LOWPAN-MIB

        The MIB module for monitoring nodes implementing the IPv6
over Low-Power Wireless Personal Area Networks (6LoWPAN)
protocol.
        
Copyright (c) 2014 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
    
Source file
LOWPAN-MIB
Last revised
Identity
lowpanMIB
Base OID
1.3.6.1.2.1.226
Imported Objects
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LOWPAN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LOWPAN-MIB::lowpanMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LOWPAN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LOWPAN-MIB::lowpanMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (67)
.1.3.6.1.2.1.226
.1.3.6.1.2.1.226.0
.1.3.6.1.2.1.226.1
.1.3.6.1.2.1.226.1.1
.1.3.6.1.2.1.226.1.1.1
.1.3.6.1.2.1.226.1.1.10
.1.3.6.1.2.1.226.1.1.11
.1.3.6.1.2.1.226.1.1.12
.1.3.6.1.2.1.226.1.1.13
.1.3.6.1.2.1.226.1.1.14
.1.3.6.1.2.1.226.1.1.15
.1.3.6.1.2.1.226.1.1.16
.1.3.6.1.2.1.226.1.1.17
.1.3.6.1.2.1.226.1.1.18
.1.3.6.1.2.1.226.1.1.19
.1.3.6.1.2.1.226.1.1.2
.1.3.6.1.2.1.226.1.1.20
.1.3.6.1.2.1.226.1.1.21
.1.3.6.1.2.1.226.1.1.22
.1.3.6.1.2.1.226.1.1.23
.1.3.6.1.2.1.226.1.1.24
.1.3.6.1.2.1.226.1.1.25
.1.3.6.1.2.1.226.1.1.26
.1.3.6.1.2.1.226.1.1.27
.1.3.6.1.2.1.226.1.1.28
.1.3.6.1.2.1.226.1.1.29
.1.3.6.1.2.1.226.1.1.3
.1.3.6.1.2.1.226.1.1.4
.1.3.6.1.2.1.226.1.1.5
.1.3.6.1.2.1.226.1.1.6
.1.3.6.1.2.1.226.1.1.7
.1.3.6.1.2.1.226.1.1.8
.1.3.6.1.2.1.226.1.1.9
.1.3.6.1.2.1.226.1.2
.1.3.6.1.2.1.226.1.2.1
.1.3.6.1.2.1.226.1.2.1.1
.1.3.6.1.2.1.226.1.2.1.10
.1.3.6.1.2.1.226.1.2.1.11
.1.3.6.1.2.1.226.1.2.1.12
.1.3.6.1.2.1.226.1.2.1.13
.1.3.6.1.2.1.226.1.2.1.14
.1.3.6.1.2.1.226.1.2.1.15
.1.3.6.1.2.1.226.1.2.1.16
.1.3.6.1.2.1.226.1.2.1.17
.1.3.6.1.2.1.226.1.2.1.18
.1.3.6.1.2.1.226.1.2.1.19
.1.3.6.1.2.1.226.1.2.1.2
.1.3.6.1.2.1.226.1.2.1.20
.1.3.6.1.2.1.226.1.2.1.21
.1.3.6.1.2.1.226.1.2.1.22
.1.3.6.1.2.1.226.1.2.1.23
.1.3.6.1.2.1.226.1.2.1.24
.1.3.6.1.2.1.226.1.2.1.25
.1.3.6.1.2.1.226.1.2.1.26
.1.3.6.1.2.1.226.1.2.1.27
.1.3.6.1.2.1.226.1.2.1.28
.1.3.6.1.2.1.226.1.2.1.29
.1.3.6.1.2.1.226.1.2.1.3
.1.3.6.1.2.1.226.1.2.1.4
.1.3.6.1.2.1.226.1.2.1.5
.1.3.6.1.2.1.226.1.2.1.6
.1.3.6.1.2.1.226.1.2.1.7
.1.3.6.1.2.1.226.1.2.1.8
.1.3.6.1.2.1.226.1.2.1.9
.1.3.6.1.2.1.226.2
.1.3.6.1.2.1.226.2.1
.1.3.6.1.2.1.226.2.2
Dependencies (6) 3 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. LOWPAN-MIBrfcselected
Conformance Groups (4)
A collection of objects providing information and
statistics about the processing of 6LoWPAN datagrams,
excluding counters covering the processing of datagrams
with a MESH header.
.1.3.6.1.2.1.226.2.1.1
A collection of objects providing information and
statistics about the processing of 6LoWPAN datagrams
with a MESH header.
.1.3.6.1.2.1.226.2.1.2
A collection of objects providing per-interface
information and statistics about the processing
of 6LoWPAN datagrams, excluding counters covering
the processing of datagrams with a MESH header.
.1.3.6.1.2.1.226.2.1.3
A collection of objects providing per-interface
information and statistics about the processing
of 6LoWPAN datagrams with a MESH header.
.1.3.6.1.2.1.226.2.1.4
Compliance Statements (1)

OID .1.3.6.1.2.1.226.2.2.1
Compliance statement for systems that implement 6LoWPAN.
Required groups
mandatory lowpanStatsGroup
optional lowpanStatsMeshGroup This group is mandatory for implementations that process
or forward 6LoWPAN datagrams with a MESH header.
optional lowpanIfStatsGroup This group is mandatory for implementations that expose
per-interface statistics.
optional lowpanIfStatsMeshGroup This group is mandatory for implementations that expose
per-interface statistics and that process or forward
6LoWPAN datagrams with a MESH header.