LSI-megaRAID-SAS-IR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
21
Rows
21
Columns
246

adapterPropertiesTable

table optional
.1.3.6.1.4.1.3582.5.1.4.1.1.2 · 1 row entry · 24 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk adapterPropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::adapterPropertiesTable' 
A List of adapter Entries containing Information/Properties about the adapters.
adapterPropertiesEntry row .1.3.6.1.4.1.3582.5.1.4.1.1.2.1
An Entry in the adapter table.
Indexes
Column Syntax OID
adapterIDoptional
AdapterID for this Adapter.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.1
rebuildRateoptional
Rebuild rate on this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.2
reconstructionRateoptional
Reconstruction rate on this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.3
alarmStateoptional
Alarm is enabled(1) or disabled(0) on this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.4
cacheFlushIntervaloptional
Cache flush interval in seconds for this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.5
clusterStateoptional
Cluster is enabled(1) or disabled(0) on this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.6
predFailPollIntervaloptional
Number of seconds between predictive fail polls on this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.7
intThrottleCountoptional
Interrupt throttle active count on this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.8
intThrottleTimeUsoptional
Interrupt throttle completion hold time on this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.9
patrolReadRateoptional
Patrol Read Rate for this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.10
bgiRateoptional
Background initialization rate for this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.11
ccRateoptional
Consistency Check rate on this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.12
spinupDelayoptional
Number of seconds to delay among spinup groups for this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.13
spinupDriveCountoptional
Maximum number of drives to spin up at one time for this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.14
coercionModeoptional
Drive capacity coercion mode. 0->None; 1->128MB; 2->1GB; 3->Adaptive Coercion.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.15
disableAutoRebuildoptional
auto-rebuild and hot-spare commissioning status. 1->Disable , 0->Enable
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.16
disableBatteryWarningoptional
disable/enable warnings for missing battery or missing HW status. 1->Disable , 0->Enable
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.17
multipathSupportoptional
Multipath is supported or not supported on this adapter.Values: not supported(0),supported(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.18
ssdSMARTerEnabledoptional
Copyback to SSD on SMART error. Values Enabled(0),Disabled(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.19
sasAddroptional
This field gives the controller SAS address
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.20
auxilaryPowerPresentoptional
Presence of Auxilary Power
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.21
ddLifeCurveStatusoptional
Check for throttling
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.22
ddSSDLifeLeftoptional
Percentage of SSD life left
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.23
dDStatusoptional
Overall DD status
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.2.1.24

adapterInfoTable

table optional
.1.3.6.1.4.1.3582.5.1.4.1.1.3 · 1 row entry · 27 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk adapterInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::adapterInfoTable' 
A List of adapter Entries containing Information/Properties about the adapters.
adapterInfoEntry row .1.3.6.1.4.1.3582.5.1.4.1.1.3.1
An Entry in the adapterInfo table.
Indexes
Column Syntax OID
infAdpIDoptional
AdapterID for this Adapter.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.1
vendorIdoptional
PCI Vendor ID for this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.2
devIdoptional
PCI Device ID for this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.3
subVendorIDoptional
PCI Sub-Vendor ID for this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.4
subDevIDoptional
PCI Sub-Device ID for this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.5
hostInterfaceoptional
Host interface information for this adapter.
Values are as follows:
N/A(0), PCIX(1), PCIE(2), iSCSI(3), SAS_3G(4)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.6
hostInterfacePortCntoptional
Port Count on this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.7
hostInterfacePortAddroptional
Port address comma delimited
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.8
devInterfaceoptional
Multiple device interface support values separated by space.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.9
devInterfacePortCntoptional
Device Port Count on this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.10
devInterfacePortAddroptional
Device Port address comma delimited
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.11
productNameoptional
Product name e.g. SAS2008 B1.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.12
serialNooptional
Controller serial number
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.13
firmwareVersionoptional
Firmware version Format->(Firmware Package Version:Version:Date:Time)
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.14
driverVersionoptional
Driver version Format->(Driver Name:Version)
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.15
nvramSizeoptional
NVRAM size in KB for this adapter.A value -1 for invalid or undefined size.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.16
memorySizeoptional
Memory size in MB for this adapter.A value -1 for invalid or undefined size.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.17
flashSizeoptional
Flash size in MB for this adapter.A value -1 for invalid or undefined size.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.18
vdPresentCountoptional
Virtual devices present in this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.19
vdDegradedCountoptional
Number of virtual devices in this adapter that are critical
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.20
vdOfflineCountoptional
Number of virtual devices in this adapter that are offline
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.21
pdPresentCountoptional
Physical devices present in this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.22
pdDiskPresentCountoptional
Physical disk devices present in this adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.23
pdDiskPredFailureCountoptional
Number of disk devices in this adapter that are critical
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.24
pdDiskFailedCountoptional
Number of disk devices in this adapter that are failed
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.25
clusterStatusoptional
Cluster state on this adapter. Values: ACTIVE(1), INACTIVE(0)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.26
devInterfaceTypeoptional
Type of the interface of the IR adapter. Values: GEN1(0), GEN2(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.3.1.27

