MCAST-VPN-MIB Table View

This table specifies the general information about the MVRFs 
present in this device.

jnxMvpnGeneralEntry row .1.3.6.1.4.1.2636.5.12.1.1.2.1.1

An entry in this table is created for every MVRF in the
device.

Indexes

MPLS-VPN-MIBmplsVpnVrfName

Column	Syntax	OID
jnxMvpnGenOperStatusChange This object describes the last operational change that happened for the given MVRF. createdMvrf - indicates that the MVRF was created in the device. deletedMvrf - indicates that the MVRF…	Enumeration Enumerated Values: 1 createdMvrf 2 deletedMvrf 3 modifiedMvrfIpmsiConfig 4 modifiedMvrfSpmsiConfig	.1.3.6.1.4.1.2636.5.12.1.1.2.1.1.1
jnxMvpnGenOperChangeTime The time at which the last operational change for the MVRF in question took place. The last operational change is specified by mvpnGenOperStatusChange.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2636.5.12.1.1.2.1.1.2
jnxMvpnGenCmcastRouteProtocolV4 Protocol used to signal IPv4 C-multicast states across the provider core. pim(1): PIM (PIM-MVPN). bgp(2): BGP (BGP-MVPN).	Enumeration Enumerated Values: 1 pim 2 bgp	.1.3.6.1.4.1.2636.5.12.1.1.2.1.1.3
jnxMvpnGenCmcastRouteProtocolV6 Protocol used to signal IPv6 C-multicast states across the provider core. pim(1): PIM (PIM-MVPN). bgp(2): BGP (BGP-MVPN).	Enumeration Enumerated Values: 1 pim 2 bgp	.1.3.6.1.4.1.2636.5.12.1.1.2.1.1.4
jnxMvpnGenIpmsiConfigV4 This points to a row in MvpnPmsiConfigTable, for I-PMSI configuration for IPv4.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.12.1.1.2.1.1.5
jnxMvpnGenIpmsiConfigV6 This points to a row in MvpnPmsiConfigTable, for I-PMSI configuration for IPv6.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.12.1.1.2.1.1.6
jnxMvpnGenInterAsPmsiConfigV4 This points to a row in MvpnPmsiConfigTable, for inter-as I-PMSI configuration for IPv4, in case of segmented inter-as provider tunnels.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.12.1.1.2.1.1.7
jnxMvpnGenInterAsPmsiConfigV6 This points to a row in MvpnPmsiConfigTable, for inter-as I-PMSI configuration for IPv6, in case of segmented inter-as provider tunnels.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.12.1.1.2.1.1.8
jnxMvpnGenRowStatus This is used to create or delete a row in this table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.12.1.1.2.1.1.9

This table augments the mvpnGeneralTable and is for BGP-MVPN
specific information.

jnxMvpnBgpGeneralEntry row .1.3.6.1.4.1.2636.5.12.1.1.2.2.1

The mvpnBgpGeneralEntry matches and augments an mvpnGeneralEntry
for a BGP-MVPN instance, with BGP-MVPN specific informatoin.

