LUM-MUX-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
70

muxIfTable

table
.1.3.6.1.4.1.8708.2.13.2.2.1 · 1 row entry · 48 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk muxIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MUX-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MUX-MIB::muxIfTable' 
The interface list.
muxIfEntry row .1.3.6.1.4.1.8708.2.13.2.2.1.1
An entry in the interface list.
Indexes
Column Syntax OID
muxIfIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.1
muxIfName
The management name of the interface,
for example 'muxi:1:2:1', where the first number
indicates sub-rack, the second slot number and
the third is the port number.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.2
muxIfDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.3
muxIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.4
muxIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.5
muxIfTxPort
The number of the port where the TX-side of the
interface is located.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.6
muxIfRxPort
The number of the port where the RX-side of
the interface is located.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.7
muxIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.8
muxIfPowerLevel
The received power level in units of 0.1 dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.9
muxIfPowerLevelHighThreshold
The upper threshold for received power level in
units of 0.1 dBm.
Integer32r/w
Constraints:
range: -200--10
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.10
muxIfPowerLevelLowThreshold
The lower threshold for received power level in
units of 0.1 dBm.
Integer32r/w
Constraints:
range: -200--10
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.11
muxIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Type Values:
1down
2service
3up
Description:
The administrative state for a board or
interface.

down - The board/interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
servi…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.12
muxIfOperStatus
The operational state for the interface.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to the
'up'-s…
LUM-TCBoardOrInterfaceOperStatus
Type Values:
1notPresent
2down
3up
Description:
The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.13
muxIfLossOfSignal
Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW indication.

D(e-activation): Inactive loss of signal HW
indication.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.14
muxIfReceivedPowerHigh
Received power level is too high.
Applicable for all signal formats.

A: The received power level exceeds the
the built-in overload threshold.

D: The received power level is 0.5 dB below the…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.15
muxIfReceivedPowerLow
Received power level low threshold exceeded.
Applicable for all signal formats.

A: The received power level is below the
associated threshold.

D: The received power level is 0.5 dB above
th…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.16
muxIfBitrateMismatch
Bitrate mismatch (Other).
Applicable for other signal formats.

D: The interface is unable to lock to the
inserted signal.

D: The interface is able to lock to the
inserted signal.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.17
muxIfLaserBias
Measures laser bias current value in tenths
of mA (0.1 mA).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.18
muxIfLaserBiasThreshold
Sets the threshold for the laser bias alarm.
in percentage relative to the value set during
production. The preset value is 100%.
Unsigned32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.19
muxIfJ0PathTracedeprecated
Note: This attribute is deprecated!

The recevied J0 path trace string.
Applicable for SDH/Sonet signal formats.
OctetString
Constraints:
range: 1-1
range: 16-16
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.20
muxIfAlarmIndicationSignal
Alarm indication signal.
Applicable for SDH/Sonet signal formats.

A: An 'all ones' SDH signal is detected.

D: SDH signal recovered.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.21
muxIfLossOfFrame
Loss of frame.
Applicable for SDH/Sonet signal formats.

A: SDH frame can not be located.

D: SDH frame is located.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.22
muxIfLaserStatus
The operational state of the TX-side laser.

off - The laser is turned off.

on - The laser is turned on.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.23
muxIfTxDirection
The direction of the transmitted signal.

undefined - Unknown/Dont care

toWest - The transmitted signal is sent to west.

toEast - The transmitted signal is sent to east.
MuxTxDirectionr/w
Type Values:
0undefined
1toWest
2toEast
Description:
The direction of the transmitted signal.

undefined - Unknown/Dont care

toWest - The transmitted signal is sent to west

toEast - The transmitted signal is sent to east
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.24
muxIfExpectedTxLambda
The expected frequency given in hundreds of
GHz (0.01 GHz).
This attribute can be written via SNMP.
LUM-TCLambdaFrequencyr/w
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
1611w1611
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
Description:
The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.25
muxIfTxLambda
The transmitted frequency given in hundreds
of GHz (0.01 GHz).
LUM-TCLambdaFrequency
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
1611w1611
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
Description:
The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.26
muxIfTraceIntrusionMode
Indicates wether the trace identifier should
be inserted in the transmitted signal.

disabled - The trace identifier is taken from
the recevied signal if possible.

enabled - The trace ident…
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.27
muxIfTraceTransmitted
The trace identifier to be transmitted from
this interface.