adapterSupportInfoTable

table optional
.1.3.6.1.4.1.3582.5.1.4.1.1.4 · 1 row entry · 19 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk adapterSupportInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::adapterSupportInfoTable' 
A List of  Entries containing Properties supported by the Controller.
adapterSupportInfoEntry row .1.3.6.1.4.1.3582.5.1.4.1.1.4.1
An Entry in the adapter table.
Indexes
Column Syntax OID
suAdpIDoptional
AdapterID for this Adapter.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.1
supportMaxArmsoptional
Maximum arms per Logical Drive supported for this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.2
supportMaxSpansoptional
Maximum spans per Logical Drive supported for this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.3
supportMaxArraysoptional
Maximum number arrays supported this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.4
supportMaxLDsoptional
Maximum number of Logical Drive's supported for this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.5
supportHardwarePresentoptional
Supported Hardware on this adapter. bbu(1),alarm(2),nvram(3),uart(4). For multiple hardware support a comma delimited list will appear.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.6
supportMaxConcurrentCmdsoptional
The maximum parallel commands supported on this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.7
supportMaxSGECountoptional
The maximum Scatter Gather Element count allowed on this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.8
supportMaxRequestSizeoptional
The maximum data transfer size in sectors, on this Adapter.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.9
supportClusterPermittedoptional
Clustering support on this Adapter. Values: FALSE(0), TRUE(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.10
supportMinStripeSizemandatory
Minimum stripe size supported. 0(512),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.11
supportMaxStripeSizemandatory
Maximum stripe size supported. 0(512),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.12
supportSupportsSASmandatory
SAS physical drive support.Values: notSupported(0), supported(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.13
supportSupportsSATAmandatory
SATA physical drive support.Values: notSupported(0), supported(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.14
supportAllowMixInEnclosuremandatory
Mix InEnclosure support.Values: notSupported(0), supported(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.15
supportAllowMixInVDmandatory
MixInVD support.Values: notSupported(0), supported(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.16
supportAllowSataInClustermandatory
SataInCluster support. Values: notSupported(0), supported(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.17
allowSSDMixInLDmandatory
allow SAS/SATA SSD mix within an LD. allow(1), not allow(0)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.18
allowMixSSDHDDInLDmandatory
allow SSD/HDD mix within an LD.allow(1), not allow(0)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.4.1.19

