LUM-LLDP-V2-MIB Table View

The table contians system related infromation used to send to the neighbors.
It contains aggregated information also available in other tables but is presentied
in this mib for informational purposes

lldpV2SystemInfoEntry row .1.3.6.1.4.1.8708.2.67.2.2.1.1

System Information used when configuring a particular agent.
The contents of this table is NOT persistent across
re-initializations or re-boots.

Indexes

lldpV2SystemInfoIndex

Column	Syntax	OID
lldpV2SystemInfoIndex An arbitrary index assigned to each entry.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.67.2.2.1.1.1
lldpV2SystemInfoName The management name of this entry	LUM-TCMgmtNameStringr/w Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.67.2.2.1.1.2
lldpV2SystemInfoSystemName The system name of the node	LUM-TCMgmtNameStringr/w Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.67.2.2.1.1.3
lldpV2SystemInfoSystemDescription The system description for the node	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.67.2.2.1.1.4
lldpV2SystemInfoSystemMacAddress The system interface MAC address.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.8708.2.67.2.2.1.1.5
lldpV2SystemInfoManagementIp The local IP address associated with this node.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.8708.2.67.2.2.1.1.6
lldpV2SystemInfoManagementOID The system information OID.	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.8708.2.67.2.2.1.1.7
lldpV2SystemInfoMaxNeighbors The maximum number of neighbors allowed per agent.	Unsigned32r/w Constraints: range: 1-1	.1.3.6.1.4.1.8708.2.67.2.2.1.1.8
lldpV2SystemInfoSubrack The number of the subrack where the board is located.	LUM-TCSubrackNumberr/w Type Constraints: range: 0..15 Description: The number of a subrack within a network element. 0 signifies an undefined subrack number.	.1.3.6.1.4.1.8708.2.67.2.2.1.1.9
lldpV2SystemInfoSlot The number of the slot where the board is located.	LUM-TCSlotNumberr/w Type Constraints: range: 0..22 Description: The number of a slot within a subrack. 0 signifies an undefined slot number.	.1.3.6.1.4.1.8708.2.67.2.2.1.1.10

The table that controls LLDP frame transmission on individual
agents and using particular destination MAC addresses.

lldpV2AgentConfigEntry row .1.3.6.1.4.1.8708.2.67.2.3.1.1

LLDP configuration information for a particular agent and
destination MAC address.

This configuration parameter controls the transmission and
the reception of LLDP frames on those interface/address
combinat…

Indexes

lldpV2AgentConfigIndex

Column	Syntax	OID
lldpV2AgentConfigIndex An arbitrary index assigned to each entry.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.67.2.3.1.1.1
lldpV2AgentConfigName The management name of the LLDP agent	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.67.2.3.1.1.2
lldpV2AgentConfigLocalMacAddress The local MAC address associated with this entry.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.8708.2.67.2.3.1.1.3
lldpV2AgentConfigDestMacAddress The configured destination MAC address associated with this entry.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.8708.2.67.2.3.1.1.4
lldpV2AgentConfigAdminStatus The administrative state for the object. disable - The object is de-activated. txAndRx - The object is activated both for sending receiving remote information.	Enumerationr/w Enumerated Values: 1 disabled 2 txAndRx	.1.3.6.1.4.1.8708.2.67.2.3.1.1.5
lldpV2AgentConfigNotificationEnable The lldpV2AgentConfigNotificationEnable controls, on a per agent basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.67.2.3.1.1.6
lldpV2AgentConfigMessageTxInterval The interval at which LLDP frames are transmitted on behalf of LLDP agent. The default value for lldpV2AgentConfigMessageTxInterval object is 30 seconds. The value of this object is restore…	Unsigned32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.8708.2.67.2.3.1.1.7
lldpV2AgentConfigRxPort The RX-port of the local interface.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.67.2.3.1.1.8
lldpV2AgentConfigTxPort The TX-port of the interface.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.67.2.3.1.1.9
lldpV2AgentConfigUpPort Internal port reference for traffic unit.	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.67.2.3.1.1.10
lldpV2AgentConfigAgentId Internal reference id for the agent.	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.67.2.3.1.1.11
lldpV2AgentConfigIfNo The physical interface number of the actual multi-connector port.	LUM-TCPortNumber Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.67.2.3.1.1.12
lldpV2AgentConfigPortDesc The string value used to identify the description of the given port.	SNMP-FRAMEWORK-MIBSnmpAdminString Constraints: range: 0-127	.1.3.6.1.4.1.8708.2.67.2.3.1.1.13

