Standard view Table view

Lannet-Trapsv2-MIB

        SMIv2 definition of p330/P130 traps
Source file
Lannet-Trapsv2-MIB
Last revised
Identity
lntTraps
Base OID
1.3.6.1.4.1.81.38
Imported Objects
APPLIC-MIB lseIntPortCAMLastChange vnsPacketBoxAgentIP vnsPacketDetectedIfName vnsPacketDetectedVLAN vnsPacketExpectedIfName vnsPacketExpectedVLAN vnsPacketIPAddress vnsPacketIPNetMask vnsPacketMACAddress
CONFIG-MIB chHWIntTempThresh chHWIntTempWarning chLntAgIntTemp genGroupBUPSActivityStatus genGroupCascadDownStatus genGroupCascadUpStatus genGroupFaultMask genGroupId genGroupMPSActivityStatus genPortFaultMask genPortFunctionalStatus genPortGroupId genPortId softRedundancyGroupId1 softRedundancyGroupId2 softRedundancyName softRedundancyPortId1 softRedundancyPortId2 softRedundancyStatus
DS1-MIB dsx1LineStatus
GEN-MIB lannet
IF-MIB ifAlias ifName
POLICY-MIB ipPolicyAccessControlViolationDstAddr ipPolicyAccessControlViolationEntID ipPolicyAccessControlViolationEstablished ipPolicyAccessControlViolationIfIndex ipPolicyAccessControlViolationL4DstPort ipPolicyAccessControlViolationL4SrcPort ipPolicyAccessControlViolationProtocol ipPolicyAccessControlViolationRuleType ipPolicyAccessControlViolationSrcAddr ipPolicyAccessControlViolationSubCtxt ipPolicyAccessControlViolationTime ipPolicyActivationEntID ipPolicyActivationifIndex ipPolicyActivationList ipPolicyActivationSubContext ipPolicyControlSlot ipPolicyListID ipPolicyRuleDescription ipPolicyRuleID ipPolicyRuleListID
RFC1213-MIB DisplayString ifAdminStatus ifIndex ifOperStatus ipNetToMediaNetAddress ipNetToMediaPhysAddress
RMON-MIB rmonNotificationGroup
SNMPv2-CONF AGENT-CAPABILITIES NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-MIB authenticationFailure coldStart warmStart
SNMPv2-SMI IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE
XSWITCH-MIB scEthPortFunctionalStatus scEthPortGroupId scEthPortId scGenGroupBUPSFansStatus scGenGroupDot1xSystemMaxNumSupplicant scGenGroupFansStatus scGenLinkAggregationAutoNegResults scGenLinkAggregationFaultMask scGenLinkAggregationFunctionalStatus scGenLinkAggregationId scGenLinkAggregationName scGenLinkAggregationStatus scGenPortDot1xMAC scGenPortGroupId scGenPortId scGenPortLastIntruderSourceAddr scGenSwitchDot1xPortMaxSuppNum
Net-SNMP examples using the avaya MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Lannet-Trapsv2-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Lannet-Trapsv2-MIB::lntTraps'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Lannet-Trapsv2-MIB' -M '/opt/observium/mibs/avaya:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Lannet-Trapsv2-MIB::lntTraps'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (45)
lntTraps
.1.3.6.1.4.1.81.38
lntConfigChangeEvents
.1.3.6.1.4.1.81.38.1
lntConfigChangePrefix
.1.3.6.1.4.1.81.38.1.0
lntCascadeEvents
.1.3.6.1.4.1.81.38.10
lntCascadeFaultsPrefix
.1.3.6.1.4.1.81.38.10.0
lntNotificationGroups
.1.3.6.1.4.1.81.38.10007
lntNotificationAgentCapabilities
.1.3.6.1.4.1.81.38.10008
lntP330L3NotificationAgentCapabilities
.1.3.6.1.4.1.81.38.10008.1
lntP330L2NotificationAgentCapabilities
.1.3.6.1.4.1.81.38.10008.2
lntP130TrapAgentCapabilities
.1.3.6.1.4.1.81.38.10008.3
lntP330MLNotificationAgentCapabilities
.1.3.6.1.4.1.81.38.10008.4
lntG350NotificationAgentCapability
.1.3.6.1.4.1.81.38.10008.5
lntPolicyEvents
.1.3.6.1.4.1.81.38.11
lntPolicyPrefix
.1.3.6.1.4.1.81.38.11.0
lntEthPortFaultEvents
.1.3.6.1.4.1.81.38.12
lntEthPortFaultPrefix
.1.3.6.1.4.1.81.38.12.0
lntSecurityEvents
.1.3.6.1.4.1.81.38.13
lntSecurityPrefix
.1.3.6.1.4.1.81.38.13.0
