LLDP-EXT-MED-MIB Table View

A table that controls selection of LLDP TLVs to be transmitted
on individual ports.

lldpXMedPortConfigEntry row .1.0.8802.1.1.2.1.5.4795.1.1.2.1

LLDP configuration information that controls the
transmission of the MED organizationally defined TLVs on
LLDP transmission capable ports.

This configuration object augments the lldpPortConfigEntry of
the L…

Indexes

No indexes recorded

Column	Syntax	OID
lldpXMedPortCapSupported The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible for the respective port on the LLDP agent of the device. Each bit in the bitmap corresponds to an LLDP-MED subtype ass…	LldpXMedCapabilities Type Values: 0 capabilities 1 networkPolicy 2 location 3 extendedPSE 4 extendedPD 5 inventory	.1.0.8802.1.1.2.1.5.4795.1.1.2.1.1
lldpXMedPortConfigTLVsTxEnable The lldpXMedPortConfigTLVsTxEnable, defined as a bitmap, includes the MED organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitma…	LldpXMedCapabilitiesr/w Type Values: 0 capabilities 1 networkPolicy 2 location 3 extendedPSE 4 extendedPD 5 inventory	.1.0.8802.1.1.2.1.5.4795.1.1.2.1.2
lldpXMedPortConfigNotifEnable A value of 'true(1)' enables sending the topology change traps on this port. A value of 'false(2)' disables sending the topology change traps on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.0.8802.1.1.2.1.5.4795.1.1.2.1.3

This table contains one row per policy type per port
of media policy information (as a part of the MED
organizational extension) on the local system known
to this agent.

lldpXMedLocMediaPolicyEntry row .1.0.8802.1.1.2.1.5.4795.1.2.1.1

Information about a particular policy on a specific
port component.

Indexes

LLDP-MIBlldpLocPortNum lldpXMedLocMediaPolicyAppType

Column	Syntax	OID
lldpXMedLocMediaPolicyAppType The media type that defines the primary function of the application for the policy advertised by an endpoint.	PolicyAppType Type Values: 0 unknown 1 voice 2 voiceSignaling 3 guestVoice 4 guestVoiceSignaling 5 softPhoneVoice 6 videoconferencing 7 streamingVideo 8 videoSignaling	.1.0.8802.1.1.2.1.5.4795.1.2.1.1.1
lldpXMedLocMediaPolicyVlanID An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used if the device is using…	Integer32 Constraints: range: 0-4095	.1.0.8802.1.1.2.1.5.4795.1.2.1.1.2
lldpXMedLocMediaPolicyPriority This object contains the value of the 802.1p priority which is associated with the given port on the local system.	Integer32 Constraints: range: 0-7	.1.0.8802.1.1.2.1.5.4795.1.2.1.1.3
lldpXMedLocMediaPolicyDscp This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the local system.	Dscp Type Constraints: range: 0..63	.1.0.8802.1.1.2.1.5.4795.1.2.1.1.4
lldpXMedLocMediaPolicyUnknown A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' ind…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.0.8802.1.1.2.1.5.4795.1.2.1.1.5
lldpXMedLocMediaPolicyTagged A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN ope…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.0.8802.1.1.2.1.5.4795.1.2.1.1.6

This table contains Location information as advertised
by the local system.
          
The information may be configured per port by a Location
Information Server (LIS) or other management application.
          
Multiple Location TLVs of different subtypes may be transmitted
in the same PDU.
          
The information in this table MUST be stored in non-volatile-memory
and persist over restart/reboot sequences.

lldpXMedLocLocationEntry row .1.0.8802.1.1.2.1.5.4795.1.2.9.1

Information about Location information for the local device.

Indexes

LLDP-MIBlldpLocPortNum lldpXMedLocLocationSubtype

Column	Syntax	OID
lldpXMedLocLocationSubtype The location subtype advertised by the local device.	LocationSubtype Type Values: 1 unknown 2 coordinateBased 3 civicAddress 4 elin	.1.0.8802.1.1.2.1.5.4795.1.2.9.1.1
lldpXMedLocLocationInfo The location information. Parsing of this information is dependent upon the location subtype, as defined by the value of the lldpXMedLocLocationSubtype object.	OctetStringr/w Constraints: range: 0-256	.1.0.8802.1.1.2.1.5.4795.1.2.9.1.2

This table contains one row per port of PSE PoE
information on the local system known to this agent.

lldpXMedLocXPoEPSEPortEntry row .1.0.8802.1.1.2.1.5.4795.1.2.11.1

Information about a particular port PoE information.

Indexes

LLDP-MIBlldpLocPortNum

Column	Syntax	OID
lldpXMedLocXPoEPSEPortPowerAv This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts.	tenth of wattUnsigned32 Constraints: range: 0-1023	.1.0.8802.1.1.2.1.5.4795.1.2.11.1.1
lldpXMedLocXPoEPSEPortPDPriority Reflects the PD power priority that is being advertised on this PSE port. If both locally configure priority and ldpXMedRemXPoEPDPowerPriority are available on this port, it is a matter of local policy wh…	Enumeration Enumerated Values: 1 unknown 2 critical 3 high 4 low	.1.0.8802.1.1.2.1.5.4795.1.2.11.1.2

A table that displays LLDP-MED capabilities of remote devices
connected to individual ports.

lldpXMedRemCapabilitiesEntry row .1.0.8802.1.1.2.1.5.4795.1.3.1.1

LLDP-MED capabilities of remote devices connected to the device
ports and communicating via LLDP-MED.