This table contains one or more rows per physical network
connection known to this agent. The agent may wish to ensure
that only one lldpV2RemEntry is present for each local port
and destination MAC address,or it may choose to maintain multiple
lldpV2RemEntries for the same local port and destination MAC address.

lldpV2RemEntry row .1.3.6.1.4.1.8708.2.67.2.4.1.1

Information about a particular physical network connection.
Entries may be created and deleted in this table by the agent,
if a physical topology discovery process is active.

Indexes

lldpV2RemIndex

Column	Syntax	OID
lldpV2RemIndex An arbitrary index assigned to each entry. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemIndex can…	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.1
lldpV2RemName The management name of the LLDP Remote entry. for example 'neighbor:1:2:1-2' (neighbor:[subrack]:[slot][if]:[tx-rx])	LUM-TCMgmtNameStringr/w Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.67.2.4.1.1.2
lldpV2RemLocalIfIndex The interface index value used to identify the port associated with this entry.	Unsigned32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.3
lldpV2RemSourceMACAddress The source mac address of received LLDP frame.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.8708.2.67.2.4.1.1.4
lldpV2RemChassisIdSubtype The type of encoding used to identify the chassis associated with the remote system.	LldpV2ChassisIdSubtyper/w Type Values: 1 chassisComponent 2 interfaceAlias 3 portComponent 4 macAddress 5 networkAddress 6 interfaceName 7 local 2147483646 notAvailable Description: This TC describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 4133) for a chass…	.1.3.6.1.4.1.8708.2.67.2.4.1.1.5
lldpV2RemChassisId The string value used to identify the chassis component associated with the remote system.	LldpV2ChassisIdr/w Type Constraints: range: 1..255 Description: This TC describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId object instan…	.1.3.6.1.4.1.8708.2.67.2.4.1.1.6
lldpV2RemPortIdSubtype The type of port identifier encoding used in the associated 'lldpRemPortId' object.	LldpV2PortIdSubtyper/w Type Values: 1 interfaceAlias 2 portComponent 3 macAddress 4 networkAddress 5 interfaceName 6 agentCircuitId 7 local 2147483646 notAvailable Description: This TC describes the source of a particular type of port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC…	.1.3.6.1.4.1.8708.2.67.2.4.1.1.7
lldpV2RemPortId The string value used to identify the port component associated with the remote system.	LldpV2PortIdr/w Type Constraints: range: 0..255 Description: This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. …	.1.3.6.1.4.1.8708.2.67.2.4.1.1.8
lldpV2RemPortDesc The string value used to identify the description of the given port associated with the remote system.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.8708.2.67.2.4.1.1.9
lldpV2RemSysName The string value used to identify the system name of the remote system.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.8708.2.67.2.4.1.1.10
lldpV2RemSysDesc The string value used to identify the system description of the remote system.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.8708.2.67.2.4.1.1.11
lldpV2RemSysCapEnabled The capabilities that are enabled on the remote system. The original TLV is a bit mask and is decoded as follows. (O) Other (bit 0), (RE) Repeater (bit 1), (B) Bridge (bit 2), (W) WLAN AP (bit 3), (RO) Router (bit 4), (…	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.8708.2.67.2.4.1.1.12
lldpV2RemSysCapSupported The capabilities that are supported on the remote system. The original TLV is a bit mask and is decoded as follows. (O) Other (bit 0), (RE) Repeater (bit 1), (B) Bridge (bit 2), (W) WLAN AP (bit 3), (RO) Router (bit 4),…	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.8708.2.67.2.4.1.1.13
lldpV2RemManAddrSubtype The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object. It should be noted that only a subset of the possible address encodings enumerated in AddressFamily…	LumAddressFamilyNumbersr/w Type Values: 0 other 1 ipV4 2 ipV6 3 nsap 4 hdlc 5 bbn1822 6 all802 7 e163 8 e164 9 f69 10 x121 11 ipx 12 appleTalk 13 decnetIV 14 banyanVines 15 e164withNsap 16 dns 17 distinguishedName 18 asNumber 19 xtpOverIpv4 20 xtpOverIpv6 21 xtpNativeModeXTP 22 fibreChannelWWPN 23 fibreChannelWWNN 24 gwid 65535 reserved 2147483646 notAvailable 2147483647 notApplicable Description: The definition of this textual convention with the addition of newly assigned values is published periodically by the IANA, in either the Assigned Numbers RFC, or some derivative of it specific to Internet Network Manag…	.1.3.6.1.4.1.8708.2.67.2.4.1.1.14
