LUM-IFFH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
18

ifFhCpriTable

table
.1.3.6.1.4.1.8708.2.68.2.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifFhCpriTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFFH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFFH-MIB::ifFhCpriTable' 
The Cpri group contains information and
configuration for the fh cpri protocol.
ifFhCpriEntry row .1.3.6.1.4.1.8708.2.68.2.2.1.1
An entry in the ifFh Cpri list.
Indexes
Column Syntax OID
ifFhCpriIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.1
ifFhCpriUId
An unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.2
ifFhCpriName
The management name of the object,
for example 'cpri:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.3
ifFhCpriConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.4
ifFhCpriTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.5
ifFhCpriRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.6
ifFhCpriTxLossOfFrame
TX Loss of frame.

Reference: CPRI

alarm: Detecting if hyper-frame alignment cannot be achieved or is lost.

ok: If the hyper-frame alignment is achieved.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.7
ifFhCpriRxLossOfFrame
RX Loss of frame.

Reference: CPRI

alarm: Detecting if hyper-frame alignment cannot be achieved or is lost.

ok: If the hyper-frame alignment is achieved.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.8
ifFhCpriRxSAPDefectInd
When the near end explicitly informs the far end equipment that the link
shall not be used for any of the Service Access Points.

Reference: CPRI

alarm: When the near end explicitly informs …
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.9
ifFhCpriRxRemoteAlarmInd
Rx Remote Alarm Indication.

Reference: CPRI

alarm: Any errors, including LOS and LOF, that are linked to CPRI transceiver.

ok: When no errors, including LOF and LOS, are link…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.68.2.2.1.1.10

ifFhObsaiTable

table
.1.3.6.1.4.1.8708.2.68.2.3.1 · 1 row entry · 8 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifFhObsaiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFFH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFFH-MIB::ifFhObsaiTable' 
The Obsai group contains information and
configuration for the fh obsai protocol.
ifFhObsaiEntry row .1.3.6.1.4.1.8708.2.68.2.3.1.1
An entry in the ifFh Obsai list.
Indexes
Column Syntax OID
ifFhObsaiIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.68.2.3.1.1.1
ifFhObsaiUId
An unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.68.2.3.1.1.2
ifFhObsaiName
The management name of the object,
for example 'obsai:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.68.2.3.1.1.3
ifFhObsaiConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.68.2.3.1.1.4
ifFhObsaiTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.68.2.3.1.1.5
ifFhObsaiRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.68.2.3.1.1.6
ifFhObsaiRxLossOfFrame
RX Loss of frame.

Reference: OBSAI

alarm: Detecting if hyper-frame alignment cannot be achieved or is lost.

ok: If the hyper-frame alignment is achieved.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.68.2.3.1.1.7
ifFhObsaiTxLossOfFrame
TX Loss of frame.

Reference: OBSAI

alarm: Detecting if hyper-frame alignment cannot be achieved or is lost.

ok: If the hyper-frame alignment is achieved.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.68.2.3.1.1.8