Trap is sent when a new Module is inserted
into the FSP-I Box
metro1500TDMLocModuleData1
.1.3.6.1.4.1.2544.1.3.100.0.104
Trap is sent, when data from the remote side is available for
this TDM channel
metro1500TDMLocModuleNoData1
.1.3.6.1.4.1.2544.1.3.100.0.105
Trap is sent, when no data from the remote side is available for
this TDM channel
metro1500TDMLocModuleData2
.1.3.6.1.4.1.2544.1.3.100.0.106
Trap is sent, when data from the remote side is available for
this TDM channel
metro1500TDMLocModuleNoData2
.1.3.6.1.4.1.2544.1.3.100.0.107
Trap is sent, when no data from the remote side is available for
this TDM channel
metro1500TDMLocModuleData3
.1.3.6.1.4.1.2544.1.3.100.0.108
Trap is sent, when data from the remote side is available for
this TDM channel
metro1500TDMLocModuleNoData3
.1.3.6.1.4.1.2544.1.3.100.0.109
Trap is sent, when no data from the remote side is available for
this TDM channel
metro1500TDMLocModuleData4
.1.3.6.1.4.1.2544.1.3.100.0.110
Trap is sent, when data from the remote side is available for
this TDM channel
metro1500TDMLocModuleNoData4
.1.3.6.1.4.1.2544.1.3.100.0.111
Trap is sent, when no data from the remote side is available for
this TDM channel
metro1500TDMLocModuleClockFail1
.1.3.6.1.4.1.2544.1.3.100.0.120
Trap is sent, when the Data Rate of the local input signal doesn't
match the Data Rate of the local clock
metro1500TDMLocModuleClockNoFail1
.1.3.6.1.4.1.2544.1.3.100.0.121
Trap is sent, when the Data Rate of the local input signal matches
the Data Rate of the local clock
metro1500TDMLocModuleClockFail2
.1.3.6.1.4.1.2544.1.3.100.0.122
Trap is sent, when the Data Rate of the local input signal doesn't
match the Data Rate of the local clock
metro1500TDMLocModuleClockNoFail2
.1.3.6.1.4.1.2544.1.3.100.0.123
Trap is sent, when the Data Rate of the local input signal matches
the Data Rate of the local clock
metro1500TDMLocModuleClockFail3
.1.3.6.1.4.1.2544.1.3.100.0.124
Trap is sent, when the Data Rate of the local input signal doesn't
match the Data Rate of the local clock
metro1500TDMLocModuleClockNoFail3
.1.3.6.1.4.1.2544.1.3.100.0.125
Trap is sent, when the Data Rate of the local input signal matches
the Data Rate of the local clock
metro1500TDMLocModuleClockFail4
.1.3.6.1.4.1.2544.1.3.100.0.126
Trap is sent, when the Data Rate of the local input signal doesn't
match the Data Rate of the local clock
metro1500TDMLocModuleClockNoFail4
.1.3.6.1.4.1.2544.1.3.100.0.127
Trap is sent, when the Data Rate of the local input signal matches
the Data Rate of the local clock
metro1500HardwareDeleted
.1.3.6.1.4.1.2544.1.3.100.0.2
Trap is sent when a Module is removed
from the FSP-I Box
metro1500RxLocOn
.1.3.6.1.4.1.2544.1.3.100.0.20
Trap is sent when the local Receiver gets Signal
metro1500RxLocOff
.1.3.6.1.4.1.2544.1.3.100.0.21
Trap is sent when the local Receiver has Loss of Signal
metro1500TxLocOn
.1.3.6.1.4.1.2544.1.3.100.0.22
Trap is sent when the local Transmitter is switched on,
Either this trap or Trap #20 should be disabled in the
Configuration because they are typically sent at the same Time.
metro1500TxLocOff
.1.3.6.1.4.1.2544.1.3.100.0.23
Trap is sent when the local Transmitter is switched off,
Either this trap or Trap #21 should be disabled in the
Configuration because they are typically sent at the same Time.
metro1500RxRemOn
.1.3.6.1.4.1.2544.1.3.100.0.24
Trap is sent when the remote Receiver gets Signal
metro1500RxRemOff
.1.3.6.1.4.1.2544.1.3.100.0.25
Trap is sent when the remote Receiver has Loss of Signal
metro1500TxRemOn
.1.3.6.1.4.1.2544.1.3.100.0.26
Trap is sent when the remote Transmitter is switched on,
Either this trap or Trap #24 should be disabled in the
Configuration because they are typically sent at the same Time.
metro1500TxRemOff
.1.3.6.1.4.1.2544.1.3.100.0.27
Trap is sent when the remote Transmitter is switched off,
Either this trap or Trap #25 should be disabled in the
Configuration because they are typically sent at the same Time.
metro1500RxRem2On
.1.3.6.1.4.1.2544.1.3.100.0.28
Trap is sent when the 2nd remote Receiver gets Signal.
