Lambdatrail2s-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
53

lt2sMgmtPortTable

table
.1.3.6.1.4.1.35616.5.1.26 · 1 row entry · 20 columns
Open in standard view
Uses the deltanet variant from /opt/observium/mibs/deltanet.
Command help
Walk lt2sMgmtPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Lambdatrail2s-MIB' -M '/opt/observium/mibs/deltanet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Lambdatrail2s-MIB::lt2sMgmtPortTable' 
A list of management port entries.
lt2sMgmtPortEntry row .1.3.6.1.4.1.35616.5.1.26.1
An entry containing information applicable to
the management ports.
Indexes
Column Syntax OID
lt2sMgmtPortId
The management port identification.
1 Inband SFP, 2 LAN1, 3 LAN2.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.35616.5.1.26.1.1
lt2sMgmtPortName
The name of the management port
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.35616.5.1.26.1.2
lt2sMgmtPortEnable
The enabled state of the port.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.35616.5.1.26.1.3
lt2sMgmtPortLink
The link state of the management port.
Enumeration
Enumerated Values:
1down
2up
3notAvailable
 .1.3.6.1.4.1.35616.5.1.26.1.4
lt2sMgmtPortSpeed
The speed mode of the port.
Enumeration
Enumerated Values:
1full1000
2full100
3half100
4full10
5half10
6notAvailable
 .1.3.6.1.4.1.35616.5.1.26.1.5
lt2sMgmtPortTxBytes
The total amount of sent bytes.
sent BytesInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.35616.5.1.26.1.6
lt2sMgmtPortRxBytes
The total amount of received bytes.
sent BytesInteger32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.35616.5.1.26.1.7
lt2sMgmtSfpPlugged
The line SFP plugged state of the port.
Enumeration
Enumerated Values:
1removed
2inserted
3notAvailable
 .1.3.6.1.4.1.35616.5.1.26.1.8
lt2sMgmtSfpVendor
The vendor name of the SFP.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.35616.5.1.26.1.9
lt2sMgmtSfpType
The vendor part name of the SFP.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.35616.5.1.26.1.10
lt2sMgmtSfpSerial
The serial number of the SFP.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.35616.5.1.26.1.11
lt2sMgmtSfpWavelength
The SFP wavelength of the port. If the SFP
is removed the object contains 'NA'.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.35616.5.1.26.1.12
lt2sMgmtSfpTxPower
The SFP transmit power of the port. If the SFP
is removed, the value is -1.
0.001 dBmInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.1.26.1.13
lt2sMgmtSfpRxPower
The SFP receive power of the port. If the SFP
is removed, the value is -1.
0.001 dBmInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.1.26.1.14
lt2sMgmtSfpLaserTemp
The internal temperature of the SFP. If the SFP
is removed, the value is -1.
0.01 degrees CelsiusInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.1.26.1.15
lt2sMgmtSfpLaserBias
The SFP laser bias in milli ampere. If the SFP
is removed, the value is -1.
0.001 AmpereInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.1.26.1.16
lt2sMgmtSfpTxLow
The SFP laser TX low threshold in dBm.
dBmInteger32r/w
Constraints:
range: -10-2
 .1.3.6.1.4.1.35616.5.1.26.1.17
lt2sMgmtSfpTxHigh
The SFP laser TX high threshold in dBm.
dBmInteger32r/w
Constraints:
range: -4-8
 .1.3.6.1.4.1.35616.5.1.26.1.18
lt2sMgmtSfpRxLow
The SFP laser RX low threshold in dBm.
dBmInteger32r/w
Constraints:
range: -30-0
 .1.3.6.1.4.1.35616.5.1.26.1.19
lt2sMgmtSfpRxHigh
The SFP laser RX high threshold in dBm.
dBmInteger32r/w
Constraints:
range: -12-6
 .1.3.6.1.4.1.35616.5.1.26.1.20