adpOperationsSupportInfoTable

table optional
.1.3.6.1.4.1.3582.5.1.4.1.1.5 · 1 row entry · 17 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk adpOperationsSupportInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::adpOperationsSupportInfoTable' 
A List of  Entries containing operations supported by the Controller.
adpOperationsSupportInfoEntry row .1.3.6.1.4.1.3582.5.1.4.1.1.5.1
An Entry in the adapter table.
Indexes
Column Syntax OID
opAdpIDoptional
AdapterID for this Adapter.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.1
rbldRateoptional
Rebuilding rate change support for this Adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.2
suCCRateoptional
Consistency Check rate change support for this Adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.3
suBgiRateoptional
Background initialization rate change support for this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.4
reconRateoptional
Reconstruction rate change support for this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.5
patrolRateoptional
Patrol read rate change support for this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.6
alarmControloptional
Alarm control support for this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.7
clusterSupportedoptional
Cluster support for this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.8
bbuoptional
BBU support for this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.9
spanningAllowedoptional
Spanning support for this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.10
dedicatedHotSparesoptional
Dedicated HotSpares for this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.11
revertibleHotSparesoptional
Revertible HotSpares support for this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.12
foreignConfigImportoptional
Support foreign config import on this adapter. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.13
selfDiagnosticoptional
Controller supports self diagnostic. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.14
allowMixedRedundancyOnArrayoptional
Allow different Virtual Disk on the same array to have different redundancy levels
Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.15
globalHotSparesoptional
Global hot spares are supported. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.16
oceWithNoDriveAdditionoptional
Online Capacity Expansion supported. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.5.1.17

driveOperationSupportTable

table optional
.1.3.6.1.4.1.3582.5.1.4.1.1.6 · 1 row entry · 4 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk driveOperationSupportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::driveOperationSupportTable' 
A List of operations supported by Physical Drive.
driveOperationSupportEntry row .1.3.6.1.4.1.3582.5.1.4.1.1.6.1
An Entry in the driveOperationSupport table.
Indexes
Column Syntax OID
drvAdpIDmandatory
Unique adapter ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.6.1.1
forceOnlinemandatory
Physical Drive force Online operation support
Values: notSupported(0), supported(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.6.1.2
forceOfflinemandatory
Physical Drive force Offline operation support
Values: notSupported(0), supported(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.6.1.3
forceRebuildmandatory
Physical Drive force Rebuild operation support
Values: notSupported(0), supported(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.6.1.4

vdOperationSupportTable

table optional
.1.3.6.1.4.1.3582.5.1.4.1.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk vdOperationSupportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::vdOperationSupportTable' 
A List operations supported by Virtual Drive
vdOperationSupportEntry row .1.3.6.1.4.1.3582.5.1.4.1.1.7.1
An Entry in the vdOperationSupport Table.
Indexes
Column Syntax OID
vdOpAdpIDmandatory
Unique adapter ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.7.1.1
readPolicymandatory
Read policy support. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.7.1.2
writePolicymandatory
Write policy support. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.7.1.3
ioPolicymandatory
IO policy support. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.7.1.4
accessPolicymandatory
Access policy support. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.7.1.5
diskCachePolicymandatory
Disk Cache Policy support. Values: False(0), True(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.1.7.1.6

