LISP-MIB
This MIB module contains managed objects to support
monitoring devices that support the Locator/ID Separation
Protocol (LISP).
Copyright (c) 2013 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
- Source file
LISP-MIB- Last revised
- Identity
lispMIB- Base OID
1.3.6.1.2.1.220
Imported Objects
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| MPLS-L3VPN-STD-MIB | MplsL3VpnName |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter64 Integer32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LISP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LISP-MIB::lispMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LISP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LISP-MIB::lispMIB'
Objects (152)
Showing 152 of 152 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.220 |
||
.1.3.6.1.2.1.220.1 |
||
.1.3.6.1.2.1.220.1.1 |
||
.1.3.6.1.2.1.220.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.220.1.1.1.1 |
|
.1.3.6.1.2.1.220.1.1.1.10 |
||
.1.3.6.1.2.1.220.1.1.1.11 |
||
.1.3.6.1.2.1.220.1.1.1.12 |
||
.1.3.6.1.2.1.220.1.1.1.13 |
||
.1.3.6.1.2.1.220.1.1.1.14 |
||
.1.3.6.1.2.1.220.1.1.1.15 |
||
.1.3.6.1.2.1.220.1.1.1.2 |
||
.1.3.6.1.2.1.220.1.1.1.3 |
||
.1.3.6.1.2.1.220.1.1.1.4 |
||
.1.3.6.1.2.1.220.1.1.1.5 |
||
.1.3.6.1.2.1.220.1.1.1.6 |
||
.1.3.6.1.2.1.220.1.1.1.7 |
||
.1.3.6.1.2.1.220.1.1.1.8 |
||
.1.3.6.1.2.1.220.1.1.1.9 |
||
.1.3.6.1.2.1.220.1.10 |
||
.1.3.6.1.2.1.220.1.10.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.10.1.1 |
|
.1.3.6.1.2.1.220.1.10.1.2 |
||
.1.3.6.1.2.1.220.1.10.1.3 |
||
.1.3.6.1.2.1.220.1.10.1.4 |
||
.1.3.6.1.2.1.220.1.10.1.5 |
||
.1.3.6.1.2.1.220.1.10.1.6 |
||
.1.3.6.1.2.1.220.1.11 |
||
.1.3.6.1.2.1.220.1.11.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.11.1.1 |
|
.1.3.6.1.2.1.220.1.11.1.2 |
||
|
Enumeration
|
.1.3.6.1.2.1.220.1.11.1.3 |
|
.1.3.6.1.2.1.220.1.11.1.4 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.11.1.5 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.11.1.6 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.11.1.7 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.11.1.8 |
|
.1.3.6.1.2.1.220.1.12 |
||
.1.3.6.1.2.1.220.1.12.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.12.1.1 |
|
.1.3.6.1.2.1.220.1.12.1.2 |
||
|
Enumeration
|
.1.3.6.1.2.1.220.1.12.1.3 |
|
.1.3.6.1.2.1.220.1.13 |
||
.1.3.6.1.2.1.220.1.13.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.13.1.1 |
|
.1.3.6.1.2.1.220.1.13.1.2 |
||
|
Enumeration
|
.1.3.6.1.2.1.220.1.13.1.3 |
|
.1.3.6.1.2.1.220.1.14 |
||
.1.3.6.1.2.1.220.1.14.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.14.1.1 |
|
.1.3.6.1.2.1.220.1.14.1.2 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.14.1.3 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.14.1.4 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.14.1.5 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.14.1.6 |
|
|
Enumeration
|
.1.3.6.1.2.1.220.1.14.1.7 |
|
.1.3.6.1.2.1.220.1.2 |
||
.1.3.6.1.2.1.220.1.2.1 |
||
.1.3.6.1.2.1.220.1.2.1.1 |
||
.1.3.6.1.2.1.220.1.3 |
||
.1.3.6.1.2.1.220.1.3.1 |
||
.1.3.6.1.2.1.220.1.3.1.1 |
||
.1.3.6.1.2.1.220.1.3.1.2 |