lt2sPortTable

table
.1.3.6.1.4.1.35616.5.3.1 · 1 row entry · 33 columns
Open in standard view
Uses the deltanet variant from /opt/observium/mibs/deltanet.
Command help
Walk lt2sPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Lambdatrail2s-MIB' -M '/opt/observium/mibs/deltanet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Lambdatrail2s-MIB::lt2sPortTable' 
A list of port table entries.
lt2sPortEntry row .1.3.6.1.4.1.35616.5.3.1.1
An entry containing information applicable to a
particular port.
Indexes
Column Syntax OID
lt2sPortId
A unique value for each port.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.35616.5.3.1.1.1
lt2sPortEnable
The status of the port.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.35616.5.3.1.1.2
lt2sPortApsd
The automatic power shut down configuration of the port.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.35616.5.3.1.1.3
lt2sPortSpeed
The speed mode of the port.
Enumerationr/w
Enumerated Values:
1transparent
2speed10g
3speed8g
4speed16g
 .1.3.6.1.4.1.35616.5.3.1.1.4
lt2sPortReset
Reset the port.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.35616.5.3.1.1.5
lt2sPortLoop
Set Loop on chosen port.
Enumerationr/w
Enumerated Values:
1off
2line
3client
 .1.3.6.1.4.1.35616.5.3.1.1.6
lt2sPortName
The name of the port.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.35616.5.3.1.1.7
lt2sLinePlugged
The line SFP plugged state of the port.
Enumeration
Enumerated Values:
1notPlugged
2plugged
3notAvailable
 .1.3.6.1.4.1.35616.5.3.1.1.8
lt2sLineLink
The line SFP link state of the port.
Enumeration
Enumerated Values:
1down
2up
3notAvailable
 .1.3.6.1.4.1.35616.5.3.1.1.9
lt2sLineApsd
The automatic power shut down state of the line port.
Enumeration
Enumerated Values:
1no
2yes
3disabled
4notAvailable
 .1.3.6.1.4.1.35616.5.3.1.1.10
lt2sLineType
The line SFP type of the port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.35616.5.3.1.1.11
lt2sLineWavelength
The line SFP wavelength of the port. If the line SFP is not
plugged in, the object should contain the value of 'NA'.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.35616.5.3.1.1.12
lt2sLineTxPower
The line SFP transmit power of the port. If the line SFP
is not plugged in, the object should contain the value of -1.
0.001 dBmInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.3.1.1.13
lt2sLineRxPower
The line SFP receive power of the port. If the line SFP
is not plugged in, the object should contain the value of -1.
0.001 dBmInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.3.1.1.14
lt2sLineLaserTemp
The line SFP laser temperature of the port. If the line SFP
is not plugged in, the object should contain the value of -1.
degrees CentigradeInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.3.1.1.15
lt2sLineLaserBias
The line SFP laser bias of the port. If the line SFP
is not plugged in, the object should contain the value of -1.
0.001 AmpInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.3.1.1.16
lt2sLineTxLow
The line SFP laser TX low threshold of the port.
dBmInteger32r/w
Constraints:
range: -10-2
 .1.3.6.1.4.1.35616.5.3.1.1.17
lt2sLineTxHigh
The line SFP laser TX high threshold of the port.
dBmInteger32r/w
Constraints:
range: -4-8
 .1.3.6.1.4.1.35616.5.3.1.1.18
lt2sLineRxLow
The line SFP laser RX low threshold of the port.
dBmInteger32r/w
Constraints:
range: -30-0
 .1.3.6.1.4.1.35616.5.3.1.1.19
lt2sLineRxHigh
The line SFP laser RX high threshold of the port.
dBmInteger32r/w
Constraints:
range: -12-6
 .1.3.6.1.4.1.35616.5.3.1.1.20
lt2sClientPlugged
The client SFP plugged state of the port.
Enumeration
Enumerated Values:
1notPlugged
2plugged
3notAvailable
 .1.3.6.1.4.1.35616.5.3.1.1.21
lt2sClientLink
The client SFP link state of the port.
Enumeration
Enumerated Values:
1down
2up
3notAvailable
 .1.3.6.1.4.1.35616.5.3.1.1.22
lt2sClientApsd
The automatic power shut down state of the client port.
Enumeration
Enumerated Values:
1no
2yes
3disabled
4notAvailable
 .1.3.6.1.4.1.35616.5.3.1.1.23
lt2sClientType
The client SFP type of the port.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.35616.5.3.1.1.24
lt2sClientWavelength
The client SFP wavelength of the port. If the client SFP
is not plugged in, the object should contain the value of 'NA'.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.35616.5.3.1.1.25
lt2sClientTxPower
The client SFP transmit power of the port. If the client SFP
is not plugged in, the object should contain the value of -1.
0.001 dBmInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.3.1.1.26
lt2sClientRxPower
The client SFP receive power of the port. If the client SFP
is not plugged in, the object should contain the value of -1.
0.001 dBmInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.3.1.1.27
lt2sClientLaserTemp
The client SFP laser temperature of the port. If the client SFP
is not plugged in, the object should contain the value of -1.
degrees CentigradeInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.3.1.1.28
lt2sClientLaserBias
The client SFP laser bias of the port. If the client SFP
is not plugged in, the object should contain the value of -1.
0.001 AmpInteger32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.35616.5.3.1.1.29
lt2sClientTxLow
The client SFP laser TX low threshold of the port.
dBmInteger32r/w
Constraints:
range: -10-2
 .1.3.6.1.4.1.35616.5.3.1.1.30
lt2sClientTxHigh
The client SFP laser TX high threshold of the port.
dBmInteger32r/w
Constraints:
range: -4-8
 .1.3.6.1.4.1.35616.5.3.1.1.31
lt2sClientRxLow
The client SFP laser RX low threshold of the port.
dBmInteger32r/w
Constraints:
range: -30-0
 .1.3.6.1.4.1.35616.5.3.1.1.32
lt2sClientRxHigh
The client SFP laser RX high threshold of the port.
dBmInteger32r/w
Constraints:
range: -12-6
 .1.3.6.1.4.1.35616.5.3.1.1.33