The remote tables in the LLDP-MED MIB excepting this table may be
sparsely populate. An entry in one of …

Indexes

LLDP-MIBlldpRemTimeMark LLDP-MIBlldpRemLocalPortNum LLDP-MIBlldpRemIndex

Column	Syntax	OID
lldpXMedRemCapSupported The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subty…	LldpXMedCapabilities Type Values: 0 capabilities 1 networkPolicy 2 location 3 extendedPSE 4 extendedPD 5 inventory	.1.0.8802.1.1.2.1.5.4795.1.3.1.1.1
lldpXMedRemCapCurrent The bitmap includes the MED organizationally defined set of LLDP TLVs whose transmission is possible on the LLDP agent of the remote device connected to this port. Each bit in the bitmap corresponds to an LLDP-MED subty…	LldpXMedCapabilities Type Values: 0 capabilities 1 networkPolicy 2 location 3 extendedPSE 4 extendedPD 5 inventory	.1.0.8802.1.1.2.1.5.4795.1.3.1.1.2
lldpXMedRemDeviceClass Device Class as advertised by the device remotely connected to the port.	LldpXMedDeviceClass Type Values: 0 notDefined 1 endpointClass1 2 endpointClass2 3 endpointClass3 4 networkConnectivity	.1.0.8802.1.1.2.1.5.4795.1.3.1.1.3

This table contains media policy information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the networkPolicy(0) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.

lldpXMedRemMediaPolicyEntry row .1.0.8802.1.1.2.1.5.4795.1.3.2.1

Information about the per port per policy type policy
information for a particular physical network connection.

Indexes

LLDP-MIBlldpRemTimeMark LLDP-MIBlldpRemLocalPortNum LLDP-MIBlldpRemIndex lldpXMedRemMediaPolicyAppType

Column	Syntax	OID
lldpXMedRemMediaPolicyAppType The media type that defines the primary function of the application for the policy advertised by the endpoint connected remotely to this port.	PolicyAppType Type Values: 0 unknown 1 voice 2 voiceSignaling 3 guestVoice 4 guestVoiceSignaling 5 softPhoneVoice 6 videoconferencing 7 streamingVideo 8 videoSignaling	.1.0.8802.1.1.2.1.5.4795.1.3.2.1.1
lldpXMedRemMediaPolicyVlanID An extension of the VLAN Identifier for the remote system connected to this port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shal…	Integer32 Constraints: range: 0-4095	.1.0.8802.1.1.2.1.5.4795.1.3.2.1.2
lldpXMedRemMediaPolicyPriority This object contains the value of the 802.1p priority which is associated with the remote system connected at given port.	Integer32 Constraints: range: 0-7	.1.0.8802.1.1.2.1.5.4795.1.3.2.1.3
lldpXMedRemMediaPolicyDscp This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with remote system connected at the port.	Dscp Type Constraints: range: 0..63	.1.0.8802.1.1.2.1.5.4795.1.3.2.1.4
lldpXMedRemMediaPolicyUnknown A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the DSCP value fields are ignored. A value of 'false' ind…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.0.8802.1.1.2.1.5.4795.1.3.2.1.5
lldpXMedRemMediaPolicyTagged A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is using an untagged VLAN or does not support port based VLAN ope…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.0.8802.1.1.2.1.5.4795.1.3.2.1.6

This table contains inventory information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the inventory(2) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.

lldpXMedRemInventoryEntry row .1.0.8802.1.1.2.1.5.4795.1.3.3.1

Information about inventory information for the remote devices
connected to the ports.

Indexes

LLDP-MIBlldpRemTimeMark LLDP-MIBlldpRemLocalPortNum LLDP-MIBlldpRemIndex

Column	Syntax	OID
lldpXMedRemHardwareRev The vendor-specific hardware revision string as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.0.8802.1.1.2.1.5.4795.1.3.3.1.1
lldpXMedRemFirmwareRev The vendor-specific firmware revision string as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.0.8802.1.1.2.1.5.4795.1.3.3.1.2
lldpXMedRemSoftwareRev The vendor-specific software revision string as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.0.8802.1.1.2.1.5.4795.1.3.3.1.3
lldpXMedRemSerialNum The vendor-specific serial number as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.0.8802.1.1.2.1.5.4795.1.3.3.1.4
lldpXMedRemMfgName The vendor-specific manufacturer name as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.0.8802.1.1.2.1.5.4795.1.3.3.1.5
lldpXMedRemModelName The vendor-specific model name as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.0.8802.1.1.2.1.5.4795.1.3.3.1.6
lldpXMedRemAssetID The vendor-specific asset tracking identifier as advertised by the remote endpoint.	OctetString Constraints: range: 0-32	.1.0.8802.1.1.2.1.5.4795.1.3.3.1.7

This table contains Location information as advertised
by the remote system.
          