Set to empty string for default value:

<IP address>:<subrack>:<slot>:<port>

Note that only the last part of the…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.28
muxIfTraceReceived
The received trace identifier for this interface.
SNMPv2-TCDisplayString
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.29
muxIfTraceExpected
Trace identifier used for matching against
the received trace identifier.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-15
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.30
muxIfTraceAlarmMode
Controls if the trace identifier mismatch alarm
should be raised.

disabled - The alarm is disabled.

enabled - The alarm is raised if expected trace
identifier differs from the received trac…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.31
muxIfTraceMismatch
Indicates if the expected trace identifier
differs from the received trace identifier.

A: The received trace identifier differs from
the expected trace identifier.

D: The identifiers match.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.32
muxIfOHTransparency
The 'OH Transparency' setting shall be set to 'off' for
standard SDH/SONET mode.

When set to 'on', the following tributary OH-bytes are
transparently transported:
E1, E2, F1, D1-D3, D4-D12, K1, K2
…
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.33
muxIfSuppressRemoteAlarms
Suppress AIS and RDI in the alarm list. The fault status on
the port object can, however, be seen.

disabled - alarms are not suppressed.

enabled - alarms are suppressed.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.34
muxIfHighSpeedMin
The minmum speed in units of 1,000,000 bits (Mb)
per second. If this object reports a value of 'n'
then the speed of the interface is somewhere in
the range of 'n-500,000' to 'n+499,999'.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.35
muxIfHighSpeedMax
The maximum speed in units of 1,000,000 bits per
second. If this object reports a value of 'n'
then the speed of the interface is somewhere in
the range of 'n-500,000' to 'n+499,999'.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.36
muxIfTrxCodeMismatch
The inserted transceiver does not have a legal
manufacturer code.

A: A transceiver with illegal code is inserted.

D: The transceiver with illegal code is removed.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.37
muxIfTrxBitrateUnavailable
The inserted transceiver does not support the requested
bit rate.

A: A transceiver with other supported bit rate than
the requested bit rate is inserted.

D: The transceiver with the non-…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.38
muxIfTrxMissing
An expected transceiver is missing.

A: An expected transceiver is missing.

D: The missing transceiver is inserted.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.39
muxIfTrxClass
String that describes the transceiver class.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.40
muxIfTransmitterFailed
The transceiver HW has detected a failure
in the transmitter part.

A: The transmitter has failed

D: The transmitter is OK again
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.41
muxIfUnexpectedFrequency
The actual frequency does not match the
pre-configured frequency.

A pre-configured frequency of '0' matches
all actual frequencies.

A: The configured frequency does not match the
actual fre…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.42
muxIfIllegalFrequency
The frequency supported by the transceiver is not
recognized by the system.

A: Invalid or unknown frequency information is
detected in the (pluggable) transceiver or
board production data.
…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.43
muxIfReceiverSensitivity
The lowest power that the receiver is guaranteed
to handle, in units of 0.1 dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.44
muxIfPowerLevelLowRelativeThreshold
The lower threshold for received power level in
units of 0.1 dB, relative to the receiver
sensitivity.
Integer32r/w
Constraints:
range: -50-100
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.45
muxIfObjectProperty
Property mask.
LUM-TCObjectProperty
Type Constraints:
range: 0..4294967295
Description:
A bitmask of length 32 encoding certain properties
of an object.
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.46
muxIfTxPowerLevel
The transmitted power level in units of 0.1 dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.47
muxIfLaserTempActual
The actual laser temperature in units of
0.1 degrees centigrade.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.13.2.2.1.1.48

muxVc4Table

table
.1.3.6.1.4.1.8708.2.13.2.3.1 · 1 row entry · 22 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk muxVc4Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MUX-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MUX-MIB::muxVc4Table' 
The interface list.
muxVc4Entry row .1.3.6.1.4.1.8708.2.13.2.3.1.1
An entry in the interface list.
Indexes
Column Syntax OID
muxVc4Index
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.1
muxVc4Name
The management name of the vc4,
e.g. vc4:1:2:21-22:8 where the first number
indicates sub-rack, the second slot number and
the third/forth are the port numbers. The last
number is the vc4 id within the STM16 frame.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.2
muxVc4Descr
User configurable label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.3
muxVc4Subrack
The number of the subrack where the vc4 is
located.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.4
muxVc4Slot
The number of the slot where the vc4 is
located.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.5
muxVc4TxPort
The number of the port where the TX-side of the
vc4 is located.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.6
muxVc4RxPort
The number of the port where the RX-side of the
vc4 is located.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.7
muxVc4Vc4
The id of the vc4 within the STM16 frame.
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.8
muxVc4Mode
What to do with the vc4.

