LUM-LLDP-V2-MIB

        The MIB module for LLDP-V2.
it is a customized version of the standard LLDP-V2-MIB.
        
The tables contained in this MIB are:
        
(1) The General group contains some general attributes as time stamps
    and tables sizes.
        
(2) The lldpV2 Remote Systems table
(3) The lldpV2 Local Agent Config table
(4) The lldpV2 System Info table
(5) The lldpV2 Statistics table
    
Source file
LUM-LLDP-V2-MIB
Last revised
Identity
lumLldpV2MIBModule
Base OID
1.3.6.1.4.1.8708.1.1.67
Imported Objects
LUM-REG lumLldpV2MIB lumModules
LUM-TC MgmtNameString PortNumber SlotNumber SubrackNumber TruthValueWithNA
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DateAndTime DisplayString TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the infinera MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-LLDP-V2-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-LLDP-V2-MIB::lumLldpV2MIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-LLDP-V2-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-LLDP-V2-MIB::lumLldpV2MIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (100)
.1.3.6.1.4.1.8708.1.1.67
.1.3.6.1.4.1.8708.2.67.1
.1.3.6.1.4.1.8708.2.67.1.1
.1.3.6.1.4.1.8708.2.67.1.2
.1.3.6.1.4.1.8708.2.67.2
.1.3.6.1.4.1.8708.2.67.2.1
.1.3.6.1.4.1.8708.2.67.2.1.1
.1.3.6.1.4.1.8708.2.67.2.1.2
.1.3.6.1.4.1.8708.2.67.2.1.3
.1.3.6.1.4.1.8708.2.67.2.1.4
.1.3.6.1.4.1.8708.2.67.2.1.5
.1.3.6.1.4.1.8708.2.67.2.1.6
.1.3.6.1.4.1.8708.2.67.2.2
.1.3.6.1.4.1.8708.2.67.2.2.1
.1.3.6.1.4.1.8708.2.67.2.2.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.2.1.1.1
.1.3.6.1.4.1.8708.2.67.2.2.1.1.10
.1.3.6.1.4.1.8708.2.67.2.2.1.1.2
.1.3.6.1.4.1.8708.2.67.2.2.1.1.3
.1.3.6.1.4.1.8708.2.67.2.2.1.1.4
OctetString
.1.3.6.1.4.1.8708.2.67.2.2.1.1.5
.1.3.6.1.4.1.8708.2.67.2.2.1.1.6
OctetString
.1.3.6.1.4.1.8708.2.67.2.2.1.1.7
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.2.1.1.8
.1.3.6.1.4.1.8708.2.67.2.2.1.1.9
.1.3.6.1.4.1.8708.2.67.2.3
.1.3.6.1.4.1.8708.2.67.2.3.1
.1.3.6.1.4.1.8708.2.67.2.3.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.3.1.1.1
Integer32
.1.3.6.1.4.1.8708.2.67.2.3.1.1.10
Integer32
.1.3.6.1.4.1.8708.2.67.2.3.1.1.11
.1.3.6.1.4.1.8708.2.67.2.3.1.1.12
.1.3.6.1.4.1.8708.2.67.2.3.1.1.13
.1.3.6.1.4.1.8708.2.67.2.3.1.1.2
OctetString
.1.3.6.1.4.1.8708.2.67.2.3.1.1.3
OctetString
.1.3.6.1.4.1.8708.2.67.2.3.1.1.4
Enumeration
.1.3.6.1.4.1.8708.2.67.2.3.1.1.5
.1.3.6.1.4.1.8708.2.67.2.3.1.1.6
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.3.1.1.7
.1.3.6.1.4.1.8708.2.67.2.3.1.1.8
.1.3.6.1.4.1.8708.2.67.2.3.1.1.9
.1.3.6.1.4.1.8708.2.67.2.4
.1.3.6.1.4.1.8708.2.67.2.4.1
.1.3.6.1.4.1.8708.2.67.2.4.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.1
