LUM-ACF-MIB

        The ACF MIB.
        
- General
- Control
- Candidate
- Active
    
Source file
LUM-ACF-MIB
Last revised
Identity
lumAcfMIBModule
Base OID
1.3.6.1.4.1.8708.1.1.75
Imported Objects
LUM-REG lumAcfMIB lumModules
LUM-TC AdminStatus CommandString FaultStatus
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the infinera MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-ACF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-ACF-MIB::lumAcfMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-ACF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-ACF-MIB::lumAcfMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (68)
.1.3.6.1.4.1.8708.1.1.75
.1.3.6.1.4.1.8708.2.75.1
.1.3.6.1.4.1.8708.2.75.1.1
.1.3.6.1.4.1.8708.2.75.1.2
.1.3.6.1.4.1.8708.2.75.2
.1.3.6.1.4.1.8708.2.75.2.1
.1.3.6.1.4.1.8708.2.75.2.1.1
.1.3.6.1.4.1.8708.2.75.2.1.10
.1.3.6.1.4.1.8708.2.75.2.1.2
.1.3.6.1.4.1.8708.2.75.2.1.3
.1.3.6.1.4.1.8708.2.75.2.1.4
.1.3.6.1.4.1.8708.2.75.2.1.5
.1.3.6.1.4.1.8708.2.75.2.1.6
.1.3.6.1.4.1.8708.2.75.2.1.7
.1.3.6.1.4.1.8708.2.75.2.1.8
.1.3.6.1.4.1.8708.2.75.2.1.9
.1.3.6.1.4.1.8708.2.75.2.2
Enumeration
.1.3.6.1.4.1.8708.2.75.2.2.1
Enumeration
.1.3.6.1.4.1.8708.2.75.2.2.2
Enumeration
.1.3.6.1.4.1.8708.2.75.2.2.3
Enumeration
.1.3.6.1.4.1.8708.2.75.2.2.4
.1.3.6.1.4.1.8708.2.75.2.2.5
Enumeration
.1.3.6.1.4.1.8708.2.75.2.2.6
Enumeration
.1.3.6.1.4.1.8708.2.75.2.2.7
Enumeration
.1.3.6.1.4.1.8708.2.75.2.2.8
.1.3.6.1.4.1.8708.2.75.2.2.9
.1.3.6.1.4.1.8708.2.75.2.3
.1.3.6.1.4.1.8708.2.75.2.3.1
.1.3.6.1.4.1.8708.2.75.2.3.1.1
.1.3.6.1.4.1.8708.2.75.2.3.1.1.1
.1.3.6.1.4.1.8708.2.75.2.3.1.1.10
.1.3.6.1.4.1.8708.2.75.2.3.1.1.11
.1.3.6.1.4.1.8708.2.75.2.3.1.1.12
.1.3.6.1.4.1.8708.2.75.2.3.1.1.13
.1.3.6.1.4.1.8708.2.75.2.3.1.1.14
.1.3.6.1.4.1.8708.2.75.2.3.1.1.15
.1.3.6.1.4.1.8708.2.75.2.3.1.1.16
.1.3.6.1.4.1.8708.2.75.2.3.1.1.17
.1.3.6.1.4.1.8708.2.75.2.3.1.1.18
.1.3.6.1.4.1.8708.2.75.2.3.1.1.2
.1.3.6.1.4.1.8708.2.75.2.3.1.1.3
.1.3.6.1.4.1.8708.2.75.2.3.1.1.4
.1.3.6.1.4.1.8708.2.75.2.3.1.1.5
.1.3.6.1.4.1.8708.2.75.2.3.1.1.6
.1.3.6.1.4.1.8708.2.75.2.3.1.1.7
.1.3.6.1.4.1.8708.2.75.2.3.1.1.8
.1.3.6.1.4.1.8708.2.75.2.3.1.1.9
.1.3.6.1.4.1.8708.2.75.2.4
.1.3.6.1.4.1.8708.2.75.2.4.1
.1.3.6.1.4.1.8708.2.75.2.4.1.1
.1.3.6.1.4.1.8708.2.75.2.4.1.1.1
.1.3.6.1.4.1.8708.2.75.2.4.1.1.10
.1.3.6.1.4.1.8708.2.75.2.4.1.1.11
.1.3.6.1.4.1.8708.2.75.2.4.1.1.12
.1.3.6.1.4.1.8708.2.75.2.4.1.1.13
.1.3.6.1.4.1.8708.2.75.2.4.1.1.14
.1.3.6.1.4.1.8708.2.75.2.4.1.1.15
.1.3.6.1.4.1.8708.2.75.2.4.1.1.16
.1.3.6.1.4.1.8708.2.75.2.4.1.1.17
.1.3.6.1.4.1.8708.2.75.2.4.1.1.18
.1.3.6.1.4.1.8708.2.75.2.4.1.1.2
.1.3.6.1.4.1.8708.2.75.2.4.1.1.3
.1.3.6.1.4.1.8708.2.75.2.4.1.1.4
.1.3.6.1.4.1.8708.2.75.2.4.1.1.5
.1.3.6.1.4.1.8708.2.75.2.4.1.1.6
.1.3.6.1.4.1.8708.2.75.2.4.1.1.7
.1.3.6.1.4.1.8708.2.75.2.4.1.1.8
.1.3.6.1.4.1.8708.2.75.2.4.1.1.9
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. LUM-REGinfinera
  3. SNMPv2-TCrfc
  4. LUM-TCinfinera
  5. SNMPv2-CONFrfc
  6. LUM-ACF-MIBinfineraselected
Type Definitions (9)
Enumeration
accept(1)
drop(2)
reject(3)
The action taken by access control filters
accept - Packet is allowed
drop - Packet is dropped
reject - Packet is dropped and an ICMP message is sent back
Enumeration
input(1)
The direction for the rule.