lldpV2RemManAddr The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.	LldpV2ManAddressr/w Type Constraints: range: 1..127 Description: The value of a management address associated with the LLDP agent that may be used to reach higher layer entities to assist discovery by network management. It should be noted that appropriate security credent…	.1.3.6.1.4.1.8708.2.67.2.4.1.1.15
lldpV2RemManAddrIfSubtype The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.	LldpV2ManAddrIfSubtyper/w Type Values: 1 unknown 2 ifIndex 3 systemPortNumber 2147483646 notAvailable 2147483647 notApplicable Description: This TC defines an enumeration value that identifies the interface numbering method used for defining the interface number associated with a management address. An object with this syntax defines the format of an interf…	.1.3.6.1.4.1.8708.2.67.2.4.1.1.16
lldpV2RemManAddrIfId The integer value used to identify the interface number regarding the management address component associated with the remote system. The value depends upon the value of the lldpV2RemManAddrIfSubtype for the table row.	Unsigned32r/w Constraints: range: 0-2147483644 range: 2147483646-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.17
lldpV2RemManAddrOID The decoded OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.8708.2.67.2.4.1.1.18
lldpV2RemTooManyNeighbors Indicates that there are too many neighbors as determined by the variable tooManyNeighbors.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8708.2.67.2.4.1.1.19
lldpV2RemMtuSize Indicates the remote side MTU size.	Unsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.20
lldpV2RemLagId Indicates the remote side lag Id.	Unsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.21
lldpV2RemLagisAggCapable Indicates if the remote side is capable of aggregation.	LUM-TCTruthValueWithNAr/w Type Values: 0 true 1 false 2147483646 notAvailable 2147483647 notApplicable Description: Defines a value that can be true, false or not available true - The condition is false false - The condition is not true notAvailable (2147483646) is used when attribute is …	.1.3.6.1.4.1.8708.2.67.2.4.1.1.22
lldpV2RemLagisAggregated Indicates if the remote side is aggregated.	LUM-TCTruthValueWithNAr/w Type Values: 0 true 1 false 2147483646 notAvailable 2147483647 notApplicable Description: Defines a value that can be true, false or not available true - The condition is false false - The condition is not true notAvailable (2147483646) is used when attribute is …	.1.3.6.1.4.1.8708.2.67.2.4.1.1.23
lldpV2RemUpTime Time since entry was first added (seconds).	Unsigned32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.24
lldpV2RemTimeout Indicates the remote side timeout (seconds).	Unsigned32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.25
lldpV2RemTTL Indicates the remote side TTL TLV (seconds).	Unsigned32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.26
lldpV2RemSubrack The number of the subrack where the local interface is located.	LUM-TCSubrackNumberr/w Type Constraints: range: 0..15 Description: The number of a subrack within a network element. 0 signifies an undefined subrack number.	.1.3.6.1.4.1.8708.2.67.2.4.1.1.27
lldpV2RemSlot The number of the slot where the local interface is located.	LUM-TCSlotNumberr/w Type Constraints: range: 0..22 Description: The number of a slot within a subrack. 0 signifies an undefined slot number.	.1.3.6.1.4.1.8708.2.67.2.4.1.1.28
lldpV2RemTxPort The TX-port of the local interface.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.67.2.4.1.1.29
lldpV2RemRxPort The RX-port of the local interface.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.67.2.4.1.1.30
lldpV2RemIdx Internal object reference	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.31
lldpV2RemIfNo The local physical interface number of the actual multi-connector port.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.67.2.4.1.1.32
lldpV2RemUpPortId Internal port reference for traffic unit.	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.33
lldpV2RemAgentId Reference to AgentId.	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.67.2.4.1.1.34

