftwareVersion of installed Component
RFC1213-MIBDisplayString .1.3.6.1.4.1.2544.1.3.1.2.1.6
metro1500Temperaturemandatory
Temperature of installed Component in
Celsius
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.3.1.2.1.7
metro1500BoardVoltagemandatory
Voltage measured directly on the board in mV
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.3.1.2.1.8
metro1500DetailInfomandatory
A Reference to the MIB Definition where the special
Options of the Component are described with more Details
ObjectIdentifier .1.3.6.1.4.1.2544.1.3.1.2.1.9
metro1500EPLDVersionmandatory
Software Version on the programmable Logic Circuit
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2544.1.3.1.2.1.10

metro1500PSTable

table mandatory
.1.3.6.1.4.1.2544.1.3.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk metro1500PSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'METRO1500-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'METRO1500-MIB::metro1500PSTable' 
Table of installed Power Supplies
metro1500PSEntry row .1.3.6.1.4.1.2544.1.3.1.3.1
Installed METRO1500 Power Supplies
Indexes
Column Syntax OID
metro1500PSNumbermandatory
Number of installed Power Supply
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2544.1.3.1.3.1.1
metro1500PSOnmandatory
Is installed Power Supply On or Off
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.1.3.1.2

metro1500FanTable

table mandatory
.1.3.6.1.4.1.2544.1.3.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk metro1500FanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'METRO1500-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'METRO1500-MIB::metro1500FanTable' 
Table of installed Fans
metro1500FanEntry row .1.3.6.1.4.1.2544.1.3.1.4.1
Installed METRO1500 Fans
Indexes
Column Syntax OID
metro1500FanNumbermandatory
Number of installed Fan
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.2544.1.3.1.4.1.1
metro1500FanOnmandatory
Is installed Fan On or Off
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.1.4.1.2

metro1500ConverterTable

table mandatory
.1.3.6.1.4.1.2544.1.3.5.1 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk metro1500ConverterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'METRO1500-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'METRO1500-MIB::metro1500ConverterTable' 
Table of installed METRO1500 Converters
metro1500ConverterEntry row .1.3.6.1.4.1.2544.1.3.5.1.1
Installed METRO1500 Converters
Indexes
Column Syntax OID
metro1500ConverterNumbermandatory
Slot Number of installed Converter Card
Integer32
Constraints:
range: 1-79
 .1.3.6.1.4.1.2544.1.3.5.1.1.1
metro1500RxLocmandatory
Local Receiver has Signal (On) or Loss
of Signal (Off)
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.5.1.1.2
metro1500TxLocmandatory
Local Transmitter is On or Off
Enumeration
Enumerated Values:
1on
2off
3alwaysOn
4alwaysOff
 .1.3.6.1.4.1.2544.1.3.5.1.1.3
metro1500TxLocCmandatory
Current of the local Transmitter in mA.
This Entry is only available if a Current Sensor is
installed
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.2544.1.3.5.1.1.4
metro1500TxLocTempmandatory
Temperature of the local Transmitter in Celsius.
This Entry is only available if the Laser is cooled
Integer32
Constraints:
range: -50-100
 .1.3.6.1.4.1.2544.1.3.5.1.1.5
metro1500RxRemmandatory
Remote Receiver has Signal (On) or Loss
of Signal (Off)
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.5.1.1.6
metro1500TxRemmandatory
Remote Transmitter is On or Off
Enumeration
Enumerated Values:
1on
2off
3alwaysOn
4alwaysOff
 .1.3.6.1.4.1.2544.1.3.5.1.1.7
metro1500TxRemCmandatory
Current of the Remote Transmitter in Milli Ampere.
This Entry is only available if a Current Sensor is
installed
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.2544.1.3.5.1.1.8
metro1500TxRemTempmandatory
Temperature of the Remote Transmitter in Celsius
This Entry is only available if the Laser is cooled
Integer32
Constraints:
range: -50-100
 .1.3.6.1.4.1.2544.1.3.5.1.1.9
metro1500RxRem2mandatory
2nd Remote receiver has Signal (On) or Loss
of Signal (Off).
(Only available if a 2nd Remote Receiver is
installed)
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.5.1.1.10
metro1500ClockStatemandatory
Status of the Clock. This Entry is only available
if a Clock is installed. If the Clock is enabled,
and has an error output, and cannot synchronize to
the Signal, the Clock fails.
Enumeration
Enumerated Values:
1on
2off
3fail
 .1.3.6.1.4.1.2544.1.3.5.1.1.11
metro1500ClockFreqmandatory
Frequency of the Clock in MBit/s. Only available if
a Clock is installed.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.3.5.1.1.12
metro1500LocLoopmandatory
Local Loop is set to On or to Off
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.5.1.1.13
metro1500RemLoopmandatory
Remote Loop is set to On or to Off
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.5.1.1.14
metro1500ClockTypemandatory
Type of the Clock. Only available, if a Clock is installed.
Enumeration
Enumerated Values:
1multiClockLSModule
2multiClockLS
3multiClockFCGbE
5multiClockOCxGbE
7multiClockOCxFC
9multiClockOCxGbEFC
11multiClockFCGbEOnBoard
21fixedClock125MbpsModule
22fixedClock125Mbps
31fixedClock155MbpsModule
32fixedClock155Mbps
41fixedClock200MbpsModule
42fixedClock200Mbps
51fixedClock266MbpsModule
52fixedClock266Mbps
61fixedClock622MbpsModule
62fixedClock622Mbps
71fixedClock1062MbpsModule
72fixedClock1062Mbps
75fixedClock1250MbpsModule
76fixedClock1250Mbps
81fixedClock2500MbpsModule
82fixedClock2500Mbps
255other
 .1.3.6.1.4.1.2544.1.3.5.1.1.15