lntNotificationVarbinds
.1.3.6.1.4.1.81.38.14
lntConfigChangeValue
RFC1213-MIBDisplayString
 .1.3.6.1.4.1.81.38.14.1
lntConfigChangeOID
ObjectIdentifier
 .1.3.6.1.4.1.81.38.14.2
lntUnauthUserName
OctetString
 .1.3.6.1.4.1.81.38.14.3
lntUnauthIpAddress
RFC1155-SMIIpAddress
 .1.3.6.1.4.1.81.38.14.4
lntUnauthProtocol
Enumeration
 .1.3.6.1.4.1.81.38.14.5
lntSCPStrictCheckingMode
Enumeration
 .1.3.6.1.4.1.81.38.14.6
lntLicenseErrorCodes
Enumeration
 .1.3.6.1.4.1.81.38.14.7
scGenPortDot1xFailureString
RFC1213-MIBDisplayString
 .1.3.6.1.4.1.81.38.14.8
lntWanEvents
.1.3.6.1.4.1.81.38.15
lntWanPrefix
.1.3.6.1.4.1.81.38.15.0
lntSWRedundancyEvents
.1.3.6.1.4.1.81.38.2
lntSWRedundancyPrefix
.1.3.6.1.4.1.81.38.2.0
lntTempratureEvents
.1.3.6.1.4.1.81.38.3
lntTempratureWarningPrefix
.1.3.6.1.4.1.81.38.3.0
lntCAMChangeEvents
.1.3.6.1.4.1.81.38.4
lntCAMChangePrefix
.1.3.6.1.4.1.81.38.4.0
lntPSUEvents
.1.3.6.1.4.1.81.38.5
lntPSUPrefix
.1.3.6.1.4.1.81.38.5.0
lntL3Events
.1.3.6.1.4.1.81.38.6
lntL3FaultsPrefix
.1.3.6.1.4.1.81.38.6.0
lntLinkEvents
.1.3.6.1.4.1.81.38.7
lntLinkEventsPrefix
.1.3.6.1.4.1.81.38.7.0
lntLAGEvents
.1.3.6.1.4.1.81.38.8
lntLAGPrefix
.1.3.6.1.4.1.81.38.8.0
lntFansEvents
.1.3.6.1.4.1.81.38.9
lntFansPrefix
.1.3.6.1.4.1.81.38.9.0
Dependencies (19) 12 direct · 7 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. RFC1155-SMIrfc
  2. GEN-MIBavaya
  3. RFC-1212rfc
  4. SNMPv2-SMIrfc
  5. SNMPv2-TCrfc
  6. IANAifType-MIBrfc
  7. RFC1213-MIBrfc
  8. SNMPv2-CONFrfc
  9. RMON-MIBrfc
  10. APPLIC-MIBavaya
  11. CONFIG-MIBavaya
  12. SNMPv2-MIBrfc
  13. IF-MIBrfc
  14. PerfHist-TC-MIBrfc
  15. DS1-MIBrfc
  16. POLICY-MIBavaya
  17. SNMP-FRAMEWORK-MIBrfc
  18. IEEE8021-PAE-MIBrfc
  19. XSWITCH-MIBavaya
  20. Lannet-Trapsv2-MIBavayaselected
Conformance Groups (15)
lntConfigChangeVarbinds
lntConfigChangeValue lntConfigChangeOID lntUnauthIpAddress lntUnauthUserName lntLicenseErrorCodes lntSCPStrictCheckingMode lntUnauthProtocol
varbinds related with config change trap
 .1.3.6.1.4.1.81.38.10007.1
lntLagNotificationGroup
lntLAGConnLostFlt lntLAGConnLostOk lntLAGPartialConnLostFlt lntLAGPartialConnLostOk lntLAGAutoNegFlt lntLAGAutoNegOk lntLAGDeleteEvent lntLAGCreateEvent
Group of Link aggregation traps
 .1.3.6.1.4.1.81.38.10007.5
lntSWRedundancyNotificationGroup
lntSoftRedDelEvent lntSoftRedNewEvent
Group of Software Redundancy traps
 .1.3.6.1.4.1.81.38.10007.6
lntPSUFaultNotificationGroup
lntMainPSUFlt lntMainPSUOk lntBackupPSUFlt lntBackupPSUOk
PSU related fault traps (main and backup)
 .1.3.6.1.4.1.81.38.10007.7
lntTempratureNotificationGroup
lntTempratureOk lntTempratureWarning
Temperature warning related traps
 .1.3.6.1.4.1.81.38.10007.8
lntL3FaultNotificationGroup
lntDuplicateIPFlt lntVLANViolationEvent lntARPViolationEvent
Group of L3 fault traps
 .1.3.6.1.4.1.81.38.10007.9
lntLinkDownNotificationGroup
lntPortLinkDownEvent lntPortLinkUpEvent lntVPortLinkDownEvent lntVPortLinkUpEvent
Link Down/Up traps
 .1.3.6.1.4.1.81.38.10007.10
lntCascadeNotificationGroup
lntCascadUpConnFlt lntCascadUpConnOk lntCascadDownConnOk lntCascadDownConnFlt
Cascade fault traps
 .1.3.6.1.4.1.81.38.10007.11
lntEthPortNotificationGroup
lntPortFEFlt lntPortFEOk lntVPortFEFlt lntVPortFEOk lntPortAutoPartFlt lntPortAutoPartOk lntVPortAutoPartFlt lntVPortAutoPartOK lntEthVPortAutoNegotiationOK lntEthPortAutoNegotiationOK lntEthPortAutoNegotiationFlt lntEthVPortAutoNegotiationFlt lntPortInlinePowerFlt lntPortInlinePowerOK
Eth port fault traps
 .1.3.6.1.4.1.81.38.10007.12
lntCAMNotificationGroup obsolete