This Trap is only sent if there is a 2nd remote Receiver.
metro1500RxRem2Off
.1.3.6.1.4.1.2544.1.3.100.0.29
Trap is sent when the 2nd remote Receiver has Loss of Signal.
This Trap is only sent if there is a 2nd remote Receiver.
metro1500PSNotFail
.1.3.6.1.4.1.2544.1.3.100.0.3
Trap is sent when a Power Supply
starts working
metro1500TxRem2On
.1.3.6.1.4.1.2544.1.3.100.0.30
Trap is sent when the 2nd remote Transmitter is switched on,
Either this Trap or Trap #28 should be disabled in the
Configuration because they are typically sent at the same Time.
This Trap is only sent if there is a 2nd remote Receiver.
metro1500TxRem2Off
.1.3.6.1.4.1.2544.1.3.100.0.31
Trap is sent when the 2nd remote Transmitter is switched off,
Either this trap or Trap #29 should be disabled in the
Configuration because they are typically sent at the same Time.
metro1500ClockNoFail
.1.3.6.1.4.1.2544.1.3.100.0.32
Trap is sent if a Clock is installed and can
synchronize with the input Signal. This Trap is not sent
if the installed Clock does not have an error Output
metro1500ClockFail
.1.3.6.1.4.1.2544.1.3.100.0.33
Trap is sent if a Clock is installed and can not
synchronize with the input Signal. This trap is not sent
if the installed Clock does not have an error Output
metro1500ClockChangeFrequency
.1.3.6.1.4.1.2544.1.3.100.0.34
Trap is sent if a multi frequency Clock is installed and
changes its frequency.
metro1500LocLoopOn
.1.3.6.1.4.1.2544.1.3.100.0.35
Trap is sent if Local Loop is set to On.
metro1500LocLoopOff
.1.3.6.1.4.1.2544.1.3.100.0.36
Trap is sent if Local Loop is set to Off.
metro1500RemLoopOn
.1.3.6.1.4.1.2544.1.3.100.0.37
Trap is sent if Remote Loop is set to On.
metro1500RemLoopOff
.1.3.6.1.4.1.2544.1.3.100.0.38
Trap is sent if Remote Loop is set to Off.
metro1500PSFail
.1.3.6.1.4.1.2544.1.3.100.0.4
Trap is sent when a Power Supply fails
metro1500switchReferenceLaserOn
.1.3.6.1.4.1.2544.1.3.100.0.40
Trap is sent when the Reference Laser is switched on
metro1500switchReferenceLaserOff
.1.3.6.1.4.1.2544.1.3.100.0.41
Trap is sent when the Reference Laser is switched off
metro1500switchToA
.1.3.6.1.4.1.2544.1.3.100.0.42
Trap is sent when the Switch switches to Line A
metro1500switchToB
.1.3.6.1.4.1.2544.1.3.100.0.43
Trap is sent when the Switch switches to Line B
metro1500switchAutomatic
.1.3.6.1.4.1.2544.1.3.100.0.44
Trap is sent when the Switch is going to Automatic State
metro1500switchLocked
.1.3.6.1.4.1.2544.1.3.100.0.45
Trap is sent when the Switch is going to Locked State
metro1500switchLineAavail
.1.3.6.1.4.1.2544.1.3.100.0.46
Trap is sent when the Switch Line A is available
metro1500switchLineANotAvail
.1.3.6.1.4.1.2544.1.3.100.0.47
Trap is sent when the Switch Line A is not available
metro1500switchLineBavail
.1.3.6.1.4.1.2544.1.3.100.0.48
Trap is sent when the Switch Line B is available
metro1500switchLineBNotAvail
.1.3.6.1.4.1.2544.1.3.100.0.49
Trap is sent when the Switch Line B is not available
metro1500FanNotFail
.1.3.6.1.4.1.2544.1.3.100.0.5
Trap is sent when a Fan starts working
metro1500repeatedMessage
.1.3.6.1.4.1.2544.1.3.100.0.50
Trap is sent, after three times the same trap is sent (instead of
the fourth one). The original trap is suppressed for one minute.
metro1500INNCDown
.1.3.6.1.4.1.2544.1.3.100.0.51
Trap is sent, when the Inter NEMI Network Connection (INNC) is down.
metro1500INNCUp
.1.3.6.1.4.1.2544.1.3.100.0.52
Trap is sent, when the Inter NEMI Network Connection (INNC) is up.
metro1500FanFail
.1.3.6.1.4.1.2544.1.3.100.0.6
Trap is sent when a Fan fails
metro1500EthernetHubPortEnable
.1.3.6.1.4.1.2544.1.3.100.0.60
Trap is sent, when one of the ports of the Ethernet Hub is
enabled by the management software (default). Use SNMP Get
to get the Port Number.
metro1500EthernetHubPortDisable
.1.3.6.1.4.1.2544.1.3.100.0.61
Trap is sent, when one of the ports of the Ethernet Hub is
disabled by the management Software. Use SNMP Get to get
the Port number.
metro1500EthernetHubPortPartitioned
.1.3.6.1.4.1.2544.1.3.100.0.62
Trap is sent, when a Hub Port is disabled by the Hub Hardware.
Use SNMP Get to get the Port Number.
metro1500EthernetHubPortNotPartitioned
.1.3.6.1.4.1.2544.1.3.100.0.63
Trap is sent, when a Hub Port is enabled by the Hub Hardware
(default). Use SNMP Get to get the Port Number.
metro1500EthernetHubPortLinkPulses
.1.3.6.1.4.1.2544.1.3.100.0.64
Trap is sent, when a Hub Port starts receiving Link Pulses.
Use SNMP Get to get the Port Number
metro1500EthernetHubPortNoLinkPulses
.1.3.6.1.4.1.2544.1.3.100.0.65
Trap is sent, when a Hub Port stops receiving Link Pulses.
Use SNMP Get to get the Port Number
metro1500BusNotFail
.1.3.6.1.4.1.2544.1.3.100.0.7
Trap is sent when the internal Bus starts
working again
metro1500TDMRemoteSyncLoss
.1.3.6.1.4.1.2544.1.3.100.0.70
Trap is sent, when the synchronisation of the incoming
remote data stream is lost
metro1500TDMRemoteSync
.1.3.6.1.4.1.2544.1.3.100.0.71
Trap is sent, when the synchronisation of the incoming
remote data stream is established
metro1500TDMLocModuleEnabled1
.1.3.6.1.4.1.2544.1.3.100.0.72
Trap is sent, when local module 1 is enabled by software
metro1500TDMLocModuleDisable1
.1.3.6.1.4.1.2544.1.3.100.0.73
Trap is sent, when local module 1 is disabled by software
metro1500TDMLocModuleEnabled2
.1.3.6.1.4.1.2544.1.3.100.0.74
Trap is sent, when local module 2 is enabled by software
metro1500TDMLocModuleDisable2
.1.3.6.1.4.1.2544.1.3.100.0.75
Trap is sent, when local module 2 is disabled by software
metro1500TDMLocModuleEnabled3
.1.3.6.1.4.1.2544.1.3.100.0.76
Trap is sent, when local module 3 is enabled by software
metro1500TDMLocModuleDisable3
.1.3.6.1.4.1.2544.1.3.100.0.77
Trap is sent, when local module 3 is disabled by software
metro1500TDMLocModuleEnabled4
.1.3.6.1.4.1.2544.1.3.100.0.78
Trap is sent, when local module 4 is enabled by software
metro1500TDMLocModuleDisable4
.1.3.6.1.4.1.2544.1.3.100.0.79
Trap is sent, when local module 4 is disabled by software
metro1500BusFail
.1.3.6.1.4.1.2544.1.3.100.0.8
Trap is sent when an internal Bus Failure occurs
metro1500TDMLocModuleRxOn1
.1.3.6.1.4.1.2544.1.3.100.0.88
Trap is sent, when the local receiver 1 of a TDM card gets
modulated signal
metro1500TDMLocModuleRxOff1
.1.3.6.1.4.1.2544.1.3.100.0.89
Trap is sent, when the local receiver 1 of a TDM card doesn't
get modulated signal
metro1500TDMLocModuleRxOn2
.1.3.6.1.4.1.2544.1.3.100.0.90
Trap is sent, when the local receiver 2 of a TDM card gets
modulated signal
metro1500TDMLocModuleRxOff2
.1.3.6.1.4.1.2544.1.3.100.0.91
Trap is sent, when the local receiver 2 of a TDM card doesn't
get modulated signal
metro1500TDMLocModuleRxOn3
.1.3.6.1.4.1.2544.1.3.100.0.92
Trap is sent, when the local receiver 3 of a TDM card gets
modulated signal
metro1500TDMLocModuleRxOff3
.1.3.6.1.4.1.2544.1.3.100.0.93
Trap is sent, when the local receiver 3 of a TDM card doesn't
get modulated signal
metro1500TDMLocModuleRxOn4
.1.3.6.1.4.1.2544.1.3.100.0.94
Trap is sent, when the local receiver 4 of a TDM card gets
modulated signal
metro1500TDMLocModuleRxOff4
.1.3.6.1.4.1.2544.1.3.100.0.95
Trap is sent, when the local receiver 4 of a TDM card doesn't
get modulated signal
org 
metro1500Manufacturer 
metro1500MainTrapsinkTable 
metro1500MainTrapsinkEntry 
metro1500MainTrapsinkNumber 
metro1500HardwareAdded