bbuTable

table optional
.1.3.6.1.4.1.3582.5.1.4.1.2.2 · 1 row entry · 25 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk bbuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::bbuTable' 
A List of bbu Entries containing Information/Properties about the BBU.
bbuEntry row .1.3.6.1.4.1.3582.5.1.4.1.2.2.1
An Entry in the BBU table.
Indexes
Column Syntax OID
bbuIDoptional
BBUID for this BBU.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.1
batteryTypeoptional
BBU Type: Values: n/a(0), ibbu(1), bbu(2), zcr_legacy(3), itbbu3(4)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.2
nextLearnTimeoptional
Time of next scheduled lean cycle (seconds path 1/1/2000)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.3
absStateOfChargeoptional
Predicted remaining capacity expressed as % of DesignCapacity() (0-100). Value of -1 means not supported
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.4
fullChargeCapacityoptional
Predicted pack capacity when it is fully charged in mAh
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.5
averageEmptyTimeoptional
One-minute rolling average of the predicted remaining battery life. Value of -1 means not supported
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.6
cycleCountoptional
Number of charge cycles the battery has experienced. Value of -1 means not supported
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.7
firmwareStatusoptional
condition of battery in following order:
packMissing(0/1)
voltageLow(0/1)
temperatureHigh(0/1)
chargeActive(0/1)
dischargeActive(0/1)
learnCycleRequested(0/1)
learnCycle…
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.8
voltageoptional
Accurate battery terminal voltage in mV, resolution of 1mV
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.9
autoLearnPeriodoptional
Time (in seconds) between learn cycles (0 to disable auto learn)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.10
relStateOfChargeoptional
Predicted remaining capacity expressed as % of FullChargeCapacity() (0-100). Value of -1 means not supported
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.11
capacityRemainoptional
Predicted charge or energy remaining in the battery in mAh
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.12
runTimeToEmptyoptional
(in minutes)Relative gain or loss in remaining life in response to change in power policy. Value of -1 means not supported
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.13
avgTimeToFulloptional
One-minute rolling average of predicted remaining time to full charge. Value of -1 means not supported
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.14
errorMarginoptional
Expected margin of error (%) in charge calculation (2-100). Value of -1 means not supported
Integer32
Constraints:
range: 2-100
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.15
temperatureoptional
Battery temperature in degree Centigrade
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.16
mfgNameoptional
Battery manufacturer's name
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.17
deviceNameoptional
Battery name
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.18
serialNumberoptional
Battery serialNumber
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.19
chargerStatusoptional
Battery charger status. Values: N/A(-1), off(0), complete(1), progress(2)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.20
adpIDoptional
The adapter id where BBU is attached
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.21
remainingCapAlarmoptional
Remaining capacity to alarm. Value of -1 means not supported
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.22
remainingTimeAlarmoptional
Remaining time to alarm. Value of -1 means not supported
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.23
bbu-currentoptional
Current(In mA) being supplied (or accepted) through the terminals of the battery
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.24
gasGaugeStatusoptional
Gas guage status
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.1.2.2.1.25

pdTable

table optional
.1.3.6.1.4.1.3582.5.1.4.2.1.2 · 1 row entry · 40 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk pdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::pdTable' 
A List of physicalDrive Entries containing Information/Properties about the drives
pdEntry row .1.3.6.1.4.1.3582.5.1.4.2.1.2.1
An Entry in the Device Table.
Indexes
Column Syntax OID
pdIndexoptional
The unique ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.1
physDevIDoptional
The Device ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.2
oemSupportedoptional
Drive support by the OEM (OEM-specific checks)
Values: notSupported(1), supported(0)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.3
scsiDevTypeoptional
Type of this Device. Values:
disk(0), tape(1), printer(2), processor(3), cdrom(5), scanner(6),
optical(7), enclosure(13), dvd(10), unknown(31)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.4
connectedAdapterPortoptional
Adapter port to which the device is connected.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.5
deviceSpeedoptional
Maximum supported speed. Values:
speed_unknown(0), speed_1p5G(1), speed_3G(2),speed_6G(3)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.6
mediaErrCountoptional
Error count of the device
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.7
otherErrCountoptional
other error count of the device
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.8
predFailCountoptional
Predictive fail count of the device
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.9
pdStateoptional
Firmware's interpretation of drive state. Values:
unconfigured_good(0), unconfigured_bad(1), hot_spare(2), offline(16), failed(17), rebuild(20), online(24),copyback(32),system(64)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.10
disabledForRemovaloptional
If true, drive is ready for removal. Values: false(0), true(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.11
linkSpeedoptional
Negotiated link speed. Values: speed_unknown(0), speed_1p5G(1), speed_3G(2), speed_6G(3)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.12
pdSupportFlagsoptional
1st Byte:forcedPDGUID(0/1),2nd Byte:inVD(0/1),3rd Byte:isGlobalSpare(0/1),4th Byte:isSpare(0/1),5th Byte:isForeign(0/1),6th Byte:intf(0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC).A comma delimited list will appear.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.13
pdSasAddroptional
Device SAS addresses. Comma separeted for multiple address
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.14
rawSizeoptional
Size(MB) before COD and coercion
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.15
nonCoercedSizeoptional
Size(MB) after COD is reserved but before coercion
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.16
coercedSizeoptional
Size(MB) after COD is reserved and after coercion
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.17
enclDeviceIdoptional
Enclosure's device Id (in decimal); if device is not within enclosure value is -1
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.18
enclIndexoptional
Firmware internal enclosure index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.19
slotNumberoptional
Slot number of this drive, if this Physical Drive is an enclosure then -1
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.20
pdOperationProgressoptional
% Progress is %. e.g. Rebuild progress is 10%
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.21
pdAdpIDoptional
Controller id where this Physical Drive is attached
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.22
operationSupportoptional
Online,Offline,Failed,Bad,Uncofigured good,Unconfigured bad,
Spare,Spare,replaceMissing,markMissing,startRebuild,stopRebuild,
locate,stopSecureEraseNonSED,FWDownloadAllowed
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.23
vendorIDoptional
Vendor ID
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.24
productIDoptional
Product ID
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.25
pdFwversionoptional
Physical drive firmware version
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.26
pdSerialNumberoptional
Physical drive serial number
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.27
diskTypeoptional
Type of the disk : 0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.28
partnerDevIdoptional
If drive is in an enclosure with dual paths,This is Partner Device ID.
In all other cases INVALID(-1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.29
mediatypeoptional
Media Type HDD(0),SSD(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.30
oemCertifiedoptional
Indicates whether device is certified(0) or not(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.31
pdTemperatureoptional
Physical Drive temperature in Celsius
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.32
piTypeoptional
SAS Protection Information Type .No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Type 3(3) ,Reserved SAS PI Type 4(4) ,Reserved SAS PI Type 5(5) ,Reserved SAS PI Type 6(6) ,Reserved SAS PI Typ…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.33
userDataBlockSizeoptional
Number of bytes of user data in LBA
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.34
cageoptional
Current Cage that holds the SSD
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.35
locationoptional
Current location of SSD 0 - Upper, 1 - Lower
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.36
whtemperatureoptional
Temperature of each SSD
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.37
flashTypeoptional
Flash Type being used (SLC / MLC / EMLC)
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.38
lifeCurveStatusoptional
100 - No throttling being done, 90 - SSD is being throttled
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.39
sSDLifeLeftoptional
Percentage of SSD life left
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.2.1.2.1.40