lntPortCAMLastChange
CAM change related traps
 .1.3.6.1.4.1.81.38.10007.13
lntConfigChangeNotificationGroup
lntConfigChangeEvent lntStackMasterReelection
Configuration change related traps
 .1.3.6.1.4.1.81.38.10007.14
lntPolicyNotificationGroup
lntPolicyAccessControlListLvlRuleTrap lntPolicyAccessControlViolationFlt lntPolicyChangeEvent
policy related traps
 .1.3.6.1.4.1.81.38.10007.15
lntFansNotificationGroup
lntBackupFansFlt lntBackupFansOK lntMainFansFlt lntMainFansOK
Notifications related with FAN problems
 .1.3.6.1.4.1.81.38.10007.16
lntSecurityNotificationGroup
lntAccountLockoutEvent lntMACSecurityEvent lntUnAuthAccessEvent lntUnknownHostCopyEvent lntLicenseStartupValidationFlt lntLicenseDownloadValidationFlt
Description.
 .1.3.6.1.4.1.81.38.10007.17
lntWanNotificationGroup
lntWanPhysicalAlarmOn lntWanPhysicalAlarmOff lntWanLocalAlarmOn lntWanLocalAlarmOff lntWanRemoteAlarmOn lntWanRemoteAlarmOff lntWanMinorAlarmOn lntWanMinorAlarmOff
Description.
 .1.3.6.1.4.1.81.38.10007.18
Notifications / Traps (69)
NameOIDDescription
lntConfigChangeEvent
lntConfigChangeOID lntConfigChangeValue
.1.3.6.1.4.1.81.38.1.0.1
Notification generated in case of configuration change.
List of events triggering notitication is TBD
lntStackMasterReelection
CONFIG-MIBgenGroupId
.1.3.6.1.4.1.81.38.1.0.82
The trap should be triggered in an event that an election process
leads to selection of a different module as a Stack Master
lntCascadUpConnFlt
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId CONFIG-MIBgenGroupCascadUpStatus
.1.3.6.1.4.1.81.38.10.0.2315
The trap reports on a cascading up connection lost.
It is sent when genGroupCascadUpStatus changed to rld(2).
lntCascadUpConnOk
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId CONFIG-MIBgenGroupCascadUpStatus
.1.3.6.1.4.1.81.38.10.0.2316
The trap reports that the cascading up connection lost
was cleared. It is sent when genGroupCascadUpStatus changed from rld(2) to ok(1).
lntCascadDownConnFlt
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId CONFIG-MIBgenGroupCascadDownStatus
.1.3.6.1.4.1.81.38.10.0.2317
The trap reports on a cascading down connection lost.
It is sent when genGroupCascadDownStatus changed to rld(2).
lntCascadDownConnOk
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId CONFIG-MIBgenGroupCascadDownStatus
.1.3.6.1.4.1.81.38.10.0.2318
The trap reports that the cascading down connection lost
was cleared. It is sent when genGroupCascadDownStatus
changed from rld(2) to ok(1).
lntPolicyChangeEvent
POLICY-MIBipPolicyActivationEntID POLICY-MIBipPolicyActivationList POLICY-MIBipPolicyActivationifIndex POLICY-MIBipPolicyActivationSubContext
.1.3.6.1.4.1.81.38.11.0.60
The trap reports a change in the active list specific for a
policy-enabled box or module
lntPolicyAccessControlListLvlRuleTrap
POLICY-MIBipPolicyAccessControlViolationEntID POLICY-MIBipPolicyAccessControlViolationSrcAddr POLICY-MIBipPolicyAccessControlViolationDstAddr POLICY-MIBipPolicyAccessControlViolationProtocol POLICY-MIBipPolicyAccessControlViolationL4SrcPort POLICY-MIBipPolicyAccessControlViolationL4DstPort POLICY-MIBipPolicyAccessControlViolationEstablished POLICY-MIBipPolicyAccessControlViolationRuleType POLICY-MIBipPolicyListID POLICY-MIBipPolicyAccessControlViolationIfIndex POLICY-MIBipPolicyAccessControlViolationSubCtxt POLICY-MIBipPolicyAccessControlViolationTime
.1.3.6.1.4.1.81.38.11.0.62
This trap reports to the Management station when a list-level
Policy rule (e.g., ipPolicyListIpOptionOperation)
specifies an operation that includes a 'notify' action.