||
.1.3.6.1.2.1.220.1.3.1.3 |
||
.1.3.6.1.2.1.220.1.3.1.4 |
||
.1.3.6.1.2.1.220.1.3.1.5 |
||
.1.3.6.1.2.1.220.1.3.1.6 |
||
.1.3.6.1.2.1.220.1.4 |
||
.1.3.6.1.2.1.220.1.4.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.4.1.1 |
|
.1.3.6.1.2.1.220.1.4.1.2 |
||
|
Unsigned32
|
.1.3.6.1.2.1.220.1.4.1.3 |
|
.1.3.6.1.2.1.220.1.4.1.4 |
||
.1.3.6.1.2.1.220.1.4.1.5 |
||
.1.3.6.1.2.1.220.1.4.1.6 |
||
.1.3.6.1.2.1.220.1.4.1.7 |
||
.1.3.6.1.2.1.220.1.4.1.8 |
||
.1.3.6.1.2.1.220.1.4.1.9 |
||
.1.3.6.1.2.1.220.1.5 |
||
.1.3.6.1.2.1.220.1.5.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.5.1.1 |
|
.1.3.6.1.2.1.220.1.5.1.10 |
||
.1.3.6.1.2.1.220.1.5.1.11 |
||
.1.3.6.1.2.1.220.1.5.1.12 |
||
.1.3.6.1.2.1.220.1.5.1.13 |
||
.1.3.6.1.2.1.220.1.5.1.2 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.5.1.3 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.5.1.4 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.5.1.5 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.5.1.6 |
|
|
Enumeration
|
.1.3.6.1.2.1.220.1.5.1.7 |
|
|
Enumeration
|
.1.3.6.1.2.1.220.1.5.1.8 |
|
.1.3.6.1.2.1.220.1.5.1.9 |
||
.1.3.6.1.2.1.220.1.6 |
||
.1.3.6.1.2.1.220.1.6.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.6.1.1 |
|
.1.3.6.1.2.1.220.1.6.1.10 |
||
.1.3.6.1.2.1.220.1.6.1.2 |
||
.1.3.6.1.2.1.220.1.6.1.3 |
||
.1.3.6.1.2.1.220.1.6.1.4 |
||
.1.3.6.1.2.1.220.1.6.1.5 |
||
.1.3.6.1.2.1.220.1.6.1.6 |
||
.1.3.6.1.2.1.220.1.6.1.7 |
||
.1.3.6.1.2.1.220.1.6.1.8 |
||
.1.3.6.1.2.1.220.1.6.1.9 |
||
.1.3.6.1.2.1.220.1.7 |
||
.1.3.6.1.2.1.220.1.7.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.7.1.1 |
|
.1.3.6.1.2.1.220.1.7.1.10 |
||
.1.3.6.1.2.1.220.1.7.1.11 |
||
.1.3.6.1.2.1.220.1.7.1.12 |
||
.1.3.6.1.2.1.220.1.7.1.13 |
||
.1.3.6.1.2.1.220.1.7.1.14 |
||
.1.3.6.1.2.1.220.1.7.1.15 |
||
.1.3.6.1.2.1.220.1.7.1.16 |
||
.1.3.6.1.2.1.220.1.7.1.17 |
||
.1.3.6.1.2.1.220.1.7.1.18 |
||
.1.3.6.1.2.1.220.1.7.1.2 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.7.1.3 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.7.1.4 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.7.1.5 |
|
|
Integer32
|
.1.3.6.1.2.1.220.1.7.1.6 |
|
|
Enumeration
|
.1.3.6.1.2.1.220.1.7.1.7 |
|
.1.3.6.1.2.1.220.1.7.1.8 |
||
.1.3.6.1.2.1.220.1.7.1.9 |
||
.1.3.6.1.2.1.220.1.8 |
||
.1.3.6.1.2.1.220.1.8.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.8.1.1 |
|
.1.3.6.1.2.1.220.1.8.1.2 |
||
|
Enumeration
|
.1.3.6.1.2.1.220.1.8.1.3 |
|
|
Enumeration
|
.1.3.6.1.2.1.220.1.8.1.4 |
|
.1.3.6.1.2.1.220.1.8.1.5 |
||
.1.3.6.1.2.1.220.1.8.1.6 |
||
.1.3.6.1.2.1.220.1.8.1.7 |
||
.1.3.6.1.2.1.220.1.8.1.8 |
||
.1.3.6.1.2.1.220.1.8.1.9 |
||
.1.3.6.1.2.1.220.1.9 |
||
.1.3.6.1.2.1.220.1.9.1 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.9.1.1 |
|
.1.3.6.1.2.1.220.1.9.1.10 |
||
.1.3.6.1.2.1.220.1.9.1.11 |
||
.1.3.6.1.2.1.220.1.9.1.2 |
||
|
OctetString
|
.1.3.6.1.2.1.220.1.9.1.3 |
|
|
OctetString
|
.1.3.6.1.2.1.220.1.9.1.4 |
|
.1.3.6.1.2.1.220.1.9.1.5 |
||
.1.3.6.1.2.1.220.1.9.1.6 |
||
.1.3.6.1.2.1.220.1.9.1.7 |
||
|
Integer32
|
.1.3.6.1.2.1.220.1.9.1.8 |
|
.1.3.6.1.2.1.220.1.9.1.9 |
||
.1.3.6.1.2.1.220.2 |
||
