ME1200-ERPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
67

me1200ErpsConfigTable

table
.1.3.6.1.4.1.9.9.815.1.72.1.2.1 · 1 row entry · 23 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ErpsConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-ERPS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-ERPS-MIB::me1200ErpsConfigTable' 
This is the ERPS group configuration table.
me1200ErpsConfigEntry row .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1
Each entry in this table represents an ERPS group.
Indexes
Column Syntax OID
me1200ErpsConfigGroupIndex
ERPS group index number. Valid range is (1..max groups). The maximum
group number is platform-specific and can be retrieved from the ERPS
capabilities.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.1
me1200ErpsConfigRingType
Type of ring. Can only be set once for a ring instance.
ME1200ErpsRingTyper/w
Type Values:
1major
2sub
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.2
me1200ErpsConfigPort0
ifindex of ring protection port 0. Can only be set once for a ring
instance.
ME1200-TCME1200InterfaceIndexr/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.3
me1200ErpsConfigPort1
ifindex of ring protection Port 1. For interconnected sub-rings this
value must be zero. Can only be set once for a ring instance.
ME1200-TCME1200InterfaceIndexr/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.4
me1200ErpsConfigInterconnectMajorRingGroupIndex
For sub-ring: zero = not interconnected; > zero = index of major ring
group. For major ring: zero = not interconnected; > zero = is
interconnected (i.e flag-like semantics). Can only be set once for a
ring instance.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.5
me1200ErpsConfigVirtualChannel
Whether to use a virtual channel. Can only be set once for a ring
instance.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.6
me1200ErpsConfigPort0SignalFailMepIndex
Index of SignalFail MEP for Port 0. Zero if not set. To clear an ERPS
group's MEP association, set this to zero; it affects all MEP indices.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.7
me1200ErpsConfigPort0ApsMepIndex
Index of APS MEP for Port 0. Zero if not set.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.8
me1200ErpsConfigPort1SignalFailMepIndex
Index of SignalFail MEP for Port 1. Zero if not set. Must be zero for
interconnected sub-rings.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.9
me1200ErpsConfigPort1ApsMepIndex
Index of APS MEP for Port 1. Zero if not set. Must be zero for
interconnected sub-rings with virtual channel.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.10
me1200ErpsConfigHoldOffTime
Hold off time in ms. Value is rounded down to 100ms precision. Valid
range is 0-10000 ms
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.11
me1200ErpsConfigWaitToRestoreTime
Wait-to-Restore time in ms. Valid range is 60000-720000 ms (1-12
minutes).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.12
me1200ErpsConfigGuardTime
Guard time in ms. Valid range is 10-2000 ms.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.13
me1200ErpsConfigRplMode
Ring Protection Link mode.
ME1200ErpsRplModer/w
Type Values:
1none
2owner
3neighbour
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.14
me1200ErpsConfigRplPort
RPL port. Only valid if the ERPS group is RPL owner or neighbour.
ME1200ErpsPortr/w
Type Values:
1port0
2port1
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.15
me1200ErpsConfigRevertive
Revertive (true) or Non-revertive (false) mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.16
me1200ErpsConfigVersion
ERPS protocol version.
ME1200ErpsVersionr/w
Type Values:
1version1
2version2
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.17
me1200ErpsConfigTopologyChange
Whether to enable Topology Change propagation; only valid for an
interconnected node.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.18
me1200ErpsConfigProtectedVlans0Kto1K
First quarter of bit-array indicating whether a VLAN is protected by
this ring instance ('1') or not ('0').
ME1200-TCME1200VlanListQuarterr/w
Type Constraints:
range: 128
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.19
me1200ErpsConfigProtectedVlans1Kto2K
Second quarter of bit-array indicating whether a VLAN is protected by
this ring instance ('1') or not ('0').
ME1200-TCME1200VlanListQuarterr/w
Type Constraints:
range: 128
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.20
me1200ErpsConfigProtectedVlans2Kto3K
Third quarter of bit-array indicating whether a VLAN is protected by
this ring instance ('1') or not ('0').
ME1200-TCME1200VlanListQuarterr/w
Type Constraints:
range: 128
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.21
me1200ErpsConfigProtectedVlans3Kto4K
Fourth quarter of bit-array indicating whether a VLAN is protected by
this ring instance ('1') or not ('0').
ME1200-TCME1200VlanListQuarterr/w
Type Constraints:
range: 128
 .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.22
me1200ErpsConfigAction
Action
ME1200-TCME1200RowEditorStater/w .1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.100