The trap includes in its varbind information about:
- The entity (slot) where the event occurred,
- The type of the list-level rule that was matched,
- The quintuplet that identifies the matching packet.
- The policy interface on which the event occurred.
- The policy interface sub-context (e.g., the direction)
- sysUpTime at the time the event occured.
A management application would display this trap and the relevant
information in a log entry.
This trap will not be sent at intervals smaller than one
minute for identical information in the varbinds list variables.
lntPolicyAccessControlViolationFlt
POLICY-MIBipPolicyAccessControlViolationEntID POLICY-MIBipPolicyAccessControlViolationSrcAddr POLICY-MIBipPolicyAccessControlViolationDstAddr POLICY-MIBipPolicyAccessControlViolationProtocol POLICY-MIBipPolicyAccessControlViolationL4SrcPort POLICY-MIBipPolicyAccessControlViolationL4DstPort POLICY-MIBipPolicyAccessControlViolationEstablished POLICY-MIBipPolicyRuleID POLICY-MIBipPolicyRuleListID POLICY-MIBipPolicyAccessControlViolationIfIndex POLICY-MIBipPolicyAccessControlViolationSubCtxt POLICY-MIBipPolicyAccessControlViolationTime POLICY-MIBipPolicyRuleDescription
.1.3.6.1.4.1.81.38.11.0.64
This trap reports to the Management station on IP PolicyAccess Control violation.
The trap includes in its varbind information about the slot where the event occurred,
The id of the rule that was violated in the current rules table,
and the quintuplet that identifies the faulty packet.
A management application would display this trap and the relevant information in a log entry.
This trap will not be sent at intervals smaller than one minute for identical information in the
varbinds list variables
lntEthPortAutoNegotiationFlt
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3001
The port recovered from a previously reported
connectivity problem. (Bit 4 in the genPortFaultMask set to off,
scEthPortAutoNegotiationStatus = ok)
lntEthPortAutoNegotiationOK
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3002
The port recovered from a previously reported
connectivity problem. (Bit 4 in the genPortFaultMask set to off,
scEthPortAutoNegotiationStatus = ok)
lntPortFEFlt
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3005
The port hardware detects a loss of connectivity
reported by the remote extremity of the link connected to
the port. This indication shows that though the cabling is
at least partially operative, the information transmitted
through the port may not arrive in all its integrity at the
other side of the link. It is recommended that the network
administrator check the link in order to detect the origin
of the problem and prevent its aggravation.
(Bit 10 in the genPortFaultMask set to on)
lntPortFEOk
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3006
A previously detected problem in the integrity of the link,
reported by the remote link circuitry was solved.
(Bit 10 in the genPortFaultMask set to off,
scEthPortFunctionalStatus = ok(1))
lntVPortFEFlt
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3015
The valuable port hardware detects a loss of connectivity
reported by the remote extremity of the link connected to
the port. This indication shows that though the cabling is
at least partially operative, the information transmitted
through the port may not arrive in all its integrity at the
other side of the link. It is recommended that the network
administrator check the link in order to detect the origin
of the problem and prevent its aggravation.
(Bit 10 in the genPortFaultMask set to on,
scEthPortFunctionalStatus = fail(2))
lntVPortFEOk
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3016
A previously detected problem in the integrity of the link
to a valuable port, reported by the remote
link circuitry was solved.
(Bit 10 in the genPortFaultMask set to off,
scEthPortFunctionalStatus = ok(1))
lntPortAutoPartFlt
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3023
The port on the module reports the activation of the auto
partition mechanism. This event means that an excessive
number of errors occurred on the port, and the port is
disconnected from the repeater or switch unit. The network
administrator should check the segment and/or end stations
connected to the port for hardware or misconfiguration problems.
(Bit 1 in the genPortFaultMask set to on,
genPortFunctionalStatus = partition(8))
lntPortAutoPartOk
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3024
The port recovered from a previously reported auto
partition fault.
(Bit 1 in the genPortFaultMask set to off,
genPortFunctionalStatus = ok)
lntVPortAutoPartFlt
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3025
The valuable port on the module reports the activation of the
autopartition mechanism. This event means that an
excessive number of errors occurred on the port, and the
port is disconnected from the repeater or switch unit. The
network administrator should check the segment and/or end
stations connected to the port for hardware or
misconfiguration problems.
