MCAST-VLAN-MIB Table View

This contains information about the IGMP snooping multicast VLAN table.

swISMVlanEntry row .1.3.6.1.4.1.171.12.64.3.1.1

This is an entry of the swISMVlanTable.

Indexes

swISMVlanID

Column	Syntax	OID
swISMVlanID This indicates the VLAN ID of the IGMP snooping multicast VLAN entry.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.171.12.64.3.1.1.1
swISMVlanName This indicates the VLAN name of the IGMP snooping multicast VLAN entry.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.171.12.64.3.1.1.2
swISMVlanSourcePort This indicates the port list of the source ports of the IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports will be forw…	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.64.3.1.1.3
swISMVlanMemberPort This indicates the port list of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry and the IGMP control messages received from the member ports will be…	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.64.3.1.1.4
swISMVlanTagMemberPort This indicates the port list of the tag member ports of the IGMP snooping multicast VLAN.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.64.3.1.1.5
swISMVlanUntagSourcePort This indicates the untagged member ports to add to the multicast VLAN.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.64.3.1.1.6
swISMVlanState This can be used to enable or disable the IGMP snooping multicast VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.64.3.1.1.7
swISMVlanRepSourceAddrType This is the type of multicast VLAN replacement address as specified by object 'swISMVlanRepSourceAddr'.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.12.64.3.1.1.8
swISMVlanRepSourceAddr This is the replacement address of this multicast VLAN.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.12.64.3.1.1.9
swISMVlanRemapPriority This is the priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to -1, the packet's original priority will be used.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.12.64.3.1.1.10
swISMVlanReplacePriority This specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.64.3.1.1.11
swISMVlanProfileIDList This specifies a profile ID list for each VLAN ID of the IGMP snooping multicast VLAN entry.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.12.64.3.1.1.12
swISMVlanRowStatus This indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.64.3.1.1.13
swISMVlanRepSourceAddrActionType This object specifies that swISMVlanRepSourceAddr is user configured IP address or 'System' interface's primary address. If this object is 'not-replace', identifies swISMVlanRepSourceAddr object does not take effect.	Enumerationr/w Enumerated Values: 1 user-configure 2 system-ip 3 not-replace	.1.3.6.1.4.1.171.12.64.3.1.1.14
swISMVlanRepSourceAddrFromPorts If from is specified, the user need choose the port role on which the replace source IP function will work. The default setting is 'both'. If 'souce_port' is chosen, source IP address of the IGMP report/leave packet …	Enumerationr/w Enumerated Values: 1 source-port 2 member-port 3 both	.1.3.6.1.4.1.171.12.64.3.1.1.15
swISMVlanCustomerVlanID Specify Tthe customer VALN ID carrying in IGMP query when QinQ function is enabled. If zero is specified, no customer VLAN ID will be carried in IGMP query. The default setting is zero.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.171.12.64.3.1.1.16

This table contains the IGMP snooping multicast VLAN
group profile name.

swISMVlanGroupProfEntry row .1.3.6.1.4.1.171.12.64.3.2.1

This is an entry of the swISMVlanGroupProfTable.

Indexes

swISMVlanGroupProfName

Column	Syntax	OID
swISMVlanGroupProfName This indicates the name of the IGMP snooping multicast VLAN group profile.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.12.64.3.2.1.1
swISMVlanGroupProfID This indicates the index of the IGMP snooping multicast VLAN group profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.64.3.2.1.2
swISMVlanGroupProfStatus This indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.64.3.2.1.3

This table contains the multicast address of each
IGMP snooping multicast VLAN group profile.

swISMVlanGroupProfAddrEntry row .1.3.6.1.4.1.171.12.64.3.3.1

This is an entry of the swISMVlanGroupProfAddrTable.

Indexes

swISMVlanGroupProfName swISMVlanGroupProfAddrType swISMVlanGroupProfAddrStart swISMVlanGroupProfAddrEnd

Column	Syntax	OID
swISMVlanGroupProfAddrType This is the type of multicast address as specified by object 'swISMVlanGroupProfAddrToIp'.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.12.64.3.3.1.1
swISMVlanGroupProfAddrStart This specifies the multicast address list for this profile.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.12.64.3.3.1.2
swISMVlanGroupProfAddrEnd The specifies the multicast address list for this profile.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.12.64.3.3.1.3
swISMVlanGroupProfAddrStatus This indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.64.3.3.1.4

This contains information about the MLD snooping multicast VLAN table.

swMSMVlanEntry row .1.3.6.1.4.1.171.12.64.3.4.1

This is an entry of the swMSMVlanTable.