input - terminated and incoming in the node.
output - originating and outgoing from the node.
forward - forwarding between interfaces (passing through the node)
Enumeration
dcnMgmtVlan(1)
ppp(2)
all(3)
The type of interface to apply ACF Rule set to.

dcnMgmtVlan - Physical DCN ports, MGTM-VLAN and OSC ports in LAN mode
ppp - In-band management channels like iWDM, GCC and OSC
all - All of the above
Integer32 range: -1..65535
The port number is applicable for UDP and TCP protocols. Each port number defines a network service.
-1 means not used.
Integer32 range: 0..65534
The number of ports that the rule port number should be extended with. For example if port is set to
22 and the range is set to 2, port number 22-24 is applicable for the rule.
Integer32 range: 8..32
The prefix length combined with an IP address determines a network address space. Default is 32.
Enumeration
tcp(1)
udp(2)
icmp(3)
ospf(4)
all(5)
The type of protocol to apply access control filters (ACF) to
tcp - IP protocol number 6
udp - IP protocol number 17
icmp - IP protocol number 1
ospf - IP protocol number 89
all - All IP protocols
Enumeration
action(1)
policy(2)
The type of the rule.

action - 'normal' rule applied according to the sequence number

policy - the default rule of a given direction (input). It will be applied if
no action rule matches the packet. There can be maximum one policy per
direction. The default policy is 'accept'
Unsigned32 range: 1..10000
Defines the order rules are applied. The lowest sequence number is applied first.
Each action rule must have a unique sequence number. The sequence
number has no effect on policy rules.
Conformance Groups (4)
The general ACF MIB objects v1 (R33.0).
.1.3.6.1.4.1.8708.2.75.1.1.1
The acfControl group objects v1 (33.0).
.1.3.6.1.4.1.8708.2.75.1.1.2
The acfCandidate group objects v1 (33.0).
.1.3.6.1.4.1.8708.2.75.1.1.3
The acfActive group objects v1 (33.0).
.1.3.6.1.4.1.8708.2.75.1.1.4
Compliance Statements (1)

OID .1.3.6.1.4.1.8708.2.75.1.2.1
Basic implementation requirements for the ACF MIB V1 (33.0).
Required groups