(Bit 1 in the genPortFaultMask set to on,
genPortFunctionalStatus = partition(8))
lntVPortAutoPartOK
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3026
The valuable port recovered from a previously
reported auto partition fault.
(Bit 1 in the genPortFaultMask set to off,
genPortFunctionalStatus = ok)
lntEthVPortAutoNegotiationFlt
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3031
The valuable port hardware detects the lack of a connection
to an end station or to another hub or switch. While this
is may not be necessarily a fault condition, the network
administrator's attention is recommended, because the port
was defined as a port.
(Bit 4 in the genPortFaultMask set to on,
scEthPortAutoNegotiationStatus = fail(2))
lntEthVPortAutoNegotiationOK
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3032
The port hardware detects the lack of a connection
to an end station or to another hub or switch. While this
is may not be necessarily a fault condition, the network
administrator's attention is recommended, because the port
was defined as a valuable port.
(Bit 4 in the genPortFaultMask set to on,
scEthPortAutoNegotiationStatus = fail(2))
lntPortInlinePowerFlt
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3933
The Inline Power (Power-over-Ethernet) port hardware reports that the PD (Powered device)
connected to that port is not receiving Inline Power due to a fault condition.
(Bit 37 in the genPortFaultMask set to on,
pethPsePortDetectionStatus = fault(4) or otherfault(6))
lntPortInlinePowerOK
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.12.0.3934
The Inline Power (Power-over-Ethernet) port hardware reports that the PD (Powered device)
connected to that port is not in a fault condition. It may or not be delievering Inline Power
to the PD.
(Bit 37 in the genPortFaultMask set to on,
pethPsePortDetectionStatus = fault(4) or otherfault(6))
lntUnknownHostCopyEvent
lntUnauthUserName lntUnauthIpAddress lntSCPStrictCheckingMode
.1.3.6.1.4.1.81.38.13.0.1002
Event generated on attempt to accomplish download/upload file
transfer using SCP/SFTP protocol to unknown host.
lntAccountLockoutEvent
lntUnauthUserName lntUnauthIpAddress lntUnauthProtocol
.1.3.6.1.4.1.81.38.13.0.1003
After configurable number of failed attempts to authenticate a user, device
penalized by locking them out for a pre-specified amount of time.
lntLicenseStartupValidationFlt
lntLicenseErrorCodes
.1.3.6.1.4.1.81.38.13.0.1004
At start-up, the product validates the license file
scheme and the license signature. On inconsistency the product
issues this tarp and then returns to the factory-default feature activation
settings.
lntLicenseDownloadValidationFlt
lntLicenseErrorCodes
.1.3.6.1.4.1.81.38.13.0.1005
During the license file download, the product validates the license file
scheme and the license signature. On inconsistency the product
aborts download process, sends this notification and
stay with the existing feature activation settings
lntDot1xMaxAuthRateReachedEvent
XSWITCH-MIBscGenPortGroupId
.1.3.6.1.4.1.81.38.13.0.1006
This trap notifies the management station that maximum rate of 802.1x
authentications has been reached in module $1 .
lntDot1xAuthFailureEvent
XSWITCH-MIBscGenPortDot1xMAC XSWITCH-MIBscGenPortGroupId XSWITCH-MIBscGenPortId scGenPortDot1xFailureString
.1.3.6.1.4.1.81.38.13.0.1007
This trap notifies the management station that device with MAC address
$1 failed to authenticate module/port $2/$3 due to $4
lntDot1xMaxAuthModuleNumReachedEvent
XSWITCH-MIBscGenGroupDot1xSystemMaxNumSupplicant XSWITCH-MIBscGenPortGroupId
.1.3.6.1.4.1.81.38.13.0.1008
This trap notifies the management station that Authentication denied due to
maximum number of authentication of 802.1x $1 per module $2 has been reached.
lntDot1xMaxAuthPortNumReachedEvent
XSWITCH-MIBscGenSwitchDot1xPortMaxSuppNum XSWITCH-MIBscGenPortGroupId XSWITCH-MIBscGenPortId
.1.3.6.1.4.1.81.38.13.0.1009
This trap notifies the management station that Authentication denied due to
maximum number of authentication of 802.1x $1 per module/port $2/$3 has been reached.
lntMACSecurityEvent
XSWITCH-MIBscGenPortLastIntruderSourceAddr XSWITCH-MIBscGenPortGroupId XSWITCH-MIBscGenPortId
.1.3.6.1.4.1.81.38.13.0.104
This trap notifies the management station of the security violation.