Indexes

swMSMVlanID

Column	Syntax	OID
swMSMVlanID This indicates the VLAN ID of the MLD snooping multicast VLAN entry.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.171.12.64.3.4.1.1
swMSMVlanName This indicates the VLAN name of the MLD snooping multicast VLAN entry.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.171.12.64.3.4.1.2
swMSMVlanSourcePort This indicates the port list of the source ports of the MLD snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the MLD control messages received from the member ports will be forwar…	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.64.3.4.1.3
swMSMVlanMemberPort This indicates the port list of the member ports of the MLD snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry and the MLD control messages received from the member ports will be f…	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.64.3.4.1.4
swMSMVlanTagMemberPort This indicates the port list of the tag member ports of the MLD snooping multicast VLAN.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.64.3.4.1.5
swMSMVlanUntagSourcePort This indicates the untagged member ports to add to the multicast VLAN.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.12.64.3.4.1.6
swMSMVlanState This can be used to enable or disable the MLD snooping multicast VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.64.3.4.1.7
swMSMVlanRepSourceAddrType This is the type of multicast VLAN replacement address as specified by object 'swMSMVlanRepSourceAddr'.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.12.64.3.4.1.8
swMSMVlanRepSourceAddr This is the replacement address of this multicast VLAN.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.12.64.3.4.1.9
swMSMVlanRemapPriority This is the priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to -1, the packet's original priority will be used.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.12.64.3.4.1.10
swMSMVlanReplacePriority This specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.64.3.4.1.11
swMSMVlanProfileIDList This specifies a profile ID list for each VLAN ID of the MLD snooping multicast VLAN entry.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.12.64.3.4.1.12
swMSMVlanRowStatus This indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.64.3.4.1.13
swMSMVlanRepSourceAddrActionType This object specifies that swMSMVlanRepSourceAddr is user configured IP address or 'System' interface's IPv6 Link-Local address. This object is 'not-replace', identifies swMSMVlanRepSourceAddr object does not take ef…	Enumerationr/w Enumerated Values: 1 user-configure 2 system-ip 3 not-replace	.1.3.6.1.4.1.171.12.64.3.4.1.14
swMSMVlanRepSourceAddrFromPorts If from is specified, the user need choose the port role on which the replace source IP function will work. The default setting is 'both'. If 'souce_port' is chosen, source IP address of the MLD report/done packet r…	Enumerationr/w Enumerated Values: 1 source-port 2 member-port 3 both	.1.3.6.1.4.1.171.12.64.3.4.1.15
swMSMVlanCustomerVlanID Specify Tthe customer VALN ID carrying in MLD query when QinQ function is enabled. If zero is specified, no customer VLAN ID will be carried in MLD query. The default setting is zero.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.171.12.64.3.4.1.16

This table contains the MLD snooping multicast VLAN
group profile name.

swMSMVlanGroupProfEntry row .1.3.6.1.4.1.171.12.64.3.5.1

This is an entry of the swMSMVlanGroupProfTable.

Indexes

swMSMVlanGroupProfName

Column	Syntax	OID
swMSMVlanGroupProfName This indicates the name of the MLD snooping multicast VLAN group profile.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.12.64.3.5.1.1
swMSMVlanGroupProfID This indicates the index of the MLD snooping multicast VLAN group profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.64.3.5.1.2
swMSMVlanGroupProfStatus This indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.64.3.5.1.3

This table contains the multicast address of each
MLD snooping multicast VLAN group profile.

swMSMVlanGroupProfAddrEntry row .1.3.6.1.4.1.171.12.64.3.6.1

This is an entry of the swMSMVlanGroupProfAddrTable.

Indexes

swMSMVlanGroupProfName swMSMVlanGroupProfAddrType swMSMVlanGroupProfAddrStart swMSMVlanGroupProfAddrEnd

Column	Syntax	OID
swMSMVlanGroupProfAddrType This is the type of multicast address as specified by object 'swMSMVlanGroupProfAddrToIp'.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.12.64.3.6.1.1
swMSMVlanGroupProfAddrStart This specifies the multicast address list for this profile.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.12.64.3.6.1.2
swMSMVlanGroupProfAddrEnd The specifies the multicast address list for this profile.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.12.64.3.6.1.3
swMSMVlanGroupProfAddrStatus This indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.64.3.6.1.4