vdTable

table optional
.1.3.6.1.4.1.3582.5.1.4.3.1.2 · 1 row entry · 20 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk vdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::vdTable' 
A List of Virtual Drive Entries containing Information/Properties about the virtualDrive.
vdEntry row .1.3.6.1.4.1.3582.5.1.4.3.1.2.1
An Entry in the virtualDrive Table.
Indexes
Column Syntax OID
virtualDevIDoptional
The unique Virtual Drive ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.1
sizeoptional
Total size in MB of the drive
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.2
clusterOwnerDeviceIdoptional
Virtual Drive owner's device Id
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.3
targetIdoptional
Virtual Drive target id (i.e. 0 to 63)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.4
stateoptional
Virtual Drive state. Values: offline(0), partially_degraded(1), degraded(2), optimal(3)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.5
nameoptional
Virtual Drive name
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.6
defaultCachePolicyoptional
Default cache policy settings. Values: direct_io(0), cached_io(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.7
vdAccessPolicyoptional
Access policy settings. Values: access_rw(0), access_read_only(2), access_blocked(3)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.8
vdDiskCachePolicyoptional
Physical disk cache policy. Values: enable(1), disable(2)
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.9
bgiStateoptional
BGI state on this VD. Values disable(1), enable(0)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.10
prloptional
Primay raid level. Values: 0(RAID-0), 1(RAID-1), 3(RAID-3), 4(RAID-4), 5(RAID-5), 6(RAID-6),15(Single Disk or JBOD),
17(RAID-1E/10), 21(RAID-5E), 31(Concatenation),37(RAID-5EEE)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.11
rLQoptional
Raid level qualifier
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.12
sRLoptional
Secondary raid level. Values: 0(Stripped), 1(Mirrored), 2(Concatenated), 3(Spanned), -1(Not Supported for IR2)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.13
stripeSizeoptional
Stripe Size. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.14
numDrivesoptional
Number of drivers per span
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.15
spanDepthoptional
Number of spans. If only one array then it is considered as 1 span
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.16
initStateoptional
0=no init, 1=quick init, 2=full init
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.17
currentCachePolicyoptional
Default cache policy settings. Values: direct_io(0), cached_io(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.18
operationProgressoptional
Progress % for operation x/ No operation in progress
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.19
vdAdpIDoptional
Controller id where this vd is present
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.1.2.1.20