.1.3.6.1.2.1.220.2.1 |
||
.1.3.6.1.2.1.220.2.2 |
Dependencies (14) 5 direct · 9 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
- IANA-RTPROTO-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- MPLS-TC-STD-MIBrfc
- MPLS-LSR-STD-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- VPN-TC-STD-MIBrfc
- MPLS-L3VPN-STD-MIBrfc
- LISP-MIBrfcselected
Type Definitions (1)
| OctetString |
range: 5..39 |
Conformance Groups (14)
Compliance Statements (6)
OID
.1.3.6.1.2.1.220.2.1.1The compliance statement for LISP ETRs. It conveys
whether the device supports the ETR feature, and,
if so, the relevant state associated with that feature.
whether the device supports the ETR feature, and,
if so, the relevant state associated with that feature.
Required groups
| mandatory | lispMIBEtrGroup | |
| optional | lispMIBItrGroup | This group is optional. |
| optional | lispMIBPetrGroup | This group is optional. |
| optional | lispMIBPitrGroup | This group is optional. |
| optional | lispMIBMapServerGroup | This group is optional. |
| optional | lispMIBMapResolverGroup | This group is optional. |
| optional | lispMIBEtrExtendedGroup | This group is optional. |
| optional | lispMIBItrExtendedGroup | This group is optional. |
| optional | lispMIBMapServerExtendedGroup | This group is optional. |
| optional | lispMIBTuningParametersGroup | This group is optional. |
| optional | lispMIBEncapStatisticsGroup | This group is optional. |
| optional | lispMIBDecapStatisticsGroup | This group is optional. |
| optional | lispMIBDiagnosticsGroup | This group is optional. |
| optional | lispMIBVrfGroup | This group is optional. |
OID
.1.3.6.1.2.1.220.2.1.2The compliance statement for LISP ITRs. It conveys
whether the device supports the ITR feature, and,
if so, the relevant state associated with that feature.
whether the device supports the ITR feature, and,
if so, the relevant state associated with that feature.
Required groups
| mandatory | lispMIBItrGroup | |
| optional | lispMIBEtrGroup | This group is optional. |
| optional | lispMIBPetrGroup | This group is optional. |
| optional | lispMIBPitrGroup | This group is optional. |
| optional | lispMIBMapServerGroup | This group is optional. |
| optional | lispMIBMapResolverGroup | This group is optional. |
| optional | lispMIBEtrExtendedGroup | This group is optional. |
| optional | lispMIBItrExtendedGroup | This group is optional. |
| optional | lispMIBMapServerExtendedGroup | This group is optional. |
| optional | lispMIBTuningParametersGroup | This group is optional. |
| optional | lispMIBEncapStatisticsGroup | This group is optional. |
| optional | lispMIBDecapStatisticsGroup | This group is optional. |
| optional | lispMIBDiagnosticsGroup | This group is optional. |
| optional | lispMIBVrfGroup | This group is optional. |
OID
.1.3.6.1.2.1.220.2.1.3The compliance statement for LISP Proxy-ETRs. It
conveys whether the device supports the Proxy-ETR
feature, and, if so, the relevant state associated
with that feature.
conveys whether the device supports the Proxy-ETR
feature, and, if so, the relevant state associated
with that feature.
