LUM-SITE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
18

siteExtAlarmTable

table
.1.3.6.1.4.1.8708.2.42.2.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk siteExtAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SITE-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SITE-MIB::siteExtAlarmTable' 
This table handles configuration and alarm status for all
External Alarms in the system. One entry in this table
represents a single External Alarm logical input. Entries are
automatically created in this table when configuration for
hardware with External Alarm input(s) are added to the system and
automatically deleted when such hardware is removed from
configuration.
siteExtAlarmEntry row .1.3.6.1.4.1.8708.2.42.2.2.1.1
An entry in the External Alarm table.
Each entry represents a logical External Alarm input.
Indexes
Column Syntax OID
siteExtAlarmIndex
An arbitrary index assigned to each External Alarm entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.42.2.2.1.1.1
siteExtAlarmName
The name of the External Alarm, e.g. 'extalarm:1:1:2'.

The first number indicates the subrack where the physical
External Alarm connector is located.

The second number indicates the slot wh…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.8708.2.42.2.2.1.1.2
siteExtAlarmAdminStatus
The administrative state of the External Alarm.

down - The external alarm is not in use.
Suppresses alarm propagation.

up - The external alarm is in use.
Enumerationr/w
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.8708.2.42.2.2.1.1.3
siteExtAlarmLevel
'Active' level of this alarm:

activeHigh Alarm is activated by a high input signal level.

activeLow Alarm is activated by a low input signal level.
Enumerationr/w
Enumerated Values:
1activeHigh
2activeLow
 .1.3.6.1.4.1.8708.2.42.2.2.1.1.4
siteExtAlarmSeverity
The severity of this alarm.
LUM-ALARM-MIBAlarmPerceivedSeverityr/w
Type Values:
0undefined
1cleared
2indeterminate
3warning
4minor
5major
6critical
Description:
Alarm severity as defined in ITU-T X.733.
 .1.3.6.1.4.1.8708.2.42.2.2.1.1.5
siteExtAlarmText
The alarm text associated with this alarm. The alarm text
is displayed in alarm lists and logs.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.8708.2.42.2.2.1.1.6
siteExtAlarmActive
The external alarm is active according to active high or low
setting configured by the 'Level' attribute.

Activation: Active HW indication.

De-activation: Inactive HW indication.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.42.2.2.1.1.7
siteExtAlarmId
Identifier for the entry
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.42.2.2.1.1.8
siteExtAlarmOperStatus
The operational state of the external alarm.
This attribute is required to automatically suppress (or not)
alarmActive from admin status attribute.
LUM-TCBoardOrInterfaceOperStatus
Type Values:
1notPresent
2down
3up
Description:
The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…
 .1.3.6.1.4.1.8708.2.42.2.2.1.1.9

siteExtAlarmOutTable

table
.1.3.6.1.4.1.8708.2.42.2.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk siteExtAlarmOutTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SITE-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SITE-MIB::siteExtAlarmOutTable' 
This table handles configuration and alarm status for all
Output External Alarms in the system. One entry in this table
represents a single External Alarm logical output. Entries are
automatically created in this table when configuration for
hardware with External Alarm output is added to the system and
automatically deleted when such hardware is removed from
configuration.
siteExtAlarmOutEntry row .1.3.6.1.4.1.8708.2.42.2.3.1.1
An entry in the External Alarm Output table.
Each entry represents a logical External Alarm output.
Indexes
Column Syntax OID
siteExtAlarmOutIndex
An arbitrary index assigned to each External Alarm output entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.42.2.3.1.1.1
siteExtAlarmOutName
The name of the External Alarm Output, e.g. 'extalarmout:1:1:2'.

The first number indicates the subrack where the physical
External Alarm Output connector is located.

The second number indi…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.8708.2.42.2.3.1.1.2
siteExtAlarmOutAdminStatus
The administrative state of the External Alarm Output.

down - The external alarm output is not in use.
Suppresses alarm propagation.

up - The external alarm is in use.
LUM-TCAdminStatusWithNAr/w
Type Values:
1down
2service
3up
2147483647notApplicable
Description:
The administrative state for an interface.

down - The interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
service or re-confi…
 .1.3.6.1.4.1.8708.2.42.2.3.1.1.3
siteExtAlarmOutOperStatus
The operational state of the external alarm output.
This attribute is required to automatically suppress (or not)
alarmActive from admin status attribute.
LUM-TCOperStatusWithNA
Type Values:
1notPresent
2down
3up
2147483647notApplicable
Description:
The operational state for a interface.

notPresent - The interface is not available.

down - The interface is de-activated or
there are faults preventing it from going to the
'up'-state.

u…
 .1.3.6.1.4.1.8708.2.42.2.3.1.1.4
siteExtAlarmOutLevel
'Active' level of this alarm:

activeHigh Alarm is activated by a high input signal level.

activeLow Alarm is activated by a low input signal level.
Enumerationr/w
Enumerated Values:
1activeHigh
2activeLow
 .1.3.6.1.4.1.8708.2.42.2.3.1.1.5
siteExtAlarmOutSeverity
The severity of this alarm.
LUM-ALARM-MIBAlarmPerceivedSeverityr/w
Type Values:
0undefined
1cleared
2indeterminate
3warning
4minor
5major
6critical
Description:
Alarm severity as defined in ITU-T X.733.
 .1.3.6.1.4.1.8708.2.42.2.3.1.1.6
siteExtAlarmOutText
The alarm text associated with this alarm.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.8708.2.42.2.3.1.1.7
siteExtAlarmOutActive
The external alarm output is active according to active high
or low setting configured by the 'Level' attribute.

Activation: Active HW indication.

De-activation: Inactive HW indication.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.42.2.3.1.1.8
siteExtAlarmOutId
Identifier for the entry
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.42.2.3.1.1.9