LIEBERT-GP-FLEXIBLE-MIB Table View

This table contains data points supported by the managed device. The 
data in this table is formatted in string form. This data is also 
available in numerical form in the augmented 
lgpFlexibleExtendedTable.
          
In this table, the row indexing is not necessarily sequential and 
leads to a sparsely populated table.

lgpFlexibleBasicEntry row .1.3.6.1.4.1.476.1.42.3.9.20.1

This entry defines the columns to be populated in the
'lgpFlexibleBasicTable'.

Indexes

lgpFlexibleEntryIndex

Column	Syntax	OID
lgpFlexibleEntryIndex This is the index which defines a specific row in the lgpFlexibleBasicTable. Each row index is associated with a unique data point ID which fixes the data point to its permanent location in the table.	ObjectIdentifier	.1.3.6.1.4.1.476.1.42.3.9.20.1.1
lgpFlexibleEntryDataLabel A short description of the data reported in this row.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.476.1.42.3.9.20.1.10
lgpFlexibleEntryValue A string representation of any data available. This is the preferred method of data access, since this will give fully scaled data for both integer and floating point data, in addition to textual data. If this string …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.476.1.42.3.9.20.1.20
lgpFlexibleEntryUnitsOfMeasure The unit of measure that the value will be presented in. This is not populated when the data does not have a unit of measure associated with it.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.476.1.42.3.9.20.1.30

This table contains data points supported by the managed device.  This
table augments the lgpFlexibleBasicTable, providing additional
information that may be relevant to advanced users.  Values presented 
in string format in the lgpFlexibleBasicTable table are also available in 
numeric form in this table.
          
Since the lgpFlexibleBasicTable and this table are both indexed by 
lgpFlexibleEntryIndex, data applicable to a specific data point can be 
found in both tables at the same index.

lgpFlexibleExtendedEntry row .1.3.6.1.4.1.476.1.42.3.9.30.1

This entry defines the columns to be populated in the
'lgpFlexibleExtendedTable'.

Indexes

No indexes recorded

Column	Syntax	OID
lgpFlexibleEntryIntegerValue This is the data point value formatted as a signed integer. This column is populated only for numerical data points whose type requires a signed value. To convert this value to the units indicated in th…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.9.30.1.10
lgpFlexibleEntryUnsignedIntegerValue This is the data point value formatted as an unsigned integer. This column is populated only for numerical data points whose type does not require a signed value. To convert this value to the units indi…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.9.30.1.20
lgpFlexibleEntryDecimalPosition This is a power of ten divider needed to convert values from the signed and unsigned integer columns (lgpFlexibleEntryIntegerValue or lgpFlexibleEntryUnsignedIntegerValue) to floating point values. This essentially …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.9.30.1.30
lgpFlexibleEntryDataType The format that the data will appear as. This can be used to determine which field the numerical data will appear in. Data of type int16 and int32 will appear in the column lgpFlexibleEntryIntegerValue. Data of type…	Enumeration Enumerated Values: 0 not-specified 1 int16 2 uint16 3 int32 4 uint32 5 text 6 enum 7 event16 8 event32 9 ipv4 10 time32	.1.3.6.1.4.1.476.1.42.3.9.30.1.40
lgpFlexibleEntryAccessibility This describes the read/write access that is available for the data in the row.	Enumeration Enumerated Values: 0 not-specified 1 readonly 2 writeonly 3 readwrite	.1.3.6.1.4.1.476.1.42.3.9.30.1.50
lgpFlexibleEntryUnitsOfMeasureEnum The unit of measurement that the value will be in.	Enumeration Enumerated Values: 0 not-specified 4096 milliSeconds 4097 seconds 4098 minutes 4099 hours 4100 voltsAcRms 4101 milliVoltsAcRms 4102 voltsDc 4103 milliVoltsDc 4104 voltsPeak 4105 voltsPeakToPeak 4106 ampsAcRms 4107 milliAmpsAcRms 4108 ampsDc 4109 milliAmpsDc 4110 voltAmps 4111 kiloVoltAmps 4112 voltAmpsReactive 4113 kVAReactive 4114 watts 4115 kiloWatts 4116 wattHours 4117 kiloWattHour 4118 ampDcHours 4119 hertz 4120 milliHertz 4121 kiloHertz 4122 megaHertz 4123 gigaHertz 4124 percent 4125 degC 4126 degCDelta 4127 degF 4128 degFDelta 4129 psi 4130 pascal 4131 psia 4132 relativeHumidity 4133 thd 4134 days 4135 phase 4136 microOhms 4137 milliOhms 4138 ohms 4139 kiloOhms 4140 megaOhms 4141 bars 4142 rpm 4143 bytes 4144 kilobytes 4145 megabytes 4146 gigabytes 4147 terabytes 4148 voltAmpHours 4149 kiloVoltAmpHours 4150 vaReactiveHours 4151 kVAReactiveHours 4152 meter 4153 feet 4154 cms 4155 cmh 4156 cfs 4157 cfm 4158 lpm 4159 gpmUk 4160 gpmUs 4161 absoluteHumidity 4162 kilograms 4163 cubicMeters 4164 btu 4165 torrs 4166 millitorrs 4167 pounds 4168 mps 4169 fpm 4170 liter 4171 gallonUs 4172 gallonUk 4173 lps 4174 mho 4175 siemensCm 4176 weeks 4177 inWC 4178 btuHours	.1.3.6.1.4.1.476.1.42.3.9.30.1.60
lgpFlexibleEntryDataDescription A description of the data reported in this row. This is generally longer and more thorough than the simple label described by lgpFlexibleEntryDataLabel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.476.1.42.3.9.30.1.70