This table may be sparsely populated. Entries in this table are
relevant only if the Location(3) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.

lldpXMedRemLocationEntry row .1.0.8802.1.1.2.1.5.4795.1.3.4.1

Information about Location information for the remote devices
connected to the ports.

Indexes

LLDP-MIBlldpRemTimeMark LLDP-MIBlldpRemLocalPortNum LLDP-MIBlldpRemIndex lldpXMedRemLocationSubtype

Column	Syntax	OID
lldpXMedRemLocationSubtype The location subtype advertised by the remote endpoint.	LocationSubtype Type Values: 1 unknown 2 coordinateBased 3 civicAddress 4 elin	.1.0.8802.1.1.2.1.5.4795.1.3.4.1.1
lldpXMedRemLocationInfo The location information advertised by the remote endpoint. Parsing of this information is dependent upon the location subtype, as defined by the value of the corresponding lldpXMedRemLocationSubType object.	OctetString Constraints: range: 0-256	.1.0.8802.1.1.2.1.5.4795.1.3.4.1.2

This table contains information about the PoE device type
as advertised by the remote system.
          
This table is densely populated.

lldpXMedRemXPoEEntry row .1.0.8802.1.1.2.1.5.4795.1.3.5.1

Information about PoE type of the remote devices
connected to the ports.

Indexes

LLDP-MIBlldpRemTimeMark LLDP-MIBlldpRemLocalPortNum LLDP-MIBlldpRemIndex

Column	Syntax	OID
lldpXMedRemXPoEDeviceType Defines the type of Power-via-MDI (Power over Ethernet) advertised by the remote device. A value pseDevice(2) indicates that the device is advertised as a Power Sourcing Entity (PSE). A val…	Enumeration Enumerated Values: 1 unknown 2 pseDevice 3 pdDevice 4 none	.1.0.8802.1.1.2.1.5.4795.1.3.5.1.1

This table contains extended PoE information as advertised
by the remote devices of PSE type.
          
This table may be sparsely populated. Entries in this table are
relevant only if the extendedPSE(4) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.

lldpXMedRemXPoEPSEEntry row .1.0.8802.1.1.2.1.5.4795.1.3.6.1

Information about Extended PoE PSE information for
the remote devices connected to the ports.

Indexes

LLDP-MIBlldpRemTimeMark LLDP-MIBlldpRemLocalPortNum LLDP-MIBlldpRemIndex

Column	Syntax	OID
lldpXMedRemXPoEPSEPowerAv This object contains the value of the power available from the PSE via this port expressed in units of 0.1 watts on the remote device.	tenth of wattUnsigned32 Constraints: range: 0-1023	.1.0.8802.1.1.2.1.5.4795.1.3.6.1.1
lldpXMedRemXPoEPSEPowerSource Defines the type of PSE Power Source advertised by the remote device. A value primary(2) indicates that the device advertises its power source as primary. A value backup(3) indicates that t…	Enumeration Enumerated Values: 1 unknown 2 primary 3 backup	.1.0.8802.1.1.2.1.5.4795.1.3.6.1.2
lldpXMedRemXPoEPSEPowerPriority This object contains the value of the PSE power priority advertised by the remote device. A value critical(2) indicates that the device advertises its power priority as critical, as per RFC 3621. …	Enumeration Enumerated Values: 1 unknown 2 critical 3 high 4 low	.1.0.8802.1.1.2.1.5.4795.1.3.6.1.3

This table contains extended PoE information as advertised
by the remote devices of PD type.
          
This table may be sparsely populated. Entries in this table are
relevant only if the extendedPD(5) bits in the
lldpXMedRemCapSupported and lldpXMedRemCapCurrent objects of the
corresponding ports are set.

lldpXMedRemXPoEPDEntry row .1.0.8802.1.1.2.1.5.4795.1.3.7.1

Information about XPoEPD information for the remote devices
connected to the ports.

Indexes

LLDP-MIBlldpRemTimeMark LLDP-MIBlldpRemLocalPortNum LLDP-MIBlldpRemIndex

Column	Syntax	OID
lldpXMedRemXPoEPDPowerReq This object contains the value of the power required by a PD connected remotely to the port expressed in units of 0.1 watts.	tenth of wattUnsigned32 Constraints: range: 0-1023	.1.0.8802.1.1.2.1.5.4795.1.3.7.1.1
lldpXMedRemXPoEPDPowerSource Defines the type of Power Source advertised as being used by the device connected remotely to the port. A value fromPSE(2) indicates that the device advertises its power source as received from a PSE. …	Enumeration Enumerated Values: 1 unknown 2 fromPSE 3 local 4 localAndPSE	.1.0.8802.1.1.2.1.5.4795.1.3.7.1.2
lldpXMedRemXPoEPDPowerPriority Defines the priority advertised as being required by the PD connected remotely to the port. A value critical(2) indicates that the device advertises its power Priority as critical, as per RFC 3621. …	Enumeration Enumerated Values: 1 unknown 2 critical 3 high 4 low	.1.0.8802.1.1.2.1.5.4795.1.3.7.1.3