metro1500SwitchTable

table mandatory
.1.3.6.1.4.1.2544.1.3.10.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk metro1500SwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'METRO1500-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'METRO1500-MIB::metro1500SwitchTable' 
Table of installed METRO1500 Switches
metro1500SwitchEntry row .1.3.6.1.4.1.2544.1.3.10.1.1
Installed METRO1500 Switches
Indexes
Column Syntax OID
metro1500SwitchNumbermandatory
Slot Number of installed Remote Optical Switch Card
Integer32
Constraints:
range: 1-79
 .1.3.6.1.4.1.2544.1.3.10.1.1.1
metro1500SwitchLinemandatory
Active Line of Remote Optical Switch
Enumeration
Enumerated Values:
1lineA
2lineB
 .1.3.6.1.4.1.2544.1.3.10.1.1.2
metro1500SwitchModemandatory
Mode of Transmit Line of Remote Optical Switch
Enumeration
Enumerated Values:
1automatic
2locked
 .1.3.6.1.4.1.2544.1.3.10.1.1.3
metro1500SwitchLaserOnmandatory
Shows if the reference Laser is On or Off
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.10.1.1.4
metro1500SwitchLineAavailmandatory
Is Line A of Remote Optical Switch available?
Enumeration
Enumerated Values:
1available
2notAvailable
 .1.3.6.1.4.1.2544.1.3.10.1.1.5
metro1500SwitchLineBavailmandatory
Is Line B of Remote Optical Switch available
Enumeration
Enumerated Values:
1available
2notAvailable
 .1.3.6.1.4.1.2544.1.3.10.1.1.6