me1200ErpsStatusTable

table
.1.3.6.1.4.1.9.9.815.1.72.1.3.1 · 1 row entry · 28 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ErpsStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-ERPS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-ERPS-MIB::me1200ErpsStatusTable' 
This table contains status per EPRS group.
me1200ErpsStatusEntry row .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1
Status.
Indexes
Column Syntax OID
me1200ErpsStatusGroupIndex
ERPS group index number. Valid range is (1..max groups). The maximum
group number is platform-specific and can be retrieved from the ERPS
capabilities.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.1
me1200ErpsStatusActive
Specifies whether ERPS group is currently active or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.2
me1200ErpsStatusProtectionState
Specifies current ERPS group protection state.
ME1200ErpsProtectionState
Type Values:
1none
2idle
3protected
4forcedSwitch
5manualSwitch
6pending
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.3
me1200ErpsStatusRplBlocked
Specifies whether the RPL is currently blocked or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.4
me1200ErpsStatusWtrRemaining
Specifies the remaining wait-time before restoring ring.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.5
me1200ErpsStatusAdminCmd
Specifies the currently active administrative command.
ME1200ErpsAdminCmd
Type Values:
1manualSwitch
2forcedSwitch
3clear
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.6
me1200ErpsStatusFopAlarm
Specifies whether the FailureOfProtocol alarm is currently active or
not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.7
me1200ErpsStatusTxActive
Specifies whether R-APS transmission is currently active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.8
me1200ErpsStatusTxRequestOrState
Specifies the currently transmitted request/state. Only relevant when
Tx is active.
ME1200ErpsRequestState
Type Values:
1none
2manualSwitch
3signalFail
4forcedSwitch
5event
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.9
me1200ErpsStatusTxRplBlocked
Specifies the currently transmitted RPL Blocked flag. Only relevant
when Tx is active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.10
me1200ErpsStatusTxDoNotFlush
Specifies the currently transmitted Do Not Flush flag. Only relevant
when Tx is active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.11
me1200ErpsStatusBlockedPortReference
Specifies the currently transmitted Blocked Port Reference. Only
relevant when Tx is active.
ME1200ErpsPort
Type Values:
1port0
2port1
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.12
me1200ErpsStatusPort0Blocked
Specifies whether ring Port 0 is blocked or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.13
me1200ErpsStatusPort0State
Specifies the state of ring Port 0.
ME1200ErpsPortState
Type Values:
1ok
2signalFail
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.14
me1200ErpsStatusPort0RxActive
Specifies if ring Port0 receives R-APS.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.15
me1200ErpsStatusPort0RxRequestOrState
Specifies the most recently received request/state on ring Port 0. Only
relevant when Rx is active.
ME1200ErpsRequestState
Type Values:
1none
2manualSwitch
3signalFail
4forcedSwitch
5event
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.16
me1200ErpsStatusPort0RxRplBlocked
Specifies the most recently received RPL Blocked flag on ring Port 0.
Only relevant when Rx is active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.17
me1200ErpsStatusPort0RxDoNotFlush
Specifies the most recently received Do Not Flush flag on ring Port 0.
Only relevant when Rx is active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.18
me1200ErpsStatusPort0RxBlockedPortReference
Specifies the most recently received Blocked Port Reference on ring
Port 0. Only relevant when Rx is active.
ME1200ErpsPort
Type Values:
1port0
2port1
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.19
me1200ErpsStatusPort0RxNodeId
Specifies the most recently received node ID on ring Port 0. Only
relevant when Rx is active.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.20
me1200ErpsStatusPort1Blocked
Specifies whether ring Port 1 is blocked or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.21
me1200ErpsStatusPort1State
Specifies the state of ring Port 1.
ME1200ErpsPortState
Type Values:
1ok
2signalFail
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.22
me1200ErpsStatusPort1RxActive
Specifies if ring Port1 receives R-APS.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.23
me1200ErpsStatusPort1RxRequestOrState
Specifies the most recently received request/state on ring Port 1. Only
relevant when Rx is active.
ME1200ErpsRequestState
Type Values:
1none
2manualSwitch
3signalFail
4forcedSwitch
5event
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.24
me1200ErpsStatusPort1RxRplBlocked
Specifies the most recently received RPL Blocked flag on ring Port 1.
Only relevant when Rx is active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.25
me1200ErpsStatusPort1RxDoNotFlush
Specifies the most recently received Do Not Flush flag on ring Port 1.
Only relevant when Rx is active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.26
me1200ErpsStatusPort1RxBlockedPortReference
Specifies the most recently received Blocked Port Reference on ring
Port 1. Only relevant when Rx is active.
ME1200ErpsPort
Type Values:
1port0
2port1
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.27
me1200ErpsStatusPort1RxNodeId
Specifies the most recently received node ID on ring Port 1. Only
relevant when Rx is active.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.28

