LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
95

apCaptivePortalTable

table
.1.3.6.1.4.1.3955.1000.203.120.1.2.1 · 1 row entry · 28 columns
Open in standard view
Uses the linksys variant from /opt/observium/mibs/linksys.
Command help
Walk apCaptivePortalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB' -M '/opt/observium/mibs/linksys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB::apCaptivePortalTable' 
A table of config parms for instances of captive portal.
apCaptivePortalEntry row .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1
Captive Portal instance entry.
Indexes
Column Syntax OID
apCaptivePortalInstanceId
The identifier associated with this instance of captive
portal.
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.1
apCaptivePortalConfigName
The name, in alpha-numeric characters, assigned to this
captive portal configuration.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.2
apCaptivePortalAdminMode
Enable or disable this instance of captive portal on
the system.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.3
apCaptivePortalProtocolMode
The protocol mode to be used.
Enumerationr/w
Enumerated Values:
1http
2https
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.4
apCaptivePortalVerifyMode
The type of user verification to perform.
Enumerationr/w
Enumerated Values:
0guest
1local
2radius
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.5
apCaptivePortalURLRedirectMode
Whether the captive portal should redirect newly
authenticated clients to the configured URL. If this mode
is disabled, the default locale specific welcome page is
used. If enabled, the client is redirected to a conf…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.6
apCaptivePortalRedirectURL
The URL to which the newly authenticated client is
redirected if apCaptivePortalURLRedirectMode is enabled.
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.7
apCaptivePortalAwayTime
This field indicates the expiry time in minutes for
authenticated clients that have been disassociated. The
client is removed from captive portal client user list if
away time exceeds this configured value.
Unsigned32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.8
apCaptivePortalSessionTimeout
The session timeout in minutes. After this limit has been reached
the user will be disconnected. If this value is set to 0,
no timeout is enforced.This value is represented in
minutes.
Unsigned32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.9
apCaptivePortalUserUpRate
The maximum bandwidth, in megabytes per second, that a
client can transmit traffic when using Captive Portal. This
setting limits the bandwidth at which the client can send
data into the network. If this value is set …
Unsigned32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.10
apCaptivePortalUserDownRate
The maximum bandwidth, in megabytes per second, that a
client can receive traffic when using Captive Portal. This
setting limits the bandwidth at which the client can
receive data from the network. If this value is se…
Unsigned32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.11
apCaptivePortalUserGroup
This field indicates the group name assigned to the
configuration to be used by local users.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.12
apCaptivePortalUseRadiusSetting
Indicates to use global radius settings or CP instance
radius settings.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.13
apCaptivePortalRadiusServerIPType
Indicates the RADIUS server IP address type for AP
Captive Portal.
Enumerationr/w
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.14
apCaptivePortalRadiusServer1
Indicates IPv4 address of the primary RADIUS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.15
apCaptivePortalRadiusServer2
Indicates IPv4 address of the first backup RADIUS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.16
apCaptivePortalRadiusServer3
Indicates IPv4 address of the second backup RADIUS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.17
apCaptivePortalRadiusServer4
Indicates IPv4 address of the third backup RADIUS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.18
apCaptivePortalIPv6RadiusServer1
Indicates IPv6 address of the primary RADIUS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.19
apCaptivePortalIPv6RadiusServer2
Indicates IPv6 address of the first backup RADIUS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.20
apCaptivePortalIPv6RadiusServer3
Indicates IPv6 address of the second backup RADIUS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.21
apCaptivePortalIPv6RadiusServer4
Indicates IPv6 address of the third backup RADIUS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.22
apCaptivePortalRadiusServerKey1
Indicates the shared secret key for the AP Captive Portal
RADIUS server. The text you enter will be displayed as '*'
characters to prevent others from seeing the RADIUS key as
you type. Default value of RADIUS key is NU…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.23
apCaptivePortalRadiusServerKey2
Indicates the shared secret key for the AP Captive Portal
RADIUS server. The text you enter will be displayed as '*'
characters to prevent others from seeing the RADIUS key as
you type. Default value of RADIUS key is NU…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.24
apCaptivePortalRadiusServerKey3
Indicates the shared secret key for the AP Captive Portal
RADIUS server. The text you enter will be displayed as '*'
characters to prevent others from seeing the RADIUS key as
you type. Default value of RADIUS key is NU…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.25
apCaptivePortalRadiusServerKey4
Indicates the shared secret key for the AP Captive Portal
RADIUS server. The text you enter will be displayed as '*'
characters to prevent others from seeing the RADIUS key as
you type. Default value of RADIUS key is NU…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.26
apCaptivePortalRadiusAccounting
Indicates RADIUS Accounting is enabled or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.27
apCaptivePortalRowStatus
The captive portal instance status.