Indexes

No indexes recorded

Column	Syntax	OID
jnxMvpnBgpGenMode For two different BGP-MVPN modes: rpt-spt(1): intersite-site shared tree mode spt-only(2): inter-site source-only tree mode.	Enumeration Enumerated Values: 1 rpt-spt 2 spt-only	.1.3.6.1.4.1.2636.5.12.1.1.2.2.1.1
jnxMvpnBgpGenUmhSelection The UMH selection method for this mvpn, as specified in section 5.1.3 of [MVPN]: highest-pe-address (1): PE with the highest address c-root-group-hashing (2): hashing based on (c-root, c-group) uncast-umh-route …	Enumeration Enumerated Values: 1 highest-pe-address 2 c-root-group-hashing 3 ucast-umh-route	.1.3.6.1.4.1.2636.5.12.1.1.2.2.1.2
jnxMvpnBgpGenSiteType Whether this site is a receiver-only site or not. sender-receiver (1): both sender and receiver site. receiver-only (2): receiver-only site. sender-only (3): sender-only site.	Enumeration Enumerated Values: 1 sender-receiver 2 receiver-only 3 sender-only	.1.3.6.1.4.1.2636.5.12.1.1.2.2.1.3
jnxMvpnBgpGenCmcastImportRt The C-multicast Import RT that this device adds to unicast vpn routes that it advertises for this mvpn.	MPLS-VPN-MIBMplsVpnRouteDistinguisher Type Constraints: range: 0..256	.1.3.6.1.4.1.2636.5.12.1.1.2.2.1.4
jnxMvpnBgpGenSrcAs The Source AS number in Source AS Extended Community that this device adds to the unicast vpn routes that it advertises for this mvpn.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.2.2.1.5
jnxMvpnBgpGenSptnlLimit The max number of selective provider tunnels this device allows for this mvpn.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.2.2.1.6

This table specifies the configured PMSIs.

jnxMvpnPmsiConfigEntry row .1.3.6.1.4.1.2636.5.12.1.1.3.1.1

An entry in this table is created for each PMSI configured
on this router. It can be referred to by either I-PMSI
configuration (in mvpnGeneralEntry) or S-PMSI configuration
(in mvpnSpmsiConfigEntry)

Indexes

jnxMvpnPmsiConfigTunnelType jnxMvpnPmsiConfigTunnelAuxInfo jnxMvpnPmsiConfigTunnelPimGroupAddressType jnxMvpnPmsiConfigTunnelPimGroupAddress jnxMvpnPmsiConfigTunnelOrTemplateName

Column	Syntax	OID
jnxMvpnPmsiConfigTunnelType Type of tunnel used to instantiate the PMSI.	L2L3-VPN-MCAST-MIBJnxL2L3VpnMcastProviderTunnelType Type Values: 0 unconfigured 1 rsvp-p2mp 2 ldp-p2mp 3 pim-ssm 4 pim-asm 5 pim-bidir 6 ingress-replication 7 ldp-mp2mp	.1.3.6.1.4.1.2636.5.12.1.1.3.1.1.1
jnxMvpnPmsiConfigTunnelAuxInfo Additional tunnel information depending on the type. pim: In case of S-PMSI, number of groups starting at mvpnPmsiConfigTunnelPimGroupAddress. This allows a range of PIM provider tunnel…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.3.1.1.2
jnxMvpnPmsiConfigTunnelPimGroupAddressType In case of PIM provider tunnel, the type of tunnel address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.12.1.1.3.1.1.3
jnxMvpnPmsiConfigTunnelPimGroupAddress In case of PIM provider tunnel, the provider tunnel address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.12.1.1.3.1.1.4
jnxMvpnPmsiConfigTunnelOrTemplateName The tunnel name or template name used to create tunnels. Depending on mvpnPmsiConfigTunnelType and mvpnPmsiConfigTunnelAuxInfo: dynamically created rsvp-p2mp tunnel: template name statically specifi…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.12.1.1.3.1.1.5
jnxMvpnPmsiConfigEncapsType The encapsulation type to be used, in case of PIM tunnel or ingress-replication.	Enumeration Enumerated Values: 1 greIp 2 ipIp 3 mpls	.1.3.6.1.4.1.2636.5.12.1.1.3.1.1.6
jnxMvpnPmsiConfigRowStatus Used to create/modify/delete a row in this table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.12.1.1.3.1.1.7

This table specifies S-PMSI configuration.

jnxMvpnSpmsiConfigEntry row .1.3.6.1.4.1.2636.5.12.1.1.3.2.1

An entry is created for each S-PMSI configuration.