metro1500EthernetHubTable

table mandatory
.1.3.6.1.4.1.2544.1.3.14.1 · 1 row entry · 21 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk metro1500EthernetHubTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'METRO1500-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'METRO1500-MIB::metro1500EthernetHubTable' 
Table of installed FSP-II Hub Cards
metro1500EthernetHubEntry row .1.3.6.1.4.1.2544.1.3.14.1.1
Installed FSP-II Hub Cards
Indexes
Column Syntax OID
metro1500EthernetHubNumbermandatory
Slot Number of installed Hub Card
Integer32
Constraints:
range: 1-79
 .1.3.6.1.4.1.2544.1.3.14.1.1.1
metro1500EthernetHubPortEnable1mandatory
is Hub Port 1 enabled ?
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2544.1.3.14.1.1.10
metro1500EthernetHubPortPartitionStatus1mandatory
is Port 1 partitioned ?
Enumeration
Enumerated Values:
1partitioned
2notPartitioned
 .1.3.6.1.4.1.2544.1.3.14.1.1.11
metro1500EthernetHubPortLinkStatus1mandatory
does Port 1 receive Link Pulses ?
Enumeration
Enumerated Values:
1linked
2notLinked
 .1.3.6.1.4.1.2544.1.3.14.1.1.12
metro1500EthernetHubPortPolarity1mandatory
polarity of input signal at Port 1
Enumeration
Enumerated Values:
1positive
2negative
 .1.3.6.1.4.1.2544.1.3.14.1.1.13
metro1500EthernetHubPortEnable2mandatory
is Hub Port 2 enabled ?
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2544.1.3.14.1.1.20
metro1500EthernetHubPortPartitionStatus2mandatory
is Port 2 partitioned ?
Enumeration
Enumerated Values:
1partitioned
2notPartitioned
 .1.3.6.1.4.1.2544.1.3.14.1.1.21
metro1500EthernetHubPortLinkStatus2mandatory
does Port 2 receive Link Pulses ?
Enumeration
Enumerated Values:
1linked
2notLinked
 .1.3.6.1.4.1.2544.1.3.14.1.1.22
metro1500EthernetHubPortPolarity2mandatory
polarity of input signal at Port 2
Enumeration
Enumerated Values:
1positive
2negative
 .1.3.6.1.4.1.2544.1.3.14.1.1.23
metro1500EthernetHubPortEnable3mandatory
is Hub Port 3 enabled ?
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2544.1.3.14.1.1.30
metro1500EthernetHubPortPartitionStatus3mandatory
is Port 3 partitioned ?
Enumeration
Enumerated Values:
1partitioned
2notPartitioned
 .1.3.6.1.4.1.2544.1.3.14.1.1.31
metro1500EthernetHubPortLinkStatus3mandatory
does Port 3 receive Link Pulses ?
Enumeration
Enumerated Values:
1linked
2notLinked
 .1.3.6.1.4.1.2544.1.3.14.1.1.32
metro1500EthernetHubPortPolarity3mandatory
polarity of input signal at Port 3
Enumeration
Enumerated Values:
1positive
2negative
 .1.3.6.1.4.1.2544.1.3.14.1.1.33
metro1500EthernetHubPortEnable4mandatory
is Hub Port 4 enabled ?
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2544.1.3.14.1.1.40
metro1500EthernetHubPortPartitionStatus4mandatory
is Port 4 partitioned ?
Enumeration
Enumerated Values:
1partitioned
2notPartitioned
 .1.3.6.1.4.1.2544.1.3.14.1.1.41
metro1500EthernetHubPortLinkStatus4mandatory
does Port 4 receive Link Pulses ?
Enumeration
Enumerated Values:
1linked
2notLinked
 .1.3.6.1.4.1.2544.1.3.14.1.1.42
metro1500EthernetHubPortPolarity4mandatory
polarity of input signal at Port 4
Enumeration
Enumerated Values:
1positive
2negative
 .1.3.6.1.4.1.2544.1.3.14.1.1.43
metro1500EthernetHubPortEnable5mandatory
is Hub Port 5 enabled ?
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2544.1.3.14.1.1.50
metro1500EthernetHubPortPartitionStatus5mandatory
is Port 5 partitioned ?
Enumeration
Enumerated Values:
1partitioned
2notPartitioned
 .1.3.6.1.4.1.2544.1.3.14.1.1.51
metro1500EthernetHubPortLinkStatus5mandatory
does Port 5 receive Link Pulses ?
Enumeration
Enumerated Values:
1linked
2notLinked
 .1.3.6.1.4.1.2544.1.3.14.1.1.52
metro1500EthernetHubPortPolarity5mandatory
polarity of input signal at Port 5
Enumeration
Enumerated Values:
1positive
2negative
 .1.3.6.1.4.1.2544.1.3.14.1.1.53