.1.3.6.1.4.1.8708.2.67.2.4.1.1.10
.1.3.6.1.4.1.8708.2.67.2.4.1.1.11
OctetString
.1.3.6.1.4.1.8708.2.67.2.4.1.1.12
OctetString
.1.3.6.1.4.1.8708.2.67.2.4.1.1.13
.1.3.6.1.4.1.8708.2.67.2.4.1.1.14
.1.3.6.1.4.1.8708.2.67.2.4.1.1.15
.1.3.6.1.4.1.8708.2.67.2.4.1.1.16
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.17
OctetString
.1.3.6.1.4.1.8708.2.67.2.4.1.1.18
.1.3.6.1.4.1.8708.2.67.2.4.1.1.19
.1.3.6.1.4.1.8708.2.67.2.4.1.1.2
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.20
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.21
.1.3.6.1.4.1.8708.2.67.2.4.1.1.22
.1.3.6.1.4.1.8708.2.67.2.4.1.1.23
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.24
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.25
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.26
.1.3.6.1.4.1.8708.2.67.2.4.1.1.27
.1.3.6.1.4.1.8708.2.67.2.4.1.1.28
.1.3.6.1.4.1.8708.2.67.2.4.1.1.29
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.3
.1.3.6.1.4.1.8708.2.67.2.4.1.1.30
Integer32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.31
.1.3.6.1.4.1.8708.2.67.2.4.1.1.32
Integer32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.33
Integer32
.1.3.6.1.4.1.8708.2.67.2.4.1.1.34
OctetString
.1.3.6.1.4.1.8708.2.67.2.4.1.1.4
.1.3.6.1.4.1.8708.2.67.2.4.1.1.5
.1.3.6.1.4.1.8708.2.67.2.4.1.1.6
.1.3.6.1.4.1.8708.2.67.2.4.1.1.7
.1.3.6.1.4.1.8708.2.67.2.4.1.1.8
.1.3.6.1.4.1.8708.2.67.2.4.1.1.9
.1.3.6.1.4.1.8708.2.67.2.5
.1.3.6.1.4.1.8708.2.67.2.5.1
.1.3.6.1.4.1.8708.2.67.2.5.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.67.2.5.1.1.1
.1.3.6.1.4.1.8708.2.67.2.5.1.1.10
.1.3.6.1.4.1.8708.2.67.2.5.1.1.11
.1.3.6.1.4.1.8708.2.67.2.5.1.1.12
.1.3.6.1.4.1.8708.2.67.2.5.1.1.13
.1.3.6.1.4.1.8708.2.67.2.5.1.1.14
Integer32
.1.3.6.1.4.1.8708.2.67.2.5.1.1.15
.1.3.6.1.4.1.8708.2.67.2.5.1.1.16
Integer32
.1.3.6.1.4.1.8708.2.67.2.5.1.1.17
Integer32
.1.3.6.1.4.1.8708.2.67.2.5.1.1.18
Enumeration
.1.3.6.1.4.1.8708.2.67.2.5.1.1.19
Integer32
.1.3.6.1.4.1.8708.2.67.2.5.1.1.2
.1.3.6.1.4.1.8708.2.67.2.5.1.1.3
.1.3.6.1.4.1.8708.2.67.2.5.1.1.4
.1.3.6.1.4.1.8708.2.67.2.5.1.1.5
.1.3.6.1.4.1.8708.2.67.2.5.1.1.6
.1.3.6.1.4.1.8708.2.67.2.5.1.1.7
.1.3.6.1.4.1.8708.2.67.2.5.1.1.8
.1.3.6.1.4.1.8708.2.67.2.5.1.1.9
Dependencies (6) 6 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. LUM-REGinfinera
  3. SNMPv2-TCrfc
  4. LUM-TCinfinera
  5. SNMPv2-CONFrfc
  6. SNMP-FRAMEWORK-MIBrfc
  7. LUM-LLDP-V2-MIBinfineraselected
Type Definitions (7)
OctetString range: 1..255
Display format: 1x:
This TC describes the format of a chassis identifier string.
Objects of this type are always used with an associated
LldpChassisIdSubtype object, which identifies the format of
the particular LldpChassisId object instance.