Indexes

MPLS-VPN-MIBmplsVpnVrfName jnxMvpnSpmsiConfigCmcastAddressType jnxMvpnSpmsiConfigCmcastGroupAddress jnxMvpnSpmsiConfigCmcastGroupPrefixLen jnxMvpnSpmsiConfigCmcastSourceAddress jnxMvpnSpmsiConfigCmcastSourcePrefixLen

Column	Syntax	OID
jnxMvpnSpmsiConfigCmcastAddressType Type of C-multicast address	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.12.1.1.3.2.1.1
jnxMvpnSpmsiConfigCmcastGroupAddress C-multicast group address	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.12.1.1.3.2.1.2
jnxMvpnSpmsiConfigCmcastGroupPrefixLen C-multicast group address prefix length. A group 0 (or ::0) with prefix length 32 (or 128) indicates wildcard group, while a group 0 (or ::0) with prefix length 0 indicates any group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.3.2.1.3
jnxMvpnSpmsiConfigCmcastSourceAddress C-multicast source address	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.12.1.1.3.2.1.4
jnxMvpnSpmsiConfigCmcastSourcePrefixLen C-multicast source address prefix length. A source 0 (or ::0) with prefix length 32 (or 128) indicates a wildcard source, while a source 0 (or ::0) with prefix length 0 indicates any source.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.3.2.1.5
jnxMvpnSpmsiConfigThreshold The bandwidth threshold value which when exceeded for a multicast routing entry in the given MVRF, triggers usage of S-PMSI.	kilobits per secondUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2636.5.12.1.1.3.2.1.6
jnxMvpnSpmsiConfigPmsiPointer This points to a row in MvpnPmsiConfigTable, to specify tunnel attributes.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.12.1.1.3.2.1.7
jnxMvpnSpmsiConfigRowStatus Used to create/modify/delete a row in this table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.12.1.1.3.2.1.8

This table is for all advertised/received I-PMSI
advertisements.

jnxMvpnIpmsiEntry row .1.3.6.1.4.1.2636.5.12.1.1.4.1.1

An entry in this table corresponds to an I-PMSI
advertisement that is advertised/received on this router.
This represents all the sender PEs in the MVPN,
with the provider tunnel they use to send traffic.

Indexes

MPLS-VPN-MIBmplsVpnVrfName jnxMvpnIpmsiAfi jnxMvpnIpmsiRD jnxMvpnIpmsiOrigAddrType jnxMvpnIpmsiOrigAddress

Column	Syntax	OID
jnxMvpnIpmsiAfi The address family this I-PMSI is for. 1 - IPv4 2 - IPv6	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.2636.5.12.1.1.4.1.1.1
jnxMvpnIpmsiRD The Route Distinguisher in this I-PMSI.	MPLS-VPN-MIBMplsVpnRouteDistinguisher Type Constraints: range: 0..256	.1.3.6.1.4.1.2636.5.12.1.1.4.1.1.2
jnxMvpnIpmsiOrigAddrType The Internet address type of mvpnIpmsiOrigAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.12.1.1.4.1.1.3
jnxMvpnIpmsiOrigAddress The BGP address of the device that originated the I-PMSI.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.12.1.1.4.1.1.4
jnxMvpnIpmsiUpTime The time since this I-PMSI was first advertised/received by the device.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2636.5.12.1.1.4.1.1.5
jnxMvpnIpmsiAttribute Points to a row in the mvpnPmsiTunnelAttributeTable.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.12.1.1.4.1.1.6

This table is for all advertised/received inter-as I-PMSI
advertisements.

jnxMvpnInterasIpmsiEntry row .1.3.6.1.4.1.2636.5.12.1.1.4.2.1

An entry in this table corresponds to an inter-as I-PMSI
advertisement that is advertised/received on this router.
This represents all the ASes in the MVPN,
with the provider tunnel used to send traffic to.