metro1500TDMTable

table mandatory
.1.3.6.1.4.1.2544.1.3.15.1 · 1 row entry · 35 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk metro1500TDMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'METRO1500-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'METRO1500-MIB::metro1500TDMTable' 
Table of installed FSP-II TDM Cards
metro1500TDMEntry row .1.3.6.1.4.1.2544.1.3.15.1.1
Installed FSP-II TDM Cards
Indexes
Column Syntax OID
metro1500TDMNumbermandatory
Slot Number of installed TDM Card
Integer32
Constraints:
range: 1-79
 .1.3.6.1.4.1.2544.1.3.15.1.1.1
metro1500TDMRxRemmandatory
Does the remote receiver receive Light (on) or not
(off)?
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.15.1.1.4
metro1500TDMRxSyncmandatory
Is the input signal synchronized with the corresponding
TDM card?
Enumeration
Enumerated Values:
1sync
2noSync
 .1.3.6.1.4.1.2544.1.3.15.1.1.5
metro1500TDMTxRemmandatory
State of the Remote Transmitter
Enumeration
Enumerated Values:
1on
2off
3alwaysOn
4alwaysOff
 .1.3.6.1.4.1.2544.1.3.15.1.1.6
metro1500TDMTxRemCmandatory
Current of the remote Transmitter in mA
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.2544.1.3.15.1.1.7
metro1500TDMTxRemTempmandatory
Temperature of the remote Transmitter in Celsius
Integer32
Constraints:
range: -50-100
 .1.3.6.1.4.1.2544.1.3.15.1.1.8
metro1500TDMLocLoopmandatory
Loop for all Local Inputs enabled (on) or disabled (off)
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.15.1.1.9
metro1500TDMLocModuleInst1mandatory
is local Module 1 installed ?
Enumeration
Enumerated Values:
1installed
2notInstalled
 .1.3.6.1.4.1.2544.1.3.15.1.1.20
metro1500TDMLocModuleEnable1mandatory
is local Module 1 enabled ?
Enumeration
Enumerated Values:
1enabled
2notEnabled
 .1.3.6.1.4.1.2544.1.3.15.1.1.21
metro1500TDMLocModuleRx1mandatory
local receiver 1 gets signal (on)
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.15.1.1.22
metro1500TDMLocModuleTx1mandatory
state of the local transmitter
Enumeration
Enumerated Values:
1on
2off
3alwaysOn
4alwaysOff
 .1.3.6.1.4.1.2544.1.3.15.1.1.23
metro1500TDMLocModuleRemoteData1mandatory
receiving data for this module from the remote side
Enumeration
Enumerated Values:
1data
2noData
 .1.3.6.1.4.1.2544.1.3.15.1.1.24
metro1500TDMLocModuleClockFrequency1mandatory
data rate of the clock installed on local Module 1
in MBit/s
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.3.15.1.1.25
metro1500TDMLocModuleClockError1mandatory
data rate and clock frequency are not synchronized
Enumeration
Enumerated Values:
1error
2noError
 .1.3.6.1.4.1.2544.1.3.15.1.1.26
metro1500TDMLocModuleInst2mandatory
is local Module 2 installed ?
Enumeration
Enumerated Values:
1installed
2notInstalled
 .1.3.6.1.4.1.2544.1.3.15.1.1.30
metro1500TDMLocModuleEnable2mandatory
is local Module 2 enabled ?
Enumeration
Enumerated Values:
1enabled
2notEnabled
 .1.3.6.1.4.1.2544.1.3.15.1.1.31
metro1500TDMLocModuleRx2mandatory
local receiver 2 gets signal (on)
