LUM-COMMLINK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
25
.1.3.6.1.4.1.8708.2.74.2.2.1 · 1 row entry · 8 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk commlinkAggregatedLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-COMMLINK-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-COMMLINK-MIB::commlinkAggregatedLinkTable'
The commlink aggregated link group contains information
and configuration for the commlink aggregated link.
commlinkAggregatedLinkEntry row .1.3.6.1.4.1.8708.2.74.2.2.1.1
An entry in the commlink aggregated link list.
Column Syntax OID
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.74.2.2.1.1.1
A unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.74.2.2.1.1.2
Denotes the name of the aggregated link,
in the format: 'aggrLink:subrack:slot:idNumber'.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.74.2.2.1.1.3
Denotes the state of the aggregated link association.

assigned: Associated with atleast one component link.

unassigned: Not associated with any component link.
Enumeration
Enumerated Values:
1assigned
2unassigned
.1.3.6.1.4.1.8708.2.74.2.2.1.1.4
Denotes the status of the aggregated link.

up: at least one associated component link status is up.

down: none of the associated component links are up or IP level failure.
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.8708.2.74.2.2.1.1.5
Denotes the local IP for the aggregated link.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.74.2.2.1.1.6
Denotes the Peer IP for the aggregated link.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.8708.2.74.2.2.1.1.7
The IP connectivity lost with peers due to below reasons:

1. all component links are unavailable.
2. IP addresses could not be negotiated.

alarm: Aggregated link failure.

ok:…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
.1.3.6.1.4.1.8708.2.74.2.2.1.1.8
.1.3.6.1.4.1.8708.2.74.2.3.1 · 1 row entry · 17 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk commlinkComponentLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-COMMLINK-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-COMMLINK-MIB::commlinkComponentLinkTable'
The commlink component link group contains information
and configuration for the commlink component link.
commlinkComponentLinkEntry row .1.3.6.1.4.1.8708.2.74.2.3.1.1
An entry in the commlink component link list.
Column Syntax OID
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.74.2.3.1.1.1
An unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.74.2.3.1.1.2
Denotes the name of the component link,
in the format: 'compLink:subrack:slot:txPort-rxPort'.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.3
Denotes the gcc channel used for this link.
Enumerationr/w
Enumerated Values:
1gcc1
2gcc2
2147483647undefined
.1.3.6.1.4.1.8708.2.74.2.3.1.1.4
Denotes the status of the component link:

Up: When discovered peer link id matches the expected peer link id
and discovered host id matches the expected host id.

Down: Mismatch in expec…
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.8708.2.74.2.3.1.1.5
The admin state of the Component Link.

Up: The interface will be activated when available. Alarms are not suppressed.

Service: The component link interface is activated however alarms are s…
LUM-TCAdminStatusWithNAr/w
Type Values:
1down
2service
3up
2147483647notApplicable
Description:
The administrative state for an interface.

down - The interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
service or re-confi…
.1.3.6.1.4.1.8708.2.74.2.3.1.1.6
The operational state of this object.
This attribute is required to automatically suppress (or not)
the alarms from admin status attribute.
LUM-TCOperStatusWithNA
Type Values:
1notPresent
2down
3up
2147483647notApplicable
Description:
The operational state for a interface.

notPresent - The interface is not available.

down - The interface is de-activated or
there are faults preventing it from going to the
'up'-state.

u…
.1.3.6.1.4.1.8708.2.74.2.3.1.1.7
Denotes a reference to the corresponding aggregated link.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.8
Denotes a unique local host identifier for this link.
Derived from IKE peer local identity.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.9
Denotes the expected unique peer host identifier for the component link.
Same as IKE peer expected peer identity.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.10
Denotes the actual peer host identifier discovered by the system.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.11
Denotes the associated Dataplane link local unique identifier
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.12
Denotes the associated Dataplane link peer unique identifier.
Same as dataplane encryption expected peer identity.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.13
Denotes the actual peer link identifier discovered by the system.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.14
Link peer entity is not responding to PDUs.

alarm: link peer not responding.

ok: peer communication successfull.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.15
Mismatch in expected and discovered host identity.

alarm: peer host identity mismatch.

ok: valid peer host identity.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.16
Mismatch in expected and discovered link identity.

alarm: peer link identity mismatch.

ok: valid peer link identity.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
.1.3.6.1.4.1.8708.2.74.2.3.1.1.17