vdSpanTable

table optional
.1.3.6.1.4.1.3582.5.1.4.3.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk vdSpanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::vdSpanTable' 
A List of span Entries containing Information/Properties vd span.
vdSpanEntry row .1.3.6.1.4.1.3582.5.1.4.3.2.2.1
An Entry in the vdSpan Table.
Indexes
Column Syntax OID
spanIDoptional
The unique Span ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.2.2.1.1
vDevIDoptional
The Virtual Device ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.2.2.1.2
startBlockoptional
Span physical disk starting block
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.2.2.1.3
numBlocksoptional
Span physical disk block count
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.3.2.2.1.4
vdsArrayRefoptional
Array reference (index)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.2.2.1.5
spAdpIdoptional
Adapter where the span will be found
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.2.2.1.6

arrayTable

table optional
.1.3.6.1.4.1.3582.5.1.4.3.3.2 · 1 row entry · 6 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk arrayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::arrayTable' 
A List of array Entries containing Information/Properties about the arrays.
arrayEntry row .1.3.6.1.4.1.3582.5.1.4.3.3.2.1
An Entry in the array Table.
Indexes
Column Syntax OID
arrayIDoptional
The unique array ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.3.2.1.1
arrSizeoptional
Size in MB
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.3.2.1.2
arrNumDrivesoptional
Number of drives for this array
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.3.2.1.3
arrayRefoptional
Tag for the array
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.3.2.1.4
pdListoptional
Space separated pd identification. e.g. {devID devID devID} etc
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.3.3.2.1.5
arrAdpIdoptional
Adapter where the array will be found
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.3.2.1.6

spareTable

table optional
.1.3.6.1.4.1.3582.5.1.4.3.4.2 · 1 row entry · 6 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk spareTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::spareTable' 
A List of sparepool Entries containing Information/Properties about the spare drive
spareEntry row .1.3.6.1.4.1.3582.5.1.4.3.4.2.1
An Entry in the sparepool Table.
Indexes
Column Syntax OID
spareIDoptional
The unique Index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.4.2.1.1
deviceIdentificationoptional
The Device ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.4.2.1.2
spareTypeoptional
Spare type. isDedicated(0/1)isRevertible(0/1)isEnclAffinity(0/1). 1 implies particular feature is enable and 0 represent feature is disable.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.3.4.2.1.3
arrayCountoptional
The number of arrays to which the PD can be dedicated
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.4.2.1.4
arrRefoptional
Comma separated array ids. e.g. 2,4,5 etc
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.3.4.2.1.5
sprAdpIdoptional
Adapter where the spare will be found
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.3.4.2.1.6

enclosureTable

table optional
.1.3.6.1.4.1.3582.5.1.4.4.1.2 · 1 row entry · 13 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk enclosureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::enclosureTable' 
A List of enclosure Entries containing Information/Properties about the enclosures in the system.
enclosureEntry row .1.3.6.1.4.1.3582.5.1.4.4.1.2.1
An Entry in the enclosure table.
Indexes
Column Syntax OID
enclosureIDoptional
EnclosureID for this enclosure.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.1
deviceIdoptional
Enclosure device Id.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.2
enclosureIndexoptional
Firmware internal enclosure index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.3
slotCountoptional
Number of slots
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.4
psCountoptional
Number of power supplies
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.5
fanCountoptional
Number of fans
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.6
tempSensorCountoptional
Number of temperature sensors
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.7
alarmCountoptional
Number of alarms
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.8
simCountoptional
Number of SIM modules
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.9
isFaultoptional
Enclosure has entered a FAULT state or not. Values: false(0), true(1)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.10
pdCountoptional
Number of physical drives present
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.11
pdIdsoptional
Physical drive deviceId's comma separated.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.12
encAdpIDoptional
Adapter ID where this enclosure is connected
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.1.2.1.13