Supported values:
active(1) - This status is displayed after a valid
Captive Portal instance is created.
createAndGo(4) - Set to this value to c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3955.1000.203.120.1.2.1.1.28

apcpConfigWebLocaleTable

table
.1.3.6.1.4.1.3955.1000.203.120.1.3.1 · 1 row entry · 30 columns
Open in standard view
Uses the linksys variant from /opt/observium/mibs/linksys.
Command help
Walk apcpConfigWebLocaleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB' -M '/opt/observium/mibs/linksys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB::apcpConfigWebLocaleTable' 
This database is used to web config.
apcpConfigWebLocaleEntry row .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1
Captive Portal instance client status entry.
Indexes
Column Syntax OID
apcpConfigWebLocaleId
Unique identifier used to index this locale within its
assigned captive portal configuration.
Unsigned32
Constraints:
range: 1-3
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.1
apcpConfigWebLocaleConfigName
Unique name used to index this locale within its
assigned captive portal configuration.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.2
apcpConfigWebLocaleInstanceName
Unique name associated with captive portal instance.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.3
apcpConfigWebLocaleInstanceId
The identifier associated with Captive Portal instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.4
apcpConfigWebLocaleBackgroundImageName
Optional background image. Recommended image should be
5KB max,GIF or JPG format.
OctetStringr/w
Constraints:
range: 5-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.5
apcpConfigWebLocaleLogoImageName
File name of an image used for branding purposes, such as
the company logo. Image should be 5KB max, 200x200 pixels,
GIF or JPG format.
OctetStringr/w
Constraints:
range: 5-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.6
apcpConfigWebLocaleFontList
Prioritized, comma separated, list of fonts to be used by
the client brower. Font specifications are necessary for
proper locale display.
OctetStringr/w
Constraints:
range: 1-512
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.7
apcpConfigWebLocaleBrowserTitle
Enter the text to display on the client Web browser
title bar or tab.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.8
apcpConfigWebLocaleTitleText
Enter the text for use to greet the users.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.9
apcpConfigWebLocaleForegroundColour
Foreground color of login page using a well known color
name or RGB value.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.10
apcpConfigWebLocaleBackgroundColour
Background color of login page using a well known color
name or RGB value.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.11
apcpConfigWebLocaleSeperatorColour
Separator bar color of the login page using a well known
color name or RGB value.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.12
apcpConfigWebLocaleLabel
Label text for tab and links identifying the language.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.13
apcpConfigWebLocaleLocale
Used to identify the users language of choice for
customized content.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.14
apcpConfigWebLocaleAccountImageName
Account image that is stretched across the account column.
Recommended image should be 5KB max ,GIF or JPG format.
OctetStringr/w
Constraints:
range: 5-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.15
apcpConfigWebLocaleAccountLabel
General label text used to identify the account type.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.16
apcpConfigWebLocaleUserLabel
Enter the text to display next to the field where the
user enters the username.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.17
apcpConfigWebLocalePasswordLabel
Enter the text to display next to the field where the
user enters the password.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.18
apcpConfigWebLocaleButtonLabel
Enter the text to display on the button the user clicks
to connect to the network.
OctetStringr/w
Constraints:
range: 2-32
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.19
apcpConfigWebLocaleInstructionalText
Text used to provide instructional content.
OctetStringr/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.20
apcpConfigWebLocaleAUPText
Enter the text to display in the Acceptance Use Policy field.
The acceptance use policy instructs users about the
conditions under which they are allowed to access the
network.
OctetStringr/w
Constraints:
range: 1-4096
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.21
apcpConfigWebLocaleAcceptText
Enter the text to display next to the box that the user
must select to indicate that he or she accepts the terms
of use.Acceptance.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.22
apcpConfigWebLocaleNoAcceptText
Text used to indicate that authentication failed because
the client did not acknowledge the AUP.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.23
apcpConfigWebLocaleWIPMsgText
Text used while waiting for user verification.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.24
apcpConfigWebLocaleDeniedMsgText
Enter the text to display when the user does not provide
valid authentication information. This message displays
after the user clicks the button to connect to the
network.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.25
apcpConfigWebLocaleResourceMsgTextobsolete
Enter the text to display when the system has rejected
authentication due to system resource limitations. This
message displays after the user clicks the button to
connect to the network.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.26
apcpConfigWebLocaleTimeoutMsgTextobsolete
Enter the text to display when the system has rejected
authentication because the authentication transaction took
too long. This could be due to user input time, or a
timeout due to the overall transaction.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.27
apcpConfigWebLocaleWelcomeTitleText
Enter the title to display to greet the user after he or
she successfully connects to the network.
OctetStringr/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.28
apcpConfigWebLocaleWelcomeText
Enter the additional text to display when the user is
successfully connected to the network
OctetStringr/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.29
apcpConfigWebLocaleRowStatus
The captive portal web locale instance status.
Supported values:
active(1) - This status is displayed after a valid
Captive Portal instance is created.
createAndGo(4) - Set to this value to creat…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3955.1000.203.120.1.3.1.1.30