It gives the slot number of the board, the port on the board and the
source MAC address extracted from the frame that has violated
the security policy. The slot and the port numbers, genPortGroupId
and genPortId respectively, define an instance of the appropriate
source address.For the ring security violation the trap contains the ring ID and the
intruder's MAC address. The trap was previously assigned the specific number 11.
lntUnAuthAccessEvent
lntUnauthUserName lntUnauthIpAddress lntUnauthProtocol
.1.3.6.1.4.1.81.38.13.0.68
Notification on unauthorized login attempts.
o For CLI and SNMP login failures:
Both SNMP SSH and WEB management interfaces shall identify
situation and alert.
The reported information should include wrong user name,
host name and IP address of remote host. Passwords is not
reported because of the possibility to reveal password.
o For pre-shared-key (PSK) authentication failure in IKE:
* lntUnauthUserName -
- In IKE AM: the ID sent by the remote peer in the ID
payload.
- In IKE MM: the ID associated with the remote peer IP
in the running configuration.
* lntUnauthIpAddress - the source IP of the packet sent
by the remote peer.
* lntUnauthProtocol - lntIKEAccess(500)
lntWanPhysicalAlarmOn
RFC1213-MIBifIndex RFC1213-MIBifAdminStatus RFC1213-MIBifOperStatus IF-MIBifName IF-MIBifAlias DS1-MIBdsx1LineStatus
.1.3.6.1.4.1.81.38.15.0.30
Description.
lntWanPhysicalAlarmOff
RFC1213-MIBifIndex RFC1213-MIBifAdminStatus RFC1213-MIBifOperStatus IF-MIBifName IF-MIBifAlias DS1-MIBdsx1LineStatus
.1.3.6.1.4.1.81.38.15.0.31
Description.
lntWanLocalAlarmOn
RFC1213-MIBifIndex RFC1213-MIBifAdminStatus RFC1213-MIBifOperStatus IF-MIBifName IF-MIBifAlias DS1-MIBdsx1LineStatus
.1.3.6.1.4.1.81.38.15.0.32
Description.
lntWanLocalAlarmOff
RFC1213-MIBifIndex RFC1213-MIBifAdminStatus RFC1213-MIBifOperStatus IF-MIBifName IF-MIBifAlias DS1-MIBdsx1LineStatus
.1.3.6.1.4.1.81.38.15.0.33
Description.
lntWanRemoteAlarmOn
RFC1213-MIBifIndex RFC1213-MIBifAdminStatus RFC1213-MIBifOperStatus IF-MIBifName IF-MIBifAlias DS1-MIBdsx1LineStatus
.1.3.6.1.4.1.81.38.15.0.34
Description.
lntWanRemoteAlarmOff
RFC1213-MIBifIndex RFC1213-MIBifAdminStatus RFC1213-MIBifOperStatus IF-MIBifName IF-MIBifAlias DS1-MIBdsx1LineStatus
.1.3.6.1.4.1.81.38.15.0.35
Description.
lntWanMinorAlarmOn
RFC1213-MIBifIndex RFC1213-MIBifAdminStatus RFC1213-MIBifOperStatus IF-MIBifName IF-MIBifAlias DS1-MIBdsx1LineStatus
.1.3.6.1.4.1.81.38.15.0.36
Description.
lntWanMinorAlarmOff
RFC1213-MIBifIndex RFC1213-MIBifAdminStatus RFC1213-MIBifOperStatus IF-MIBifName IF-MIBifAlias DS1-MIBdsx1LineStatus
.1.3.6.1.4.1.81.38.15.0.37
Description.
lntSoftRedDelEvent
CONFIG-MIBsoftRedundancyStatus
.1.3.6.1.4.1.81.38.2.0.12
The trap notifies the manager of the deletion of the specified
redundant link, which is identified by the softRedundancyId.
lntSoftRedNewEvent
CONFIG-MIBsoftRedundancyName CONFIG-MIBsoftRedundancyGroupId1 CONFIG-MIBsoftRedundancyPortId1 CONFIG-MIBsoftRedundancyGroupId2 CONFIG-MIBsoftRedundancyPortId2 CONFIG-MIBsoftRedundancyStatus
.1.3.6.1.4.1.81.38.2.0.13
The trap is generated on the creation of the redundant links for the
specified ports. It gives the logical name of the redundant link the
identification of the main and secondary ports and the status of the
link. The softRedundancyId defines the instances of the above-
mentioned variables.
lntTempratureWarning
CONFIG-MIBchHWIntTempWarning CONFIG-MIBchHWIntTempThresh CONFIG-MIBchLntAgIntTemp
.1.3.6.1.4.1.81.38.3.0.14
This trap notifies the management station of the internal
board/enclosure temperature fluctuations. It is generated when
the temperature exceeds the threshold chHWIntTempThresh.
lntTempratureOk
CONFIG-MIBchHWIntTempWarning CONFIG-MIBchHWIntTempThresh CONFIG-MIBchLntAgIntTemp
.1.3.6.1.4.1.81.38.3.0.23
This trap notifies the management station that the internal
board/enclosure temperature fluctuations situation is back to normal.
lntPortCAMLastChange obsolete
APPLIC-MIBlseIntPortCAMLastChange
.1.3.6.1.4.1.81.38.4.0.22
This trap reports of the occurred CAM changes
lntMainPSUFlt
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId CONFIG-MIBgenGroupMPSActivityStatus
.1.3.6.1.4.1.81.38.5.0.2303
An error was reported concerning the Main Power Supply.