Indexes

MPLS-VPN-MIBmplsVpnVrfName jnxMvpnInterasIpmsiAfi jnxMvpnInterasIpmsiRD jnxMvpnInterasIpmsiSrcAs

Column	Syntax	OID
jnxMvpnInterasIpmsiAfi The address family this I-PMSI is for. 1 - IPv4 2 - IPv6	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.2636.5.12.1.1.4.2.1.1
jnxMvpnInterasIpmsiRD The Route Distinguisher in this inter-as I-PMSI.	MPLS-VPN-MIBMplsVpnRouteDistinguisher Type Constraints: range: 0..256	.1.3.6.1.4.1.2636.5.12.1.1.4.2.1.2
jnxMvpnInterasIpmsiSrcAs The source-as in this inter-as I-PMSI.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.4.2.1.3
jnxMvpnInterasIpmsiAttribute Points to a row in the mvpnPmsiTunnelAttributeTable.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.12.1.1.4.2.1.4

This table has information about the S-PMSIs sent/received
by a device.

jnxMvpnSpmsiEntry row .1.3.6.1.4.1.2636.5.12.1.1.4.3.1

An entry in this table is created or updated for every S-PMSI
advertised/received in a particular MVRF.

Indexes

MPLS-VPN-MIBmplsVpnVrfName jnxMvpnSpmsiOrigAddrType jnxMvpnSpmsiOrigAddress jnxMvpnSpmsiCmcastAddrType jnxMvpnSpmsiCmcastGroup jnxMvpnSpmsiCmcastGroupPrefixLen jnxMvpnSpmsiCmcastSource jnxMvpnSpmsiCmcastSourcePrefixLen

Column	Syntax	OID
jnxMvpnSpmsiOrigAddrType The Internet address type of mvpnSpmsiOrigAddress.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.1
jnxMvpnSpmsiOrigAddress The BGP address of the device that originated the S-PMSI.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.2
jnxMvpnSpmsiCmcastAddrType The Internet address type of mvpnSpmsiCmcastGroup/Source.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.3
jnxMvpnSpmsiCmcastGroup S-PMSI C-multicast group address. If it is 0 (or ::0), this is a wildcard group, and mvpnSpmsiCmcastGroupPrefixLen must be 32 (or 128).	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.4
jnxMvpnSpmsiCmcastGroupPrefixLen S-PMSI C-multicast group address prefix length.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.5
jnxMvpnSpmsiCmcastSource S-PMSI C-multicast source address If it is 0 (or ::0), this is a wildcard source, and mvpnSpmsiCmcastSourcePrefixLen must be 32 (or 128).	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.6
jnxMvpnSpmsiCmcastSourcePrefixLen S-PMSI C-multicast source address prefix length.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.7
jnxMvpnSpmsiTunnelAttribute A row pointer to the mvpnPmsiTunnelAttributeTable	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.8
jnxMvpnSpmsiUpTime The time since this S-PMSI was first advertised/received by the device.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.9
jnxMvpnSpmsiExpTime For UDP-based S-PMSI signaling for PIM-MVPN, the amount of time remaining before this received S-PMSI Join Message expires, or the next S-PMSI Join Message refresh is to be advertised again from the device. Otherwise, …	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.10
jnxMvpnSpmsiRefCnt The number of c-multicast routes that are mapped to this S-PMSI.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.4.3.1.11

This table augments ipMcastRouteTable, to provide some MVPN 
specific information.

jnxMvpnMrouteEntry row .1.3.6.1.4.1.2636.5.12.1.1.4.4.1

The mvpnMrouteEntry matches and augments an ipMcastRouteTable,
with MVPN specific information, such as PMSI used.

Indexes

No indexes recorded

Column	Syntax	OID
jnxMvpnMroutePmsiPointer The I-PMSI or S-PMSI this C-multicast route is using. This is important because an implementation may not have an interface corresponding to a provider tunnel, that can be used in ipMcastRouteNextHopEntry.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2636.5.12.1.1.4.4.1.1
jnxMvpnMrouteNumberOfLocalReplication Number of replications to local receivers.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.4.4.1.2
jnxMvpnMrouteNumberOfRemoteReplication Number of (local) replications to remote receivers.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.12.1.1.4.4.1.3
jnxMvpnMrouteDataRate The data rate for traffic following this route.	kilobits per secondUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2636.5.12.1.1.4.4.1.4