If the associated LldpChassisIdSubtype object has a value of
'chassisComponent(1)', then the octet string identifies
a particular instance of the entPhysicalAlias object
(defined in IETF RFC 4133) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').

If the associated LldpChassisIdSubtype object has a value
of 'interfaceAlias(2)', then the octet string identifies
a particular instance of the ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifAlias object does not contain any values,
another chassis identifier type should be used.

If the associated LldpChassisIdSubtype object has a value
of 'portComponent(3)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 4133) for a port or backplane component within
the containing chassis.

If the associated LldpChassisIdSubtype object has a value of
'macAddress(4)', then this string identifies a particular
unicast source address (encoded in network byte order and
IEEE 802.3 canonical bit order), of a port on the containing
chassis as defined in IEEE Std 802.

If the associated LldpChassisIdSubtype object has a value of
'networkAddress(5)', then this string identifies a particular
network address, encoded in network byte order, associated
with one or more ports on the containing chassis. The first
octet contains the IANA Address Family Numbers enumeration
value for the specific address type, and octets 2 through
N contain the network address value in network byte order.

If the associated LldpChassisIdSubtype object has a value
of 'interfaceName(6)', then the octet string identifies
a particular instance of the ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifName object does not contain any values,
another chassis identifier type should be used.

If the associated LldpChassisIdSubtype object has a value of
'local(7)', then this string identifies a locally assigned
Chassis ID.
Enumeration
chassisComponent(1)
interfaceAlias(2)
portComponent(3)
macAddress(4)
networkAddress(5)
interfaceName(6)
local(7)
notAvailable(2147483646)
This TC describes the source of a chassis identifier.

The enumeration 'chassisComponent(1)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 4133) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').

The enumeration 'interfaceAlias(2)' represents a chassis
identifier based on the value of ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.

The enumeration 'portComponent(3)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 4133) for a port or backplane
component (i.e., entPhysicalClass value of 'port(10)' or
'backplane(4)'), within the containing chassis.

The enumeration 'macAddress(4)' represents a chassis
identifier based on the value of a unicast source address
(encoded in network byte order and IEEE 802.3 canonical bit
order), of a port on the containing chassis as defined in
IEEE Std 802.

The enumeration 'networkAddress(5)' represents a chassis
identifier based on a network address, associated with
a particular chassis. The encoded address is actually
composed of two fields. The first field is a single octet,
representing the IANA AddressFamilyNumbers value for the
specific address type, and the second field is the network
address value.

The enumeration 'interfaceName(6)' represents a chassis
identifier based on the value of ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.

The enumeration 'local(7)' represents a chassis identifier
based on a locally defined value.
Enumeration
unknown(1)
ifIndex(2)
systemPortNumber(3)
notAvailable(2147483646)
notApplicable(2147483647)
This TC defines an enumeration value that identifies
the interface numbering method used for defining the
interface number associated with a management address.
An object with this syntax defines the format of an
interface number object.

The enumeration 'unknown(1)' represents the case where the
interface is not known. In this case, the corresponding
interface number is of zero length.

The enumeration 'ifIndex(2)' represents interface identifier
based on the ifIndex MIB object.

The enumeration 'systemPortNumber(3)' represents interface
identifier based on the system port numbering convention.
OctetString range: 1..127
Display format: 1x:
The value of a management address associated with the LLDP
agent that may be used to reach higher layer entities to
assist discovery by network management.

It should be noted that appropriate security credentials,
such as SNMP engineId, may be required to access the LLDP
agent using a management address. These necessary credentials
should be known by the network management and the objects
associated with the credentials are not included in the
LLDP agent.
OctetString range: 0..255
Display format: 1x:
This TC describes the format of a port identifier string.
Objects of this type are always used with an associated
LldpPortIdSubtype object, which identifies the format of the
particular LldpPortId object instance.

If the associated LldpPortIdSubtype object has a value of
'interfaceAlias(1)', then the octet string identifies a
particular instance of the ifAlias object (defined in IETF
RFC 2863). If the particular ifAlias object does not contain
any values, another port identifier type should be used.

If the associated LldpPortIdSubtype object has a value of
'portComponent(2)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 4133) for a port or backplane component.

If the associated LldpPortIdSubtype object has a value of
'macAddress(3)', then this string identifies a particular
unicast source address (encoded in network byte order
and IEEE 802.3 canonical bit order) associated with the port
(IEEE Std 802).

If the associated LldpPortIdSubtype object has a value of
'networkAddress(4)', then this string identifies a network
address associated with the port. The first octet contains
the IANA AddressFamilyNumbers enumeration value for the
specific address type, and octets 2 through N contain the
networkAddress address value in network byte order.

If the associated LldpPortIdSubtype object has a value of
'interfaceName(5)', then the octet string identifies a
particular instance of the ifName object (defined in IETF
RFC 2863). If the particular ifName object does not contain
any values, another port identifier type should be used.

If the associated LldpPortIdSubtype object has a value of
'agentCircuitId(6)', then this string identifies a agent-local
identifier of the circuit (defined in RFC 3046).

If the associated LldpPortIdSubtype object has a value of
'local(7)', then this string identifies a locally
assigned port ID.
Enumeration
interfaceAlias(1)
portComponent(2)
macAddress(3)
networkAddress(4)
interfaceName(5)
agentCircuitId(6)
local(7)
notAvailable(2147483646)
This TC describes the source of a particular type of port
identifier used in the LLDP MIB.