Urgent intervention is required by the network administrator
in order to replace the faulty module, or take any other
necessary measures in order to ensure the uninterrupted
operation of the network
lntMainPSUOk
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId CONFIG-MIBgenGroupMPSActivityStatus
.1.3.6.1.4.1.81.38.5.0.2304
The network device recovered after a previously reported problem
in the operation of the box Main Power Supply
lntBackupPSUFlt
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId CONFIG-MIBgenGroupBUPSActivityStatus
.1.3.6.1.4.1.81.38.5.0.2305
An error was reported concerning the Backup Power Supply.
Urgent intervention is required by the network
administrator in order to replace the faulty module, or
take any other necessary measures in order to ensure the
uninterrupted operation of the network.
lntBackupPSUOk
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId CONFIG-MIBgenGroupMPSActivityStatus
.1.3.6.1.4.1.81.38.5.0.2306
The network device recovered after a previously reported problem
in the operation of the box Backup Power Supply.
lntDuplicateIPFlt
RFC1213-MIBipNetToMediaPhysAddress RFC1213-MIBipNetToMediaNetAddress
.1.3.6.1.4.1.81.38.6.0.27
This trap reports to the Management station on Duplicate IP
identification. CRP identify the new IP on the network.
If it similar to one of its IP interfaces, the CRP will issue a
SNMP trap, containing the MAC of the intruder.
lntVLANViolationEvent
APPLIC-MIBvnsPacketMACAddress APPLIC-MIBvnsPacketIPAddress APPLIC-MIBvnsPacketIPNetMask APPLIC-MIBvnsPacketExpectedVLAN APPLIC-MIBvnsPacketDetectedVLAN APPLIC-MIBvnsPacketBoxAgentIP
.1.3.6.1.4.1.81.38.6.0.28
This trap reports to the Management station on IP VLAN violation.
CRP verify the VLAN of the incoming packets. If there is any
inconsistency between the configured VLAN and the VLAN number
found in the IP packet, the CRP will issue a SNMP trap.
lntARPViolationEvent
APPLIC-MIBvnsPacketMACAddress APPLIC-MIBvnsPacketIPAddress APPLIC-MIBvnsPacketIPNetMask APPLIC-MIBvnsPacketExpectedVLAN APPLIC-MIBvnsPacketDetectedVLAN APPLIC-MIBvnsPacketBoxAgentIP APPLIC-MIBvnsPacketExpectedIfName APPLIC-MIBvnsPacketDetectedIfName
.1.3.6.1.4.1.81.38.6.0.70
This trap reports to the Management station when a Sourec IP in an
ARP response does not match the subnets configured on the router
interface through which it has been received.
The trap returns details of the offending packet, as welll as the
expected vs. detected VLAN IDs and interface Names
lntPortLinkDownEvent
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.7.0.3039
The port hardware detects loss of connectivity to
an end station or to another hub or switch. This is not
necessarily a fault condition, as the same signaling is
reported by the port hardware in usual operational cases,
for example, of a non-critical station being
disconnected or turned off at the end of the work day.
(Bit 7 in the genPortFaultMask set to on, genPortFunctionalStatus = rld(2)
)
lntPortLinkUpEvent
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.7.0.3040
The port recovered from a previously reported
connectivity problem.
(Bit 7 in the genPortFaultMask set to off,
genPortFunctionalStatus = ok)
lntVPortLinkDownEvent
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.7.0.3041
The port hardware detects the lack of a connection
to an end station or to another hub or switch. While this
may not be necessarily a fault condition, the network
administrator's attention is recommended, because the port
was defined as a valuable port. (Bit 7 in the genPortFaultMask set
to on, genPortFunctionalStatus = rld(2))
lntVPortLinkUpEvent
CONFIG-MIBgenPortFaultMask CONFIG-MIBgenPortGroupId CONFIG-MIBgenPortId
.1.3.6.1.4.1.81.38.7.0.3042
Acknowledegs link up condition on a valuable port.