apcpLocalUserGroupTable

table
.1.3.6.1.4.1.3955.1000.203.120.1.4.1 · 1 row entry · 2 columns
Open in standard view
Uses the linksys variant from /opt/observium/mibs/linksys.
Command help
Walk apcpLocalUserGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB' -M '/opt/observium/mibs/linksys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB::apcpLocalUserGroupTable' 
A table of group definitions for the local users. This 
database is used by captive portal instances and local 
users if the verification mode is set to LOCAL.
apcpLocalUserGroupEntry row .1.3.6.1.4.1.3955.1000.203.120.1.4.1.1
The user group entry.
Indexes
Column Syntax OID
apcpLocalUserGroupName
The user group name, limited to alpha-numeric strings
(including the '-' and '_' characters).
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.4.1.1.1
apcpLocalUserGroupRowStatus
The user group entry status.

Supported values:
active(1) - This status is displayed after a valid
user group is created.
createAndGo(4) - Set to this value to create a new user
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3955.1000.203.120.1.4.1.1.2

apcpLocalUserTable

table
.1.3.6.1.4.1.3955.1000.203.120.1.4.2 · 1 row entry · 6 columns
Open in standard view
Uses the linksys variant from /opt/observium/mibs/linksys.
Command help
Walk apcpLocalUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB' -M '/opt/observium/mibs/linksys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB::apcpLocalUserTable' 
A table of user definitions for the local database. This 
database is used by a captive portal instance if its 
verification mode is set to LOCAL.
apcpLocalUserEntry row .1.3.6.1.4.1.3955.1000.203.120.1.4.2.1
The local user entry.
Indexes
Column Syntax OID
apcpLocalUserName
The user name, limited to alpha-numeric strings
(including the '-' and '_' characters).
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.4.2.1.1
apcpLocalUserPassword
The user password is set of alphanumeric characters and
allowed special characters ` ~ ! @ # $ % ^ & * ( ) - _+
= { } [ ] | ; : , < > . ?. This object will return an
empty string even if a password is set.
OctetStringr/w
Constraints:
range: 8-64
 .1.3.6.1.4.1.3955.1000.203.120.1.4.2.1.2
apcpLocalUserAwayTimeout
The away timeout in minutes. After this limit is
reached, the user is disconnected.If this value is set to
0, the default value for the captive portal is used.
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.3955.1000.203.120.1.4.2.1.3
apcpLocalUserMaxBandwidthUp
The maximum bandwidth, in megabytes per second, that the
user can transmit traffic when using Captive Portal. This
setting limits the bandwidth at which the user can send
data into the network. If this value is set to…
Unsigned32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.3955.1000.203.120.1.4.2.1.4
apcpLocalUserMaxBandwidthDown
The maximum bandwidth, in megabytes per second, that the
user can receive traffic when using Captive Portal. This
setting limits the bandwidth at which the user can send
data into the network. If this value is set to …
Unsigned32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.3955.1000.203.120.1.4.2.1.5
apcpLocalUserRowStatus
The user entry status.

Supported values:
active(1) - This status is displayed after a valid
user is created.
createAndGo(4) - Set to this value to create a new user.
destroy(6) …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3955.1000.203.120.1.4.2.1.6

apcpLocalUserGroupAssociationTable

table
.1.3.6.1.4.1.3955.1000.203.120.1.4.3 · 1 row entry · 3 columns
Open in standard view
Uses the linksys variant from /opt/observium/mibs/linksys.
Command help
Walk apcpLocalUserGroupAssociationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB' -M '/opt/observium/mibs/linksys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB::apcpLocalUserGroupAssociationTable' 
The mapping of local user assignments to a user group.
apcpLocalUserGroupAssociationEntry row .1.3.6.1.4.1.3955.1000.203.120.1.4.3.1
The local user group association entry.
Indexes
Column Syntax OID
apcpLocalUserGroupAssociationGroupName
The user group association entry group name.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.4.3.1.1
apcpLocalUserGroupAssociationUserName
The user name associated with user group association entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.1.4.3.1.2
apcpLocalUserGroupAssociationRowStatus
The local user to user group association entry status.