The enumeration 'interfaceAlias(1)' represents a port
identifier based on the ifAlias MIB object, defined in IETF
RFC 2863.

The enumeration 'portComponent(2)' represents a port
identifier based on the value of entPhysicalAlias (defined in
IETF RFC 4133) for a port component (i.e., entPhysicalClass
value of 'port(10)'), within the containing chassis.

The enumeration 'macAddress(3)' represents a port identifier
based on a unicast source address (encoded in network
byte order and IEEE 802.3 canonical bit order), which has
been detected by the agent and associated with a particular
port (IEEE Std 802).

The enumeration 'networkAddress(4)' represents a port
identifier based on a network address, detected by the agent
and associated with a particular port.

The enumeration 'interfaceName(5)' represents a port
identifier based on the ifName MIB object, defined in IETF
RFC 2863.

The enumeration 'agentCircuitId(6)' represents a port
identifier based on the agent-local identifier of the circuit
(defined in RFC 3046), detected by the agent and associated
with a particular port.

The enumeration 'local(7)' represents a port identifier
based on a value locally assigned.
Enumeration
other(0)
ipV4(1)
ipV6(2)
nsap(3)
hdlc(4)
bbn1822(5)
all802(6)
e163(7)
e164(8)
f69(9)
x121(10)
ipx(11)
appleTalk(12)
decnetIV(13)
banyanVines(14)
e164withNsap(15)
dns(16)
distinguishedName(17)
asNumber(18)
xtpOverIpv4(19)
xtpOverIpv6(20)
xtpNativeModeXTP(21)
fibreChannelWWPN(22)
fibreChannelWWNN(23)
gwid(24)
reserved(65535)
notAvailable(2147483646)
notApplicable(2147483647)
The definition of this textual convention with the
addition of newly assigned values is published
periodically by the IANA, in either the Assigned
Numbers RFC, or some derivative of it specific to
Internet Network Management number assignments.
(The latest arrangements can be obtained by
contacting the IANA.)

The enumerations are described as:

other(0), -- none of the following
ipV4(1), -- IP Version 4
ipV6(2), -- IP Version 6
nsap(3), -- NSAP
hdlc(4), -- (8-bit multidrop)
bbn1822(5),
all802(6), -- (includes all 802 media
-- plus Ethernet 'canonical format')
e163(7),
e164(8), -- (SMDS, Frame Relay, ATM)
f69(9), -- (Telex)
x121(10), -- (X.25, Frame Relay)
ipx(11), -- IPX (Internet Protocol Exchange)
appleTalk(12), -- Apple Talk
decnetIV(13), -- DEC Net Phase IV
banyanVines(14), -- Banyan Vines
e164withNsap(15),
-- (E.164 with NSAP format subaddress)
dns(16), -- (Domain Name System)
distinguishedName(17), -- (Distinguished Name, per X.500)
asNumber(18), -- (16-bit quantity, per the AS number space)
xtpOverIpv4(19), -- XTP over IP version 4
xtpOverIpv6(20), -- XTP over IP version 6
xtpNativeModeXTP(21), -- XTP native mode XTP
fibreChannelWWPN(22), -- Fibre Channel World-Wide Port Name
fibreChannelWWNN(23), -- Fibre Channel World-Wide Node Name
gwid(24), -- Gateway Identifier
reserved(65535)

Requests for new values should be made to IANA via
email (iana@iana.org).
Conformance Groups (6)
General objects for the LLDP V2 general group (R27.0).
.1.3.6.1.4.1.8708.2.67.1.1.1
General objects for the LLDP V2 system info group (R27.0).
.1.3.6.1.4.1.8708.2.67.1.1.2
General objects for the LLDP V2 agent config group (R27.0).
.1.3.6.1.4.1.8708.2.67.1.1.3
General objects for the LLDP V2 remote system group (R27.0).
.1.3.6.1.4.1.8708.2.67.1.1.4
General objects for the LLDP V2 statistics group (R27.0).
.1.3.6.1.4.1.8708.2.67.1.1.5
General objects for the LLDP V2 system info group (R33.0).
.1.3.6.1.4.1.8708.2.67.1.1.6
Compliance Statements (3)

OID .1.3.6.1.4.1.8708.2.67.1.2.1
The compliance statement for the LLDPV2. (R27.0)
Required groups

OID .1.3.6.1.4.1.8708.2.67.1.2.2
The compliance statement for the LLDPV2. (30.1)
Required groups

OID .1.3.6.1.4.1.8708.2.67.1.2.3
The compliance statement for the LLDPV2. (33.0)
Required groups