(Bit 7 in the genPortFaultMask set to off,
genPortFunctionalStatus = ok)
lntLAGConnLostFlt
XSWITCH-MIBscGenLinkAggregationFaultMask XSWITCH-MIBscGenLinkAggregationId XSWITCH-MIBscGenLinkAggregationName XSWITCH-MIBscGenLinkAggregationFunctionalStatus
.1.3.6.1.4.1.81.38.8.0.44
The trap reports on a LAG connection lost. It is sent when
scGenLinkAggregationFunctionalStatus changed to fail (2).
lntLAGConnLostOk
XSWITCH-MIBscGenLinkAggregationFaultMask XSWITCH-MIBscGenLinkAggregationId XSWITCH-MIBscGenLinkAggregationName XSWITCH-MIBscGenLinkAggregationFunctionalStatus
.1.3.6.1.4.1.81.38.8.0.46
The trap reports that the LAG connection lost was cleared.
It is sent when scGenLinkAggregationFunctionalStatus changed
from fail(2) to to ok(1).
lntLAGPartialConnLostFlt
XSWITCH-MIBscGenLinkAggregationFaultMask XSWITCH-MIBscGenLinkAggregationId XSWITCH-MIBscGenLinkAggregationName XSWITCH-MIBscGenLinkAggregationFunctionalStatus
.1.3.6.1.4.1.81.38.8.0.48
The trap reports on a LAG partial connection, where some of the ports
are in fault but some are ok. It is sent when
scGenLinkAggregationFunctionalStatus changed to partialFail (3).
lntLAGPartialConnLostOk
XSWITCH-MIBscGenLinkAggregationFaultMask XSWITCH-MIBscGenLinkAggregationId XSWITCH-MIBscGenLinkAggregationName XSWITCH-MIBscGenLinkAggregationFunctionalStatus
.1.3.6.1.4.1.81.38.8.0.50
The trap reports that the LAG partial connection was cleared.
It is sent when scGenLinkAggregationFunctionalStatus
changed from partialFail (3)to to ok(1).
lntLAGAutoNegFlt
XSWITCH-MIBscGenLinkAggregationFaultMask XSWITCH-MIBscGenLinkAggregationId XSWITCH-MIBscGenLinkAggregationName XSWITCH-MIBscGenLinkAggregationAutoNegResults
.1.3.6.1.4.1.81.38.8.0.52
The trap reports on a auto-negotiation results on the LAG ports.
It is sent when scGenLinkAggregationAutoNegResults
changed to autoNegInconsistantResults (2).
lntLAGAutoNegOk
XSWITCH-MIBscGenLinkAggregationFaultMask XSWITCH-MIBscGenLinkAggregationId XSWITCH-MIBscGenLinkAggregationName XSWITCH-MIBscGenLinkAggregationAutoNegResults
.1.3.6.1.4.1.81.38.8.0.54
The trap reports that the auto-negotiation results on the LAG ports was cleared.
It is sent when this trap is enabled and when scGenLinkAggregationAutoNegResults
changed to ok(1).
lntLAGDeleteEvent
XSWITCH-MIBscGenLinkAggregationId XSWITCH-MIBscGenLinkAggregationName XSWITCH-MIBscGenLinkAggregationStatus
.1.3.6.1.4.1.81.38.8.0.56
The trap notifies the manager of the deletion of the specified LAG,
which is identified by the scGenLinkAggregationId.
lntLAGCreateEvent
XSWITCH-MIBscGenLinkAggregationId XSWITCH-MIBscGenLinkAggregationName XSWITCH-MIBscGenLinkAggregationStatus
.1.3.6.1.4.1.81.38.8.0.58
The trap is generated on the creation of a new LAG,
which is identified by the scGenLinkAggregationId.
lntMainFansFlt
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId XSWITCH-MIBscGenGroupFansStatus
.1.3.6.1.4.1.81.38.9.0.2307
The trap reports the failure of one (or more)
module's Fan. It is sent when scGenGroupFansStatus changed
to oneFanFailed(2)
lntMainFansOK
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId XSWITCH-MIBscGenGroupFansStatus
.1.3.6.1.4.1.81.38.9.0.2308
The trap reports that the module's Fan failure
was cleared. It is sent when this trap is
enabled and when scGenGroupFansStatus changed
from oneFanFailed(2) to allFansOK(1).
lntBackupFansFlt
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId XSWITCH-MIBscGenGroupBUPSFansStatus
.1.3.6.1.4.1.81.38.9.0.2309
The trap reports the failure of one
(or more) BUPS module's Fan. It is sent when
scGenGroupBUPSFansStatus changed to
oneFanFailed(2).
lntBackupFansOK
CONFIG-MIBgenGroupFaultMask CONFIG-MIBgenGroupId XSWITCH-MIBscGenGroupBUPSFansStatus
.1.3.6.1.4.1.81.38.9.0.2310
The trap reports that the BUPS module's Fan
failure was cleared. It is sent when this trap is
enabled and when scGenGroupBUPSFansStatus changed
from oneFanFailed(2) to allFansOK(1).