Supported values:
active(1) - This status is displayed after a valid
association between a local user and a
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3955.1000.203.120.1.4.3.1.3

apcpVAPConfigGroupTable

table
.1.3.6.1.4.1.3955.1000.203.120.1.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the linksys variant from /opt/observium/mibs/linksys.
Command help
Walk apcpVAPConfigGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB' -M '/opt/observium/mibs/linksys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB::apcpVAPConfigGroupTable' 
A table of group definitions for the local users. This 
database is used by captive portal instances and local 
users if the verification mode is set to LOCAL.
apcpVAPConfigGroupEntry row .1.3.6.1.4.1.3955.1000.203.120.1.5.1.1
The user group entry.
Indexes
Column Syntax OID
apcpVAPConfigGroupIndex
The VAP interface entry index, it can take values from
vap0 to vap15.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3955.1000.203.120.1.5.1.1.1
apcpVAPConfigGroupRadioIndex
The radio interface entry index, it can take values
from wlan0 to wlan1.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3955.1000.203.120.1.5.1.1.2
apcpVAPConfigGroupCPIntance
The name of captive portal instance, assigned to this
VAP/radio configuration.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.3955.1000.203.120.1.5.1.1.3

apcpAuthenticatedClientStatusTable

table
.1.3.6.1.4.1.3955.1000.203.120.2.1.1 · 1 row entry · 15 columns
Open in standard view
Uses the linksys variant from /opt/observium/mibs/linksys.
Command help
Walk apcpAuthenticatedClientStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB' -M '/opt/observium/mibs/linksys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB::apcpAuthenticatedClientStatusTable' 
This database is used to report status of authenticated 
clients.
apcpAuthenticatedClientStatusEntry row .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1
Captive portal authenticated client status entry.
Indexes
Column Syntax OID
apcpAuthenticatedClientMacAddress
The MAC address of authenticated client.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.1
apcpAuthenticatedClientIpAddress
The IP address of the authenticated client.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.2
apcpAuthenticatedClientUserName
User name (or Guest ID) of the connected client.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.3
apcpAuthenticatedClientProtocolMode
Protocol mode used for the client authentication.
Enumeration
Enumerated Values:
1http
2https
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.4
apcpAuthenticatedClientVerifyMode
Type of user verification performed for the client
authentication.
Enumeration
Enumerated Values:
0guest
1local
2radius
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.5
apcpAuthenticatedClientVapIndex
The VAP interface on which the client was authenticated.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.6
apcpAuthenticatedClientRadioIndex
The radio index on which the client was authenticated.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.7
apcpAuthenticatedClientCPInstanceId
The captive portal instance on which the client is
authenticated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.8
apcpAuthenticatedClientSessionTimeout
The time remaining (in seconds) for the client to get unauthorized by the AP.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.9
apcpAuthenticatedClientAwayTimeout
The time remaining (in seconds) for the client to get disassociated
by AP.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.10
apcpAuthenticatedClientInitalURLdeprecated
The URL received in the initial request.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.11
apcpAuthenticatedClientRxPackets
The number of packets received by the client
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.12
apcpAuthenticatedClientTxPackets
The number of packets transmitted by the client
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.13
apcpAuthenticatedClientRxBytes
The number of bytes received by the client
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.14
apcpAuthenticatedClientTxBytes
The number of bytes transmitted by the client
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3955.1000.203.120.2.1.1.1.15

apcpAuthFailedClientStatusTable

table
.1.3.6.1.4.1.3955.1000.203.120.2.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the linksys variant from /opt/observium/mibs/linksys.
Command help
Walk apcpAuthFailedClientStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB' -M '/opt/observium/mibs/linksys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LINKSYS-WLAN-ACCESS-POINT-CAPTIVE-PORTAL-MIB::apcpAuthFailedClientStatusTable' 
This database is used to report status of authenticated 
clients.
apcpAuthFailedClientStatusEntry row .1.3.6.1.4.1.3955.1000.203.120.2.2.1.1
Captive portal authenticated client status entry.
Indexes
Column Syntax OID
apcpAuthFailedClientMacAddress
The MAC address of authentication failed client.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3955.1000.203.120.2.2.1.1.1
apcpAuthFailedClientIpAddress
The IP address of the authentication failed client.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3955.1000.203.120.2.2.1.1.2
apcpAuthFailedClientTimeStamp
The time (in seconds) since the client failed
authorization.
RFC1213-MIBDisplayString .1.3.6.1.4.1.3955.1000.203.120.2.2.1.1.3
apcpAuthFailedClientUserName
User name (or Guest ID) of the authentication failed
client.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.120.2.2.1.1.4
apcpAuthFailedClientVerifyMode
Type of user verification performed for the
authentication failed client.
Enumeration
Enumerated Values:
0guest
1local
2radius
 .1.3.6.1.4.1.3955.1000.203.120.2.2.1.1.5
apcpAuthFailedClientVapIndex
The VAP interface on which the client failed
authentication.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3955.1000.203.120.2.2.1.1.6
apcpAuthFailedClientRadioIndex
The radio index on which the client failed
authentication.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3955.1000.203.120.2.2.1.1.7
apcpAuthFailedClientCPInstanceId
The captive portal instance on which the client failed
authentication.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.120.2.2.1.1.8