enclosureFanTable

table optional
.1.3.6.1.4.1.3582.5.1.4.4.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk enclosureFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::enclosureFanTable' 
A List of fan Entries containing Information/Properties about the enclosureFan.
enclosureFanEntry row .1.3.6.1.4.1.3582.5.1.4.4.2.2.1
An Entry in the enclosureFan table.
Indexes
Column Syntax OID
fanIDoptional
ID for this enclosureFan.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.2.2.1.1
enclosureIdoptional
Enclosure ID where the fan is attached
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.2.2.1.2
fanStatusoptional
status of the device
Enumeration
Enumerated Values:
1status-ok
2status-critical
3status-nonCritical
4status-unrecoverable
5status-not-installed
6status-unknown
7status-not-available
 .1.3.6.1.4.1.3582.5.1.4.4.2.2.1.3

enclosureSlotTable

table optional
.1.3.6.1.4.1.3582.5.1.4.4.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk enclosureSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::enclosureSlotTable' 
A List of slot Entries containing Information/Properties about the enclosure slots.
enclosureSlotEntry row .1.3.6.1.4.1.3582.5.1.4.4.3.2.1
An Entry in the enclosureSlot table.
Indexes
Column Syntax OID
slotIDoptional
ID for this slot.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.3.2.1.1
sltEncIdoptional
Enclosure ID where the slot
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.3.2.1.2
slotStatusoptional
status of the device. Values: status-ok(1), status-critical(2),
status-nonCritical(3), status-unrecoverable(4), status-not-installed(5), status-unknown(6), status-not-available(7)
Enumeration
Enumerated Values:
1status-ok
2status-critical
3status-nonCritical
4status-unrecoverable
5status-not-installed
6status-unknown
7status-not-available
 .1.3.6.1.4.1.3582.5.1.4.4.3.2.1.3

enclosurePSTable

table optional
.1.3.6.1.4.1.3582.5.1.4.4.4.2 · 1 row entry · 3 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk enclosurePSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::enclosurePSTable' 
A List of powerSupply Entries containing Information/Properties about the enclosure powerSupply
enclosurePSEntry row .1.3.6.1.4.1.3582.5.1.4.4.4.2.1
An Entry in the powerSupply table.
Indexes
Column Syntax OID
powerSupplyIDoptional
ID for this powerSupply.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.4.2.1.1
psEnclosureIdoptional
Enclosure id for the powerSupply
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.4.2.1.2
powerSupplyStatusoptional
status of the power Supply
Enumeration
Enumerated Values:
1status-ok
2status-critical
3status-nonCritical
4status-unrecoverable
5status-not-installed
6status-unknown
7status-not-available
 .1.3.6.1.4.1.3582.5.1.4.4.4.2.1.3

enclosureTSTable

table optional
.1.3.6.1.4.1.3582.5.1.4.4.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk enclosureTSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::enclosureTSTable' 
A List of TempSensor Entries containing Information/Properties about the enclosure TempSensor
enclosureTSEntry row .1.3.6.1.4.1.3582.5.1.4.4.5.2.1
An Entry in the adapter table.
Indexes
Column Syntax OID
tempSensorIDoptional
ID for this TempSensor.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.5.2.1.1
encIdoptional
enclosure id for this TempSensor
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.5.2.1.2
tempSensorStatusoptional
status of this tempSensor
Enumeration
Enumerated Values:
1status-ok
2status-critical
3status-nonCritical
4status-unrecoverable
5status-not-installed
6status-unknown
7status-not-available
 .1.3.6.1.4.1.3582.5.1.4.4.5.2.1.3
tsTemperatureoptional
Current temperature in degree Centigrade
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.5.2.1.4