me1200ErpsStatisticsTable

table
.1.3.6.1.4.1.9.9.815.1.72.1.4.1 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ErpsStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-ERPS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-ERPS-MIB::me1200ErpsStatisticsTable' 
This table contains statistics per EPRS group.
me1200ErpsStatisticsEntry row .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1
Various PDU and event counters.
Indexes
Column Syntax OID
me1200ErpsStatisticsGroupIndex
ERPS group index number. Valid range is (1..max groups). The maximum
group number is platform-specific and can be retrieved from the ERPS
capabilities.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.1
me1200ErpsStatisticsRapsTx
Number of transmitted RAPS PDUs.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.2
me1200ErpsStatisticsRapsRx
Number of received RAPS PDUs.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.3
me1200ErpsStatisticsRapsRxDrop
Number of received RAPS PDUs that were dropped.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.4
me1200ErpsStatisticsLocalSF
Number of local SignalFail events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.5
me1200ErpsStatisticsLocalSFCleared
Number of local SignalFail clear events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.6
me1200ErpsStatisticsRemoteSF
Number of remote SignalFail events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.7
me1200ErpsStatisticsNR
Number of NoRequest events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.8
me1200ErpsStatisticsRemoteMS
Number of remote ManualSwitch events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.9
me1200ErpsStatisticsLocalMS
Number of local ManualSwitch events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.10
me1200ErpsStatisticsRemoteFS
Number of remote ForcedSwitch events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.11
me1200ErpsStatisticsLocalFS
Number of local ForcedSwitch events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.12
me1200ErpsStatisticsAdminClear
Number of AdminClear events.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.13

me1200ErpsControlTable

table
.1.3.6.1.4.1.9.9.815.1.72.1.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk me1200ErpsControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ME1200-ERPS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ME1200-ERPS-MIB::me1200ErpsControlTable' 
This is the ERPS group control table.
me1200ErpsControlEntry row .1.3.6.1.4.1.9.9.815.1.72.1.5.1.1
Each entry in this table represents dynamic control elements an ERPS
group.
Indexes
Column Syntax OID
me1200ErpsControlGroupIndex
ERPS group index number. Valid range is (1..max groups). The maximum
group number is platform-specific and can be retrieved from the ERPS
capabilities.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.815.1.72.1.5.1.1.1
me1200ErpsControlCommand
Control command to execute. Always returns none when read.
ME1200ErpsControlCmdr/w
Type Values:
0none
1admCmdForcedSwitch
2admCmdManualSwitch
3admCmdClear
4statisticsClear
 .1.3.6.1.4.1.9.9.815.1.72.1.5.1.1.2
me1200ErpsControlPort
Ring port affected by control command. Only relevant for administrative
commands. Always returns port0 when read.
ME1200ErpsPortr/w
Type Values:
1port0
2port1
 .1.3.6.1.4.1.9.9.815.1.72.1.5.1.1.3