A table containing LLDP transmission statistics.

lldpV2StatsEntry row .1.3.6.1.4.1.8708.2.67.2.5.1.1

LLDP frame reception statistics for a particular port.
The port is contained in the same chassis as the LLDP agent.

Indexes

lldpV2StatsIndex

Column	Syntax	OID
lldpV2StatsIndex An arbitrary index assigned to each entry.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.8708.2.67.2.5.1.1.1
lldpV2StatsAgentId Id of the LLDP agent.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.67.2.5.1.1.2
lldpV2StatsName The management name is used to identify the agent.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.67.2.5.1.1.3
lldpV2StatsTxPortFramesTotal A count of all LLDP frames transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.67.2.5.1.1.4
lldpV2StatsRxPortFramesDiscardedTotal A count of all LLDPDUs received and then discarded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.67.2.5.1.1.5
lldpV2StatsRxPortFramesErrors A count of all LLDPDUs received with one or more detectable errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.67.2.5.1.1.6
lldpV2StatsRxPortFramesTotal A count of all LLDP frames received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.67.2.5.1.1.7
lldpV2StatsAgeOutsTotal A count of the times that a neighbours information is deleted from the LLDP remote systems MIB because of rxInfoTTL timer expiration.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.67.2.5.1.1.8
lldpV2StatsTLVSDiscardedTotal A count of all TLVs received and discarded for any reason.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.67.2.5.1.1.9
lldpV2StatsTLVSUnrecognizedTotal This counter provides a count of all TLVs not recognised by the receiving LLDP local agent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.67.2.5.1.1.10
lldpV2StatsSubrack The number of the subrack where the local interface is located.	LUM-TCSubrackNumberr/w Type Constraints: range: 0..15 Description: The number of a subrack within a network element. 0 signifies an undefined subrack number.	.1.3.6.1.4.1.8708.2.67.2.5.1.1.11
lldpV2StatsSlot The number of the slot where the local interface is located.	LUM-TCSlotNumberr/w Type Constraints: range: 0..22 Description: The number of a slot within a subrack. 0 signifies an undefined slot number.	.1.3.6.1.4.1.8708.2.67.2.5.1.1.12
lldpV2StatsTxPort The TX-port of the local interface.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.67.2.5.1.1.13
lldpV2StatsRxPort The RX-port of the local interface.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.67.2.5.1.1.14
lldpV2StatsIdx Internal object reference	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.67.2.5.1.1.15
lldpV2StatsIfNo The local physical interface number of the actual multi-connector port.	LUM-TCPortNumberr/w Type Constraints: range: 0..116 Description: The number of a port on a board. If an interface has two numbers, the lowest number is used. 0 signifies an undefined port number.	.1.3.6.1.4.1.8708.2.67.2.5.1.1.16
lldpV2StatsClientIdx Internal object reference local client interface.	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.67.2.5.1.1.17
lldpV2StatsUpPortId Internal port reference for traffic unit.	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.67.2.5.1.1.18
lldpV2StatsReset Reset LLDP statistics counters.	Enumerationr/w Enumerated Values: 1 normal 2 reset	.1.3.6.1.4.1.8708.2.67.2.5.1.1.19