enclosureAlarmTable

table optional
.1.3.6.1.4.1.3582.5.1.4.4.6.2 · 1 row entry · 3 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk enclosureAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::enclosureAlarmTable' 
A List of Alarm Entries containing Information/Properties about enclosure Alarms
enclosureAlarmEntry row .1.3.6.1.4.1.3582.5.1.4.4.6.2.1
An Entry in the enclosureAlarm table.
Indexes
Column Syntax OID
alarmIDoptional
ID for this Alarm.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.6.2.1.1
almEnclosureIdoptional
Enclosure id where the Alarm is attached
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.6.2.1.2
alarmStatusoptional
Status of the alarm
Enumeration
Enumerated Values:
1status-ok
2status-critical
3status-nonCritical
4status-unrecoverable
5status-not-installed
6status-unknown
7status-not-available
 .1.3.6.1.4.1.3582.5.1.4.4.6.2.1.3

enclosureSIMTable

table optional
.1.3.6.1.4.1.3582.5.1.4.4.7.2 · 1 row entry · 3 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk enclosureSIMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::enclosureSIMTable' 
A List of SIM Entries containing Information/Properties about enclosure SIMs
enclosureSIMEntry row .1.3.6.1.4.1.3582.5.1.4.4.7.2.1
An Entry in the enclosureSIM table.
Indexes
Column Syntax OID
simIDoptional
ID for this SIM.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.7.2.1.1
simEnclosureIdoptional
Enclosure id where the SIM is attached
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.4.7.2.1.2
simStatusoptional
Number of Logical Drives Configured on this Adapter.
Enumeration
Enumerated Values:
1status-ok
2status-critical
3status-nonCritical
4status-unrecoverable
5status-not-installed
6status-unknown
7status-not-available
 .1.3.6.1.4.1.3582.5.1.4.4.7.2.1.3

phyTable

table optional
.1.3.6.1.4.1.3582.5.1.4.5.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk phyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::phyTable' 
A List of phy Entries containing Information/Properties about the sas topology in the system.
phyEntry row .1.3.6.1.4.1.3582.5.1.4.5.1.2.1
An Entry in the Phy table.
Indexes
Column Syntax OID
phyIndexoptional
Index for this phy.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.1.2.1.1
deviceIndexoptional
Index of the device in tDeviceTable where the phy is attached
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.1.2.1.2
deviceTypeoptional
Type of device attached to this phy NO_DEVICE = 0, IOC(1), EDGE_EXPANDER(2), FANOUT_EXPANDER(3),END_DEVICE(4)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.1.2.1.3
phyIDoptional
The phy ID of the attached device
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.1.2.1.4
deviceOffsetoptional
The memory offset where the node of the device that is attached to this phy starts.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.1.2.1.5
phyPosoptional
Position of the Phy in device attached.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.1.2.1.6

tDeviceTable

table optional
.1.3.6.1.4.1.3582.5.1.4.5.2.2 · 1 row entry · 8 columns
Open in standard view
Uses the lsi variant from /opt/observium/mibs/lsi.
Command help
Walk tDeviceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LSI-megaRAID-SAS-IR-MIB' -M '/opt/observium/mibs/lsi:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LSI-megaRAID-SAS-IR-MIB::tDeviceTable' 
A List of device Entries containing Information/Properties about the sas topology in the system.
tDeviceEntry row .1.3.6.1.4.1.3582.5.1.4.5.2.2.1
An Entry in the tDevice table.
Indexes
Column Syntax OID
tDeviceIndexoptional
Index for this device.(Unique)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.2.2.1.1
contIDoptional
Adapter ID where this device is attached
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.2.2.1.2
tDeviceIdoptional
Device ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.2.2.1.3
tDeviceTypeoptional
NO_DEVICE = 0, IOC(1), EDGE_EXPANDER(2), FANOUT_EXPANDER(3),END_DEVICE(4)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.2.2.1.4
tParentIndexoptional
Index of the parent device in the table where this device is connected. -1 if it root device.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.2.2.1.5
tNumPhyoptional
Total no of Phy present in this device
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3582.5.1.4.5.2.2.1.6
tSASAddroptional
Device SAS addresses. Comma separeted for multiple address
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.5.2.2.1.7
tDevDescriptionoptional
Detailed description of the Device.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3582.5.1.4.5.2.2.1.8