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.15.1.1.32
metro1500TDMLocModuleTx2mandatory
state of the local transmitter
Enumeration
Enumerated Values:
1on
2off
3alwaysOn
4alwaysOff
 .1.3.6.1.4.1.2544.1.3.15.1.1.33
metro1500TDMLocModuleRemoteData2mandatory
receiving data for this module from the remote side
Enumeration
Enumerated Values:
1data
2noData
 .1.3.6.1.4.1.2544.1.3.15.1.1.34
metro1500TDMLocModuleClockFrequency2mandatory
data rate of the clock installed on local Module 2
in MBit/s
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.3.15.1.1.35
metro1500TDMLocModuleClockError2mandatory
data rate and clock frequency are not synchronized
Enumeration
Enumerated Values:
1error
2noError
 .1.3.6.1.4.1.2544.1.3.15.1.1.36
metro1500TDMLocModuleInst3mandatory
is local Module 3 installed ?
Enumeration
Enumerated Values:
1installed
2notInstalled
 .1.3.6.1.4.1.2544.1.3.15.1.1.40
metro1500TDMLocModuleEnable3mandatory
is local Module 3 enabled ?
Enumeration
Enumerated Values:
1enabled
2notEnabled
 .1.3.6.1.4.1.2544.1.3.15.1.1.41
metro1500TDMLocModuleRx3mandatory
local receiver 3 gets signal (on)
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.15.1.1.42
metro1500TDMLocModuleTx3mandatory
state of the local transmitter
Enumeration
Enumerated Values:
1on
2off
3alwaysOn
4alwaysOff
 .1.3.6.1.4.1.2544.1.3.15.1.1.43
metro1500TDMLocModuleRemoteData3mandatory
receiving data for this module from the remote side
Enumeration
Enumerated Values:
1data
2noData
 .1.3.6.1.4.1.2544.1.3.15.1.1.44
metro1500TDMLocModuleClockFrequency3mandatory
data rate of the clock installed on local Module 3
in MBit/s
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.3.15.1.1.45
metro1500TDMLocModuleClockError3mandatory
data rate and clock frequency are not synchronized
Enumeration
Enumerated Values:
1error
2noError
 .1.3.6.1.4.1.2544.1.3.15.1.1.46
metro1500TDMLocModuleInst4mandatory
is local Module 4 installed ?
Enumeration
Enumerated Values:
1installed
2notInstalled
 .1.3.6.1.4.1.2544.1.3.15.1.1.50
metro1500TDMLocModuleEnable4mandatory
is local Module 4 enabled ?
Enumeration
Enumerated Values:
1enabled
2notEnabled
 .1.3.6.1.4.1.2544.1.3.15.1.1.51
metro1500TDMLocModuleRx4mandatory
local receiver 4 gets signal (on)
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2544.1.3.15.1.1.52
metro1500TDMLocModuleTx4mandatory
state of the local transmitter
Enumeration
Enumerated Values:
1on
2off
3alwaysOn
4alwaysOff
 .1.3.6.1.4.1.2544.1.3.15.1.1.53
metro1500TDMLocModuleRemoteData4mandatory
receiving data for this module from the remote side
Enumeration
Enumerated Values:
1data
2noData
 .1.3.6.1.4.1.2544.1.3.15.1.1.54
metro1500TDMLocModuleClockFrequency4mandatory
data rate of the clock installed on local Module 4
in MBit/s
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.3.15.1.1.55
metro1500TDMLocModuleClockError4mandatory
data rate and clock frequency are not synchronized
Enumeration
Enumerated Values:
1error
2noError
 .1.3.6.1.4.1.2544.1.3.15.1.1.56