addDrop - Add/drop it from/to the ports specified
by muxVc4ClientDropPort and muxVc4ClientAddPort.

passThrough - Pass-through.
Enumeration
Enumerated Values:
1addDrop
2passThrough
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.9
muxVc4ClientDropPort
The connected drop port, if muxVc4Mode is
set to 'addDrop'.

0 is undefined (used at pass-through).

For mxp028:

1 - first SMT4 i/f
3 - second STM4 i/f
5 - first STM1 i/f
...
1…
Unsigned32
Constraints:
range: 0-20
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.10
muxVc4TxDirection
The direction of the transmitted signal.

undefined - Unknown/Dont care

toWest - The transmitted signal is sent to west.

toEast - The transmitted signal is sent to east.
MuxTxDirection
Type Values:
0undefined
1toWest
2toEast
Description:
The direction of the transmitted signal.

undefined - Unknown/Dont care

toWest - The transmitted signal is sent to west

toEast - The transmitted signal is sent to east
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.11
muxVc4ClientAddPort
The connected add port, if muxVc4Mode is set
to 'addDrop'.

0 is undefined (used at pass-through)

For mxp028:

2 - first SMT4 i/f
4 - second STM4 i/f
6 - first STM1 i/f
...
20 …
Unsigned32
Constraints:
range: 0-20
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.12
muxVc4ConnectionModedeprecated
Describes how the VC is used in the ring and
the node.

unused - The VC4 is not used in the ring.

ringUsed - the VC4 is used in the ring,
but is not allowed to add/drop in this node.
…
Enumerationr/w
Enumerated Values:
1unused
2ringUsed
3nodeUsed
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.13
muxVc4ConnectionStatusdeprecated
How the VC4 is handled.

addDrop - Add/drop it from/to the ports specified
by muxVc4ClientDropPort and muxVc4ClientAddPort.

passThrough - Pass-through the node.

unconnected - …
Enumeration
Enumerated Values:
1addDrop
2passThrough
3unconnected
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.14
muxVc4ConnectionOverview
What to do with the vc4.

addDrop - Add/drop it from/to the ports specified
by muxVc4ClientDropPort and muxVc4ClientAddPort.

passThrough - Pass-through the node.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.15
muxVc4ObjectProperty
Property mask.
LUM-TCObjectProperty
Type Constraints:
range: 0..4294967295
Description:
A bitmask of length 32 encoding certain properties
of an object.
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.16
muxVc4AuAlarmIndicationSignalW2C
Alarm indication signal (AIS) on the trunk-side.
Applicable for SDH/Sonet signal formats.

A: An 'all ones' SDH signal is detected.

D: SDH signal recovered.
Enumeration
Enumerated Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.17
muxVc4AuLossOfPointerW2C
Loss of pointer detected on the trunk-side.
Applicable for SDH/Sonet signal formats.

A: A loss of pointer is detected.

D: SDH signal recovered.
Enumeration
Enumerated Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.18
muxVc4RxSignalStatus
The operational state for incoming (RX) signal
of the interface.

down - A fault that would lead to a protection
switch has occurred.

degraded - The signal quality is impaired.
…
Enumeration
Enumerated Values:
1down
2degraded
3up
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.19
muxVc4ConcatenationStatus
Describes if the VC4s are concatenated.

on - Concatenation is used.

off - No concatenation is used.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.20
muxVc4PayloadStatus
Describes if the VC4 contains payload.

equipped - VC4 contains payload.

unequipped - No payload in VC4.
Enumeration
Enumerated Values:
1equipped
2unequipped
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.21
muxVc4AdminStatus
The administrative state for the interface.

down - The interface should be inactive.

up - The interface should be activated when
it becomes available. Alarms are not suppressed.
Enumerationr/w
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.8708.2.13.2.3.1.1.22