L2L3-VPN-MCAST-MIB
This MIB contains common managed object definitions for
multicast in Layer 2 and Layer 3 VPNs, defined by
[I-D.ietf-l2vpn-vpls-mcast] and RFC 6513/6514.
Copyright (C) The Internet Society (2012).
- Source file
L2L3-VPN-MCAST-MIB- Last revised
- Identity
jnxL2L3VpnMcastMIB- Base OID
1.3.6.1.4.1.2636.5.11.1
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| JUNIPER-EXPERIMENT-MIB | jnxL2L3VpnMcastExperiment |
| JUNIPER-SMI | jnxMibs |
| MPLS-TC-STD-MIB | MplsLabel |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | experimental MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus TEXTUAL-CONVENTION (no object page) TimeInterval TimeStamp TruthValue |
Net-SNMP examples using the juniper MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'L2L3-VPN-MCAST-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'L2L3-VPN-MCAST-MIB::jnxL2L3VpnMcastMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'L2L3-VPN-MCAST-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'L2L3-VPN-MCAST-MIB::jnxL2L3VpnMcastMIB'
Objects (11)
Showing 11 of 11 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.2636.5.11.1 |
||
.1.3.6.1.4.1.2636.5.11.1.1 |
||
.1.3.6.1.4.1.2636.5.11.1.1.1 |
||
.1.3.6.1.4.1.2636.5.11.1.1.1.1 |
||
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.1 |
|
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.2 |
||
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.3 |
||
|
OctetString
|
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.4 |
|
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.5 |
||
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.6 |
Dependencies (8) 8 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- JUNIPER-SMIjuniper
- JUNIPER-EXPERIMENT-MIBjuniper
- MPLS-TC-STD-MIBrfc
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- L2L3-VPN-MCAST-MIBjuniperselected
Type Definitions (1)
| Enumeration |
unconfigured(0)rsvp-p2mp(1)ldp-p2mp(2)pim-ssm(3)pim-asm(4)pim-bidir(5)ingress-replication(6)ldp-mp2mp(7) |