Required groups
| mandatory | lispMIBPetrGroup | |
| optional | lispMIBEtrGroup | This group is optional. |
| optional | lispMIBItrGroup | This group is optional. |
| optional | lispMIBPitrGroup | This group is optional. |
| optional | lispMIBMapServerGroup | This group is optional. |
| optional | lispMIBMapResolverGroup | This group is optional. |
| optional | lispMIBEtrExtendedGroup | This group is optional. |
| optional | lispMIBItrExtendedGroup | This group is optional. |
| optional | lispMIBMapServerExtendedGroup | This group is optional. |
| optional | lispMIBTuningParametersGroup | This group is optional. |
| optional | lispMIBEncapStatisticsGroup | This group is optional. |
| optional | lispMIBDecapStatisticsGroup | This group is optional. |
| optional | lispMIBDiagnosticsGroup | This group is optional. |
| optional | lispMIBVrfGroup | This group is optional. |
OID
.1.3.6.1.2.1.220.2.1.4The compliance statement for LISP Proxy-ITRs. It
conveys whether the device supports the Proxy-ITR
feature, and, if so, the relevant state associated
with that feature.
conveys whether the device supports the Proxy-ITR
feature, and, if so, the relevant state associated
with that feature.
Required groups
| mandatory | lispMIBPitrGroup | |
| optional | lispMIBEtrGroup | This group is optional. |
| optional | lispMIBItrGroup | This group is optional. |
| optional | lispMIBPetrGroup | This group is optional. |
| optional | lispMIBMapServerGroup | This group is optional. |
| optional | lispMIBMapResolverGroup | This group is optional. |
| optional | lispMIBEtrExtendedGroup | This group is optional. |
| optional | lispMIBItrExtendedGroup | This group is optional. |
| optional | lispMIBMapServerExtendedGroup | This group is optional. |
| optional | lispMIBTuningParametersGroup | This group is optional. |
| optional | lispMIBEncapStatisticsGroup | This group is optional. |
| optional | lispMIBDecapStatisticsGroup | This group is optional. |
| optional | lispMIBDiagnosticsGroup | This group is optional. |
| optional | lispMIBVrfGroup | This group is optional. |
OID
.1.3.6.1.2.1.220.2.1.5The compliance statement for LISP Map Servers. It
conveys whether the device supports the Map Server
feature, and, if so, the relevant state associated
with that feature.
conveys whether the device supports the Map Server
feature, and, if so, the relevant state associated
with that feature.
Required groups
| mandatory | lispMIBMapServerGroup | |
| optional | lispMIBEtrGroup | This group is optional. |
| optional | lispMIBItrGroup | This group is optional. |
| optional | lispMIBPetrGroup | This group is optional. |
| optional | lispMIBPitrGroup | This group is optional. |
| optional | lispMIBMapResolverGroup | This group is optional. |
| optional | lispMIBEtrExtendedGroup | This group is optional. |
| optional | lispMIBItrExtendedGroup | This group is optional. |
| optional | lispMIBMapServerExtendedGroup | This group is optional. |
| optional | lispMIBTuningParametersGroup | This group is optional. |
| optional | lispMIBEncapStatisticsGroup | This group is optional. |
| optional | lispMIBDecapStatisticsGroup | This group is optional. |
| optional | lispMIBDiagnosticsGroup | This group is optional. |
| optional | lispMIBVrfGroup | This group is optional. |
OID
.1.3.6.1.2.1.220.2.1.6The compliance statement for LISP Map Resolvers. It
conveys whether the device supports the Map Resolver
feature, and, if so, the relevant state associated
with that feature.
conveys whether the device supports the Map Resolver
feature, and, if so, the relevant state associated
with that feature.
Required groups
| mandatory | lispMIBMapResolverGroup | |
| optional | lispMIBEtrGroup | This group is optional. |
| optional | lispMIBItrGroup | This group is optional. |
| optional | lispMIBPetrGroup | This group is optional. |
| optional | lispMIBPitrGroup | This group is optional. |
| optional | lispMIBMapServerGroup | This group is optional. |
| optional | lispMIBEtrExtendedGroup | This group is optional. |
| optional | lispMIBItrExtendedGroup | This group is optional. |
| optional | lispMIBMapServerExtendedGroup | This group is optional. |
| optional | lispMIBTuningParametersGroup | This group is optional. |
| optional | lispMIBEncapStatisticsGroup | This group is optional. |
| optional | lispMIBDecapStatisticsGroup | This group is optional. |
| optional | lispMIBDiagnosticsGroup | This group is optional. |
| optional | lispMIBVrfGroup | This group is optional. |