LIEBERT-GP-ENVIRONMENTAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
90

lgpEnvTemperatureTableDegF

table
.1.3.6.1.4.1.476.1.42.3.4.1.2.3 · 1 row entry · 21 columns
Open in standard view
Uses the liebert variant from /opt/observium/mibs/liebert.
Command help
Walk lgpEnvTemperatureTableDegF
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-ENVIRONMENTAL-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvTemperatureTableDegF' 
A list of temperature table entries.  The table contains zero, one,
or many rows, depending upon the number of temperature objects
available.  The NMS cannot create or delete rows from the table. The
rows are created by the agent based upon the capabilities of the
managed device.  The entries in this table are cloned in
'lgpEnvTemperatureTableDegC' where Fahrenheit values are converted to
Celsius.
lgpEnvTemperatureEntryDegF row .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1
This entry defines the contents of the rows for the table
'lgpEnvTemperatureTableDegF'.
Indexes
Column Syntax OID
lgpEnvTemperatureIdDegF
This OID is used as an index to identify a row in the table
'lgpEnvTemperatureTableDegF'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.1
lgpEnvTemperatureDescrDegF
A reference to a temperature description object. The object
referenced should not be accessible, but rather be used to provide
a unique description of the temperature.
ObjectIdentifier .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.2
lgpEnvTemperatureMeasurementDegF
The measured temperature value.
degrees FahrenheitSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.3
lgpEnvTemperatureHighThresholdDegF
The high temperature notification threshold. This is the maximum
value of 'lgpEnvTemperatureMeasurementDegF' before the agent sends a
notification.
degrees FahrenheitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.4
lgpEnvTemperatureLowThresholdDegF
The low temperature notification threshold. This is the minimum
value of 'lgpEnvTemperatureMeasurementDegF' before the agent sends a
notification.
degrees FahrenheitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.5
lgpEnvTemperatureSetPointDegF
The temperature setting for the well known
'lgpEnvTemperatureDescrDegF' point. This setting may or may not be
the setting used from control. Some systems have the capability to
dynamically change the control setting b…
degrees FahrenheitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.6
lgpEnvTemperatureDailyHighDegF
The daily high temperature measurement.
degrees FahrenheitSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.7
lgpEnvTemperatureDailyLowDegF
The daily low temperature measurement.
degrees FahrenheitSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.8
lgpEnvTempDailyHighTimeHourDegF
The hours digit of the time corresponding to the daily high
temperature measurement.
hoursInteger32
Constraints:
range: 0-23
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.9
lgpEnvTempDailyHighTimeMinuteDegF
The minutes digit of the time corresponding to the daily high
temperature measurement.
minutesInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.10
lgpEnvTempDailyHighTimeSecondDegF
The seconds digit of the time corresponding to the daily high
temperature measurement.
secondsInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.11
lgpEnvTempDailyLowTimeHourDegF
The hours digit of the time corresponding to the daily low
temperature measurement.
hoursInteger32
Constraints:
range: 0-23
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.12
lgpEnvTempDailyLowTimeMinuteDegF
The minutes digit of the time corresponding to the daily low
temperature measurement.
minutesInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.13
lgpEnvTempDailyLowTimeSecondDegF
The seconds digit of the time corresponding to the daily low
temperature measurement.
secondsInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.14
lgpEnvTemperatureMeasurementTenthsDegF
The measured temperature value.
.1 degrees FahrenheitSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.50
lgpEnvTemperatureHighThresholdTenthsDegF
The high temperature notification threshold. This is the maximum
value of 'lgpEnvTemperatureMeasurementTenthsDegF' before the agent sends a
notification.
.1 degrees FahrenheitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.51
lgpEnvTemperatureLowThresholdTenthsDegF
The low temperature notification threshold. This is the minimum
value of 'lgpEnvTemperatureMeasurementTenthsDegF' before the agent sends a
notification.
.1 degrees FahrenheitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.52
lgpEnvTemperatureSetPointTenthsDegF
The temperature setting for the well known
'lgpEnvTemperatureDescrDegF' point. This setting may or may not be
the setting used from control. Some systems have the capability to
dynamically change the control setting b…
.1 degrees FahrenheitