ME1200-MEP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
38
Rows
38
Columns
276

me1200ConfigInstanceTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.1.1 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigInstanceTable' 
This is a table of created instance configuration parameters
me1200ConfigInstanceEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1
This is a created instance configuration parameters. Not all parameters
can be changed
Indexes
Column Syntax OID
me1200ConfigInstanceId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.1
me1200ConfigInstanceMode
The instance mode. Cannot be changed after creation.
ME1200InstanceModer/w
Type Values:
0mep
1mip
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.2
me1200ConfigInstanceDirection
The instance direction. Cannot be changed after creation.
ME1200-TCME1200MepInstanceDirectionr/w
Type Values:
0down
1up
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.3
me1200ConfigInstanceDomain
The instance domain. Cannot be changed after creation.
ME1200InstanceDomainr/w
Type Values:
0port
1evc
2vlan
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.4
me1200ConfigInstanceFlow
The flow instance (VLAN - EVC). Cannot be changed after creation.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.5
me1200ConfigInstancePort
The instance residence port. Cannot be changed after creation.
ME1200-TCME1200InterfaceIndexr/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.6
me1200ConfigInstanceLevel
The instance level
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.7
me1200ConfigInstanceVid
Value that is not zero will add a tag with this value as VID.

This is the case in Port domain and EVC domain. In the EVC domain this
is considered as Subscriber OAM
ME1200-TCME1200Unsigned16r/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.8
me1200ConfigInstanceVoe
Make the instance VOE based - if possible
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.9
me1200ConfigInstanceMac
The instance unicast MAC. If 'all zero' the residence port MAC is used
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.10
me1200ConfigInstanceFormat
The MEG-ID format
ME1200MegIdFormatr/w
Type Values:
0ituIcc
1ieeeString
2ituCcIcc
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.11
me1200ConfigInstanceName
IEEE Maintenance Domain Name (string)
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.12
me1200ConfigInstanceMeg
Unique MEG ID (string)
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.13
me1200ConfigInstanceMep
MEP id of this instance
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.14
me1200ConfigInstanceAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.1.1.1.100

me1200ConfigInstancePeerTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigInstancePeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigInstancePeerTable' 
This is a table of peer MEP configuration parameters
me1200ConfigInstancePeerEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.1.3.1
This is a peer MEP configuration parameters
Indexes
Column Syntax OID
me1200ConfigInstancePeerId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.3.1.1
me1200ConfigInstancePeerPeerId
The Peer MEP ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.3.1.2
me1200ConfigInstancePeerMac
The peer unicast MAC
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.815.1.46.1.2.1.3.1.3
me1200ConfigInstancePeerAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.1.3.1.100

me1200ConfigPmTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigPmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigPmTable' 
This is a table of created instance Performance Monitoring
configuration parameters
me1200ConfigPmEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.2.1.1
This is a created instance Performance Monitoring configuration
parameters
Indexes
Column Syntax OID
me1200ConfigPmId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.2.1.1.1
me1200ConfigPmEnable
The instance can enable contribution of LM and DM results to the
Performance Monitoring
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.2.1.1.2

me1200ConfigCcTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigCcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigCcTable' 
This is a table of created instance Continuity Check configuration
parameters
me1200ConfigCcEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.3.1.1
This is a created instance Continuity Check configuration parameters.
Indexes
Column Syntax OID
me1200ConfigCcId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.3.1.1.1
me1200ConfigCcDei
Drop Eligibility Indicator of transmitted CCM
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.3.1.1.2
me1200ConfigCcPrio
Priority of the transmitted CCM. Range 0 to 7
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.3.1.1.3
me1200ConfigCcRate
CCM transmission and expected reception rate
ME1200-TCME1200MepTxRater/w
Type Values:
0invalid
1frames300PerSecond
2frames100PerSecond
3frames10PerSecond
4frames1PerSecond
5frames6PerMinute
6frames1PerMinute
7frames6PerHour
 .1.3.6.1.4.1.9.9.815.1.46.1.2.3.1.1.4
me1200ConfigCcTlv
Enable/disable insertion of TLV in CCM PDU. OS, PS and IS TLV are
inserted
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.3.1.1.5
me1200ConfigCcAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.3.1.1.100

me1200ConfigLmTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.4.1 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigLmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigLmTable' 
This is a table of created instance Loss Measurement configuration
parameters
me1200ConfigLmEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1
This is a created instance Loss Measurement parameters.
Indexes
Column Syntax OID
me1200ConfigLmId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.1
me1200ConfigLmEnded
Dual/single ended selection. CCM or LMM/LMR based. Cannot be changed
after creation.
ME1200Endedr/w
Type Values:
0singleEnded
1dualEnded
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.2
me1200ConfigLmDei
Drop Eligibility Indicator of transmitted LM PDU
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.3
me1200ConfigLmPrio
Priority of the transmitted LM PDU. Range 0 to 7
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.4
me1200ConfigLmRate
LM PDU transmission rate
ME1200-TCME1200MepTxRater/w
Type Values:
0invalid
1frames300PerSecond
2frames100PerSecond
3frames10PerSecond
4frames1PerSecond
5frames6PerMinute
6frames1PerMinute
7frames6PerHour
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.5
me1200ConfigLmCast
Uni/Multicast selection - on CCM based LM only multicast is possible
ME1200Castr/w
Type Values:
0uniCast
1multiCast
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.6
me1200ConfigLmFlrInterval
Frame loss ratio time interval in sec.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.7
me1200ConfigLmLossRatioThreshold
Frame loss ratio threshold.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.8
me1200ConfigLmRxEnable
This enables calculation of far-to-near loss when CCM/LMM/SLM/1SL is
received. Can only be set TRUE when 'enable' is FALSE
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.9
me1200ConfigLmSynthetic
TRUE => LM based on synthetic frames (SLM/1SL). FALSE => LM based on
service frames (LMM/CCM).
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.10
me1200ConfigLmMep
Peer Mep to receive LM - only used if unicast. Value >
VTSS_APPL_MEP_ID_MAX can be used when only one peer-mep (default).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.11
me1200ConfigLmFrameSize
Size of SLM/1SL frame to send.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.12
me1200ConfigLmMeasInterval
Synthetic LM measurement interval.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.13
me1200ConfigLmSlmTestId
Test ID value to use in SLM PDUs.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.14
me1200ConfigLmAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.4.1.1.101

me1200ConfigDmTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.5.1 · 1 row entry · 19 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigDmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigDmTable' 
This is a table of created instance Delay Measurement configuration
parameters
me1200ConfigDmEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1
This is a created instance Delay Measurement parameters.
Indexes
Column Syntax OID
me1200ConfigDmId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.1
me1200ConfigDmEnded
Dual/single ended selection. CCM or LMM/LMR based. Cannot be changed
after creation.
ME1200Endedr/w
Type Values:
0singleEnded
1dualEnded
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.2
me1200ConfigDmDei
Drop Eligibility Indicator of transmitted DM PDU
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.3
me1200ConfigDmPrio
Priority of the transmitted DM PDU. Range 0 to 7
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.4
me1200ConfigDmCast
Uni/Multicast selection
ME1200Castr/w
Type Values:
0uniCast
1multiCast
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.5
me1200ConfigDmMep
Peer MEP to receive DMM/1DM - only used if unicast
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.6
me1200ConfigDmCalcWay
Round trip or flow calculation way selection.
ME1200CalcWayr/w
Type Values:
0roundTrip
1flow
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.7
me1200ConfigDmInterval
Interval between 1DM/DMM in 10 ms. Range Capability dm_interval_min to
dm_interval_max.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.8
me1200ConfigDmLastN
The number of last N measurements used to calculate average delay and
variation. Range Capability dm_lastn_min to dm_lastn_max.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.9
me1200ConfigDmTimeUnit
Calculation time unit.
ME1200-TCME1200MepDmTimeUnitr/w
Type Values:
0microSeconds
1nanoSeconds
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.10
me1200ConfigDmOverflowAct
Action when internal total delay counter overflow.
ME1200Actionr/w
Type Values:
0disableDm
1continueDm
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.11
me1200ConfigDmSynchronized
Near-end and far-end is real-time synchronized. One-way DM calculation
on receiving DMR.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.12
me1200ConfigDmOneWayAverageLastnDelayThreshold
The threshold value in nanoseconds of the one-way delay average in the
last N packets. A SNMP notification is sent when the average of delay
in the last N packets is exceeded this threshold value.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.13
me1200ConfigDmOneWayAverageLastnDelayVariationThreshold
The threshold value in nanoseconds of the one-way delay variation
average in the last N packets. A SNMP notification is sent when the
average of delay variation in the last N packets is exceeded this
threshold value.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.14
me1200ConfigDmTwoWayAverageLastnDelayThreshold
The threshold value in nanoseconds of the two-way delay average in the
last N packets. A SNMP notification is sent when the average of delay
in the last N packets is exceeded this threshold value.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.15
me1200ConfigDmTwoWayAverageLastnDelayVariationThreshold
The threshold value in nanoseconds of the two-way delay variation
average in the last N packets. A SNMP notification is sent when the
average of delay variation in the last N packets is exceeded this
threshold value.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.16
me1200ConfigDmNumOfBinFD
Configurable number of FD Measurement Bins / per Measurement Interval.
default:3, min:2, max:10
ME1200-TCME1200Unsigned16r/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.17
me1200ConfigDmNumOfBinIFDV
Configurable number of IFDV Measurement Bins / per Measurement
Interval. default:3, min:2, max:10
ME1200-TCME1200Unsigned16r/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.18
me1200ConfigDmAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.5.1.1.101

me1200ConfigDmFdBinTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.5.3 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigDmFdBinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigDmFdBinTable' 
This is a table of created instance Frame Delay Measurement Bin
configuration parameters
me1200ConfigDmFdBinEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.5.3.1
This is a created instance Frame Delay Measurement Bin parameters.
Indexes
Column Syntax OID
me1200ConfigDmFdBinId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.3.1.1
me1200ConfigDmFdBinBinNumber
The DM bin number
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.3.1.2
me1200ConfigDmFdBinBinRange
Configurable range of each Measurement Bin in us. default: 5000 us
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.3.1.3

me1200ConfigDmIfdvBinTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.5.4 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigDmIfdvBinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigDmIfdvBinTable' 
This is a table of created instance Inter Frame Delay Variation
Measurement Bin configuration parameters
me1200ConfigDmIfdvBinEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.5.4.1
This is a created instance Inter Frame Delay Variation Measurement Bin
parameters.
Indexes
Column Syntax OID
me1200ConfigDmIfdvBinId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.4.1.1
me1200ConfigDmIfdvBinBinNumber
The DM bin number
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.4.1.2
me1200ConfigDmIfdvBinBinRange
Configurable range of each Measurement Bin in us. default: 5000 us
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.5.4.1.3

me1200ConfigLbTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.6.1 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigLbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigLbTable' 
This is a table of created instance Loop Back configuration parameters
me1200ConfigLbEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1
This is a created instance Loop Back parameters. This cannot be changed
Indexes
Column Syntax OID
me1200ConfigLbId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.1
me1200ConfigLbDei
Drop Eligibility Indicator of transmitted LBM PDU
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.2
me1200ConfigLbPrio
Priority of the transmitted LBM PDU. Range 0 to 7
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.3
me1200ConfigLbCast
Uni/Multicast selection
ME1200Castr/w
Type Values:
0uniCast
1multiCast
 .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.4
me1200ConfigLbMep
Peer MEP to receive LBM - only used if unicast and 'mac' is 'all zero'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.5
me1200ConfigLbMac
Unicast MAC address to receive LBM - has to be used to send LBM to MIP.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.6
me1200ConfigLbToSend
Number of LBM to send. Capability lb_to_send_infinite => test
behaviour. Requires VOE.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.7
me1200ConfigLbSize
Size of LBM frame to send - Range Capability lbm_size_min to
lbm_size_max
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.8
me1200ConfigLbInterval
Frame interval.

If 'ToSend' != Capability lb_to_send_infinite then the 'Interval' is in
10 ms. Max 1 s.

If 'ToSend' == Capability lb_to_send_infinite then the 'Interval' is in
1 us. Max 10 …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.9
me1200ConfigLbAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.6.1.1.101

me1200ConfigTstTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.7.1 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigTstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigTstTable' 
This is a table of created instance Test Signal configuration
parameters
me1200ConfigTstEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1
This is a created instance Test Signal parameters.
Indexes
Column Syntax OID
me1200ConfigTstId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.1
me1200ConfigTstTxEnable
Enable/disable transmission of TST PDU.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.2
me1200ConfigTstRxEnable
Enable/disable reception and analyse of TST PDU.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.3
me1200ConfigTstDei
Drop Eligibility Indicator of transmitted TST PDU
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.4
me1200ConfigTstPrio
Priority of the transmitted TST PDU. Range 0 to 7
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.5
me1200ConfigTstMep
Peer MEP to receive TST
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.6
me1200ConfigTstRate
The transmission rate in Kbps - Range 1 to Capability tst_rate_max.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.7
me1200ConfigTstSize
Size of TST frame to send - Range Capability tst_size_min to
tst_size_max.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.8
me1200ConfigTstPattern
Pattern in TST frame Data TLV.
ME1200TstPatternr/w
Type Values:
0allZero
1allOne
2hexAA
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.9
me1200ConfigTstSequence
Sequence number will be inserted - not checked in receiver on Caracal
and Jaguar.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.10
me1200ConfigTstAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.7.1.1.101

me1200ConfigLtTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.8.1 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigLtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigLtTable' 
This is a table of created instance Link Trace configuration parameters
me1200ConfigLtEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.8.1.1
This is a created instance Link Trace parameters. This cannot be
changed
Indexes
Column Syntax OID
me1200ConfigLtId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.8.1.1.1
me1200ConfigLtDei
Drop Eligibility Indicator of transmitted LTM PDU
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.8.1.1.2
me1200ConfigLtPrio
Priority of the transmitted LTM PDU. Range 0 to 7
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.8.1.1.3
me1200ConfigLtMep
Target Peer Mep to receive LTM - only used if 'mac' is 'all zero'
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.8.1.1.4
me1200ConfigLtMac
Unicast MAC address to receive LTM - has to be used to send LTM to MIP.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.815.1.46.1.2.8.1.1.5
me1200ConfigLtTimeToLive
Time To Live.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.8.1.1.6
me1200ConfigLtAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.8.1.1.101

me1200ConfigApsTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.9.1 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigApsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigApsTable' 
This is a table of created instance Automatic Protection Switching
configuration parameters
me1200ConfigApsEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.9.1.1
This is a created instance Automatic Protection Switching parameters.
Indexes
Column Syntax OID
me1200ConfigApsId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.9.1.1.1
me1200ConfigApsDei
Drop Eligibility Indicator of transmitted APS PDU
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.9.1.1.2
me1200ConfigApsPrio
Priority of the transmitted APS PDU. Range 0 to 7
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.9.1.1.3
me1200ConfigApsApsType
Type of APS
ME1200ApsTyper/w
Type Values:
0invalidAps
1linearAps
2ringAps
 .1.3.6.1.4.1.9.9.815.1.46.1.2.9.1.1.4
me1200ConfigApsCast
Uni/multicast selection
ME1200Castr/w
Type Values:
0uniCast
1multiCast
 .1.3.6.1.4.1.9.9.815.1.46.1.2.9.1.1.5
me1200ConfigApsRapsOctet
Last octet in the R-APS multicast DA
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.9.1.1.6
me1200ConfigApsAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.9.1.1.101

me1200ConfigAisTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.10.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigAisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigAisTable' 
This is a table of created instance Alarm Indication Signal
configuration parameters
me1200ConfigAisEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.10.1.1
This is a created instance Alarm Indication Signal parameters.
Indexes
Column Syntax OID
me1200ConfigAisId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.10.1.1.1
me1200ConfigAisProtection
The first three AIS frames are transmitted as fast as possible.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.10.1.1.2
me1200ConfigAisRate
AIS transmission rate
ME1200-TCME1200MepTxRater/w
Type Values:
0invalid
1frames300PerSecond
2frames100PerSecond
3frames10PerSecond
4frames1PerSecond
5frames6PerMinute
6frames1PerMinute
7frames6PerHour
 .1.3.6.1.4.1.9.9.815.1.46.1.2.10.1.1.3
me1200ConfigAisAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.10.1.1.101

me1200ConfigLckTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.11.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigLckTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigLckTable' 
This is a table of created instance Locked Signal configuration
parameters
me1200ConfigLckEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.11.1.1
This is a created instance Locked Signal parameters.
Indexes
Column Syntax OID
me1200ConfigLckId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.11.1.1.1
me1200ConfigLckRate
LCK transmission rate
ME1200-TCME1200MepTxRater/w
Type Values:
0invalid
1frames300PerSecond
2frames100PerSecond
3frames10PerSecond
4frames1PerSecond
5frames6PerMinute
6frames1PerMinute
7frames6PerHour
 .1.3.6.1.4.1.9.9.815.1.46.1.2.11.1.1.2
me1200ConfigLckAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.11.1.1.101

me1200ConfigClientTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.12.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigClientTable' 
This is a table of created instance Client configuration parameters
me1200ConfigClientEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.12.1.1
This is a created instance Client parameters.
Indexes
Column Syntax OID
me1200ConfigClientId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.12.1.1.1
me1200ConfigClientDomain
Client layer domain. Can only be VLAN or EVC.
ME1200InstanceDomainr/w
Type Values:
0port
1evc
2vlan
 .1.3.6.1.4.1.9.9.815.1.46.1.2.12.1.1.2

me1200ConfigClientFlowTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.12.2 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigClientFlowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigClientFlowTable' 
This is a table of client flow configuration parameters
me1200ConfigClientFlowEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.12.2.1
This is a client flow configuration parameters
Indexes
Column Syntax OID
me1200ConfigClientFlowId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.12.2.1.1
me1200ConfigClientFlowFlowId
The Client Flow id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.12.2.1.2
me1200ConfigClientFlowAisPrio
AIS Priority (EVC COS-ID) 0-7. Capability client_prio_highest indicate
highest possible is requested
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.12.2.1.3
me1200ConfigClientFlowLckPrio
LCK Priority (EVC COS-ID) 0-7. Capability client_prio_highest indicate
highest possible is requested
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.12.2.1.4
me1200ConfigClientFlowLevel
Client flow level
ME1200-TCME1200Unsigned8r/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.2.12.2.1.5
me1200ConfigClientFlowAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.12.2.1.100

me1200ConfigSyslogTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.13.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigSyslogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigSyslogTable' 
This is a table of created instance Syslog configuration parameters
me1200ConfigSyslogEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.13.1.1
This is a created instance Syslog configuration parameters
Indexes
Column Syntax OID
me1200ConfigSyslogId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.13.1.1.1
me1200ConfigSyslogEnable
The instance can enable generation of syslog entries
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.13.1.1.2

me1200ConfigLstTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.15.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigLstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigLstTable' 
This is a table of created instance Link State Tracking configuration
parameters
me1200ConfigLstEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.15.1.1
This is a created instance Link State Tracking configuration parameters
Indexes
Column Syntax OID
me1200ConfigLstId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.15.1.1.1
me1200ConfigLstEnable
The instance can enable Link State Tracking. When LST is enabled, Local
SF or received 'isDown' in CCM Interface Status TLV, will bring down
the residence port. Only valid in Up-MEP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.15.1.1.2

me1200ConfigLmAvailTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.2.16.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ConfigLmAvailTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ConfigLmAvailTable' 
This is a table of created instance Loss Measurement Availability
configuration parameters
me1200ConfigLmAvailEntry row .1.3.6.1.4.1.9.9.815.1.46.1.2.16.1.1
This is a created instance Loss Measurement Availability parameters.
Indexes
Column Syntax OID
me1200ConfigLmAvailId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.2.16.1.1.1
me1200ConfigLmAvailEnable
Loss Measurement Availability is enabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.16.1.1.2
me1200ConfigLmAvailLosRatioThr
Availability frame loss ratio threshold in per mille.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.16.1.1.3
me1200ConfigLmAvailInterval
Availability interval - number of measurements with same availability
in order to change Availability state. The valid range is 1 to 1000.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.2.16.1.1.4
me1200ConfigLmAvailMaintenance
Loss Measurement Availability Maintenance enable/disable
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.2.16.1.1.5
me1200ConfigLmAvailAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.46.1.2.16.1.1.101

me1200StatusInstanceTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.1.1 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusInstanceTable' 
This is a table of created instance status
me1200StatusInstanceEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1
This is a created instance status
Indexes
Column Syntax OID
me1200StatusInstanceId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.1
me1200StatusInstanceClevel
Incorrect CCM level received
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.2
me1200StatusInstanceCmeg
Incorrect CCM MEG id received
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.3
me1200StatusInstanceCmep
Incorrect CCM MEP id received
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.4
me1200StatusInstanceCssf
SSF state
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.5
me1200StatusInstanceCais
AIS state. AIS is received.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.6
me1200StatusInstanceClck
Locked State. LCK is received.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.7
me1200StatusInstanceAtsf
Trail Signal fail consequent action is calculated
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.8
me1200StatusInstanceAtsd
Trail Signal degrade consequent action is calculated
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.9
me1200StatusInstanceAblk
Block consequent action is calculated
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.10
me1200StatusInstanceCloop
Loop is detected. CCM is received with own MEP ID and SMAC.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.11
me1200StatusInstanceCconfig
Configuration error detected. CCM is received with own MEP ID.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.1.1.12

me1200StatusInstancePeerTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusInstancePeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusInstancePeerTable' 
This is a table of peer MEP status
me1200StatusInstancePeerEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.1.2.1
This is a peer MEP status
Indexes
Column Syntax OID
me1200StatusInstancePeerId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.2.1.1
me1200StatusInstancePeerPeerId
The Peer MEP ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.2.1.2
me1200StatusInstancePeerCloc
CCM LOC state from peer MEP
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.2.1.3
me1200StatusInstancePeerCrdi
CCM RDI state from peer MEP
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.2.1.4
me1200StatusInstancePeerCperiod
CCM Period state from peer MEP
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.2.1.5
me1200StatusInstancePeerCprio
CCM Priority state from peer MEP
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.1.2.1.6

me1200StatusLmTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusLmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusLmTable' 
This is a table of Loss Measurement status
me1200StatusLmEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1
This is a Loss Measurement status
Indexes
Column Syntax OID
me1200StatusLmId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.1
me1200StatusLmTxCounter
Transmitted PDU (LMM - CCM) containing counters.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.2
me1200StatusLmRxCounter
Received PDU (LMM - CCM) containing counters.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.3
me1200StatusLmNearEndLosCounter
Near end frame loss counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.4
me1200StatusLmFarEndLosCounter
Far end frame loss counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.5
me1200StatusLmNearEndLosRatio
Near end frame loss ratio.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.6
me1200StatusLmFarEndLosRatio
Far end frame loss ratio.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.7
me1200StatusLmNearEndTotalLosRatio
Total Near end frame loss ratio since last clear.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.8
me1200StatusLmFarEndtotalLosRatio
Total Far end frame loss ratio since last clear.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.9
me1200StatusLmIntervalElapsed
Elapsed intervals since last clear.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.1.1.10

me1200StatusLmPeerTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusLmPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusLmPeerTable' 
This is a table of Loss Measurement status
me1200StatusLmPeerEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1
This is a Loss Measurement status
Indexes
Column Syntax OID
me1200StatusLmPeerId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.1
me1200StatusLmPeerPeerId
The Peer MEP ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.2
me1200StatusLmPeerTxCounter
Transmitted PDU (LMM - CCM) containing counters.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.3
me1200StatusLmPeerRxCounter
Received PDU (LMM - CCM) containing counters.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.4
me1200StatusLmPeerNearEndLosCounter
Near end frame loss counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.5
me1200StatusLmPeerFarEndLosCounter
Far end frame loss counter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.6
me1200StatusLmPeerNearEndLosRatio
Near end frame loss ratio.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.7
me1200StatusLmPeerFarEndLosRatio
Far end frame loss ratio.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.8
me1200StatusLmPeerNearEndTotalLosRatio
Total Near end frame loss ratio since last clear.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.9
me1200StatusLmPeerFarEndtotalLosRatio
Total Far end frame loss ratio since last clear.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.10
me1200StatusLmPeerIntervalElapsed
Elapsed intervals since last clear.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.2.2.1.11

me1200StatusDmTwoWayTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.3.1 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusDmTwoWayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusDmTwoWayTable' 
This is a table of Delay Measurement Two Way status
me1200StatusDmTwoWayEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1
This is a Delay Measurement Two Way status
Indexes
Column Syntax OID
me1200StatusDmTwoWayId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.1
me1200StatusDmTwoWayTxCounter
Transmitted DMM/1DM frames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.2
me1200StatusDmTwoWayRxCounter
Received DMM/1DM frames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.3
me1200StatusDmTwoWayRxTimeOutCounter
Received DMR time-out. After transmission of DMM, the DMR is expected
to be received within 1 sec.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.4
me1200StatusDmTwoWayRxErrorCounter
Received error counter. It is considered an error if a delay is
negative or above 1 sec.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.5
me1200StatusDmTwoWayInternalOverflowCounter
The internal total delay counter overflow counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.6
me1200StatusDmTwoWayAverageDelay
The total average delay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.7
me1200StatusDmTwoWayAverageLastnDelay
The last N average delay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.8
me1200StatusDmTwoWayAverageDelayVariation
The total average delay variation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.9
me1200StatusDmTwoWayAverageLastnDelayVariation
The last N average delay variation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.10
me1200StatusDmTwoWayMinimumDelay
The minimum delay measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.11
me1200StatusDmTwoWayMaximumDelay
The maximum delay measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.12
me1200StatusDmTwoWayMinimumDelayVariation
The minimum delay variation measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.13
me1200StatusDmTwoWayMaximumDelayVariation
The maximum delay variation measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.14
me1200StatusDmTwoWayTimeUnit
Calculation time unit.
ME1200-TCME1200MepDmTimeUnit
Type Values:
0microSeconds
1nanoSeconds
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.1.1.15

me1200StatusDmOneWayFarNearTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.3.2 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusDmOneWayFarNearTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusDmOneWayFarNearTable' 
This is a table of Delay Measurement One Way Far to Near status
me1200StatusDmOneWayFarNearEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1
This is a Delay Measurement One Way Far to Near status
Indexes
Column Syntax OID
me1200StatusDmOneWayFarNearId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.1
me1200StatusDmOneWayFarNearTxCounter
Transmitted DMM/1DM frames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.2
me1200StatusDmOneWayFarNearRxCounter
Received DMM/1DM frames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.3
me1200StatusDmOneWayFarNearRxTimeOutCounter
Received DMR time-out. After transmission of DMM, the DMR is expected
to be received within 1 sec.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.4
me1200StatusDmOneWayFarNearRxErrorCounter
Received error counter. It is considered an error if a delay is
negative or above 1 sec.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.5
me1200StatusDmOneWayFarNearInternalOverflowCounter
The internal total delay counter overflow counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.6
me1200StatusDmOneWayFarNearAverageDelay
The total average delay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.7
me1200StatusDmOneWayFarNearAverageLastnDelay
The last N average delay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.8
me1200StatusDmOneWayFarNearAverageDelayVariation
The total average delay variation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.9
me1200StatusDmOneWayFarNearAverageLastnDelayVariation
The last N average delay variation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.10
me1200StatusDmOneWayFarNearMinimumDelay
The minimum delay measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.11
me1200StatusDmOneWayFarNearMaximumDelay
The maximum delay measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.12
me1200StatusDmOneWayFarNearMinimumDelayVariation
The minimum delay variation measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.13
me1200StatusDmOneWayFarNearMaximumDelayVariation
The maximum delay variation measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.14
me1200StatusDmOneWayFarNearTimeUnit
Calculation time unit.
ME1200-TCME1200MepDmTimeUnit
Type Values:
0microSeconds
1nanoSeconds
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.2.1.15

me1200StatusDmOneWayNearFarTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.3.3 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusDmOneWayNearFarTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusDmOneWayNearFarTable' 
This is a table of Delay Measurement One Way Near to Far status
me1200StatusDmOneWayNearFarEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1
This is a Delay Measurement One Way Near to Far status
Indexes
Column Syntax OID
me1200StatusDmOneWayNearFarId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.1
me1200StatusDmOneWayNearFarTxCounter
Transmitted DMM/1DM frames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.2
me1200StatusDmOneWayNearFarRxCounter
Received DMM/1DM frames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.3
me1200StatusDmOneWayNearFarRxTimeOutCounter
Received DMR time-out. After transmission of DMM, the DMR is expected
to be received within 1 sec.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.4
me1200StatusDmOneWayNearFarRxErrorCounter
Received error counter. It is considered an error if a delay is
negative or above 1 sec.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.5
me1200StatusDmOneWayNearFarInternalOverflowCounter
The internal total delay counter overflow counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.6
me1200StatusDmOneWayNearFarAverageDelay
The total average delay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.7
me1200StatusDmOneWayNearFarAverageLastnDelay
The last N average delay.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.8
me1200StatusDmOneWayNearFarAverageDelayVariation
The total average delay variation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.9
me1200StatusDmOneWayNearFarAverageLastnDelayVariation
The last N average delay variation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.10
me1200StatusDmOneWayNearFarMinimumDelay
The minimum delay measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.11
me1200StatusDmOneWayNearFarMaximumDelay
The maximum delay measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.12
me1200StatusDmOneWayNearFarMinimumDelayVariation
The minimum delay variation measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.13
me1200StatusDmOneWayNearFarMaximumDelayVariation
The maximum delay variation measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.14
me1200StatusDmOneWayNearFarTimeUnit
Calculation time unit.
ME1200-TCME1200MepDmTimeUnit
Type Values:
0microSeconds
1nanoSeconds
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.3.1.15

me1200StatusDmFdBinsTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.3.4 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusDmFdBinsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusDmFdBinsTable' 
This is a table of Delay Measurement Frame Delay bins
me1200StatusDmFdBinsEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.3.4.1
This is a Delay Measurement Frame Delay bin entry
Indexes
Column Syntax OID
me1200StatusDmFdBinsId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.4.1.1
me1200StatusDmFdBinsBinNumber
The DM bin number
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.4.1.2
me1200StatusDmFdBinsTwValue
Value for two-way bin.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.4.1.3
me1200StatusDmFdBinsOwFtNValue
Value for one-way far-to-near bin.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.4.1.4
me1200StatusDmFdBinsOwNtFValue
Value for one-way near-to-far bin.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.4.1.5

me1200StatusDmIfdvBinsTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.3.5 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusDmIfdvBinsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusDmIfdvBinsTable' 
This is a table of Delay Measurement Inter Frame Delay Variation bins
me1200StatusDmIfdvBinsEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.3.5.1
This is a Delay Measurement Inter Frame Delay Variation bin entry
Indexes
Column Syntax OID
me1200StatusDmIfdvBinsId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.5.1.1
me1200StatusDmIfdvBinsBinNumber
The DM bin number
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.5.1.2
me1200StatusDmIfdvBinsTwValue
Value for two-way bin.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.5.1.3
me1200StatusDmIfdvBinsOwFtNValue
Value for one-way far-to-near bin.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.5.1.4
me1200StatusDmIfdvBinsOwNtFValue
Value for one-way near-to-far bin.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.3.5.1.5

me1200StatusLbTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.4.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusLbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusLbTable' 
This is a table of Loop Back status
me1200StatusLbEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.4.1.1
This is a Loop Back status
Indexes
Column Syntax OID
me1200StatusLbId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.4.1.1.1
me1200StatusLbTransactionId
This is the transaction id that is used to send the next LBM.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.4.1.1.2
me1200StatusLbReplyCounter
The number of replying MAC. In case of 'infinite' LBM there is only one
reply.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.4.1.1.3
me1200StatusLbLbmTransmitted
The number of transmitted LBM.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.46.1.3.4.1.1.4

me1200StatusLbReplyTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.4.2 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusLbReplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusLbReplyTable' 
This is a table of Loop Back reply status
me1200StatusLbReplyEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.4.2.1
This is a Loop Back reply status
Indexes
Column Syntax OID
me1200StatusLbReplyId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.4.2.1.1
me1200StatusLbReplyReplyId
The LB or LT Reply id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.4.2.1.2
me1200StatusLbReplyMac
LBR source MAC - this is only relevant if not 'infinite' LBM.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.815.1.46.1.3.4.2.1.3
me1200StatusLbReplyLbrReceived
Number LBR received from MAC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.46.1.3.4.2.1.4
me1200StatusLbReplyOutOfOrder
The OOO counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.46.1.3.4.2.1.5

me1200StatusTstTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusTstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusTstTable' 
This is a table of Test Signal status
me1200StatusTstEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.5.1.1
This is a Test Signal status
Indexes
Column Syntax OID
me1200StatusTstId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.5.1.1.1
me1200StatusTstTxCounter
Transmitted TST frames counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.46.1.3.5.1.1.2
me1200StatusTstRxCounter
REceived TST frames counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.46.1.3.5.1.1.3
me1200StatusTstOutOfOrderCounter
Out of Order counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.46.1.3.5.1.1.4
me1200StatusTstRxRate
Receive bit rate in Kbit/s.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.5.1.1.5
me1200StatusTstTestTime
Test time in seconds. The elapsed time since last clear.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.5.1.1.6

me1200StatusLtTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.6.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusLtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusLtTable' 
This is a table of Link Trace status
me1200StatusLtEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.6.1.1
This is a Link Trace status
Indexes
Column Syntax OID
me1200StatusLtId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.1.1.1
me1200StatusLtTransactionId
The transaction id of the latest Link Trace.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.1.1.2
me1200StatusLtReplyCount
Number of replies for this Link Trace transaction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.1.1.3

me1200StatusLtReplyTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.6.2 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusLtReplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusLtReplyTable' 
This is a table of Link Trace reply status
me1200StatusLtReplyEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1
This is a Link Trace reply status
Indexes
Column Syntax OID
me1200StatusLtReplyId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1.1
me1200StatusLtReplyReplyId
The LB or LT Reply id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1.2
me1200StatusLtReplyMode
The reply is done by a MEP or a MIP.
ME1200InstanceMode
Type Values:
0mep
1mip
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1.3
me1200StatusLtReplyDirection
The reply is done by a UP or a Down instance.
ME1200-TCME1200MepInstanceDirection
Type Values:
0down
1up
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1.4
me1200StatusLtReplyTtl
The reply TTL value.
ME1200-TCME1200Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1.5
me1200StatusLtReplyForwarded
The LTM was forwarded.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1.6
me1200StatusLtReplyRelayAction
The relay action.
ME1200RelayAction
Type Values:
0relayUnknown
1relayHit
2relayFdb
3relayMpdb
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1.7
me1200StatusLtReplyLastEgressMac
The Last Egress MAC for this reply.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1.8
me1200StatusLtReplyNextEgressMac
The Next Egress MAC of this reply.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.9.9.815.1.46.1.3.6.2.1.9

me1200StatusCCPeerTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.7.2 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusCCPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusCCPeerTable' 
This is a table of peer MEP CC status
me1200StatusCCPeerEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1
This is a peer MEP CC status
Indexes
Column Syntax OID
me1200StatusCCPeerId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.1
me1200StatusCCPeerPeerId
The Peer MEP ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.2
me1200StatusCCPeerOsTlvOuiFirst
Last received OS TLV - The OUI content first nibble
ME1200-TCME1200Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.3
me1200StatusCCPeerOsTlvOuiSecond
Last received OS TLV - The OUI content second nibble
ME1200-TCME1200Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.4
me1200StatusCCPeerOsTlvOuiThird
Last received OS TLV - The OUI content third nibble
ME1200-TCME1200Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.5
me1200StatusCCPeerOsTlvSubType
Last received OS TLV - The Sub-Type content
ME1200-TCME1200Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.6
me1200StatusCCPeerOsTlvValue
Last received OS TLV - The Value content
ME1200-TCME1200Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.7
me1200StatusCCPeerIsTlvValue
Last received IS TLV - The Value content
ME1200-TCME1200Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.8
me1200StatusCCPeerPsTlvValue
Last received PS TLV - The Value content
ME1200-TCME1200Unsigned8
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.9
me1200StatusCCPeerOsTlvReceived
Last received CCM PDU contained OS TLV
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.10
me1200StatusCCPeerIsTlvReceived
Last received CCM PDU contained IS TLV
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.11
me1200StatusCCPeerPsTlvReceived
Last received CCM PDU contained PS TLV
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.3.7.2.1.12

me1200StatusLmAvailTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.3.8.2 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200StatusLmAvailTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200StatusLmAvailTable' 
This is a table of LM Availability status
me1200StatusLmAvailEntry row .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1
This is a MEP LM Availability status
Indexes
Column Syntax OID
me1200StatusLmAvailId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.1
me1200StatusLmAvailPeerId
The Peer MEP ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.2
me1200StatusLmAvailNearEndAvailState
Near end Availability State.
ME1200AvailState
Type Values:
0available
1unavailable
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.3
me1200StatusLmAvailFarEndAvailState
Far end Availability State.
ME1200AvailState
Type Values:
0available
1unavailable
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.4
me1200StatusLmAvailNearEndAvailCnt
Near end Availability Count.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.5
me1200StatusLmAvailFarEndAvailCnt
Far end Availability Count.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.6
me1200StatusLmAvailNearEndUnAvailCnt
Near end Unavailability Count.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.7
me1200StatusLmAvailFarEndUnAvailCnt
Far end Unavailability Count.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.8
me1200StatusLmAvailNearEndWindowCnt
Near end Window Count.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.9
me1200StatusLmAvailFarEndWindowCnt
Far end Window Count.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.46.1.3.8.2.1.10

me1200ControlLmTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.4.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ControlLmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ControlLmTable' 
This is a table of created instance Loss Measurement control parameters
me1200ControlLmEntry row .1.3.6.1.4.1.9.9.815.1.46.1.4.1.1.1
This is a created instance Loss Measurement control parameters
Indexes
Column Syntax OID
me1200ControlLmId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.4.1.1.1.1
me1200ControlLmClear
Clear the LM results
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.4.1.1.1.2

me1200ControlDmTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.4.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ControlDmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ControlDmTable' 
This is a table of created instance Delay Measurement control
parameters
me1200ControlDmEntry row .1.3.6.1.4.1.9.9.815.1.46.1.4.2.1.1
This is a created instance Delay Measurement control parameters
Indexes
Column Syntax OID
me1200ControlDmId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.4.2.1.1.1
me1200ControlDmClear
Clear the DM results
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.4.2.1.1.2

me1200ControlTstTable

table
.1.3.6.1.4.1.9.9.815.1.46.1.4.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ControlTstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-MEP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-MEP-MIB::me1200ControlTstTable' 
This is a table of created instance Test Signal control parameters
me1200ControlTstEntry row .1.3.6.1.4.1.9.9.815.1.46.1.4.3.1.1
This is a created instance Test Signal control parameters
Indexes
Column Syntax OID
me1200ControlTstId
The MEP instance ID
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.46.1.4.3.1.1.1
me1200ControlTstClear
Clear the TST results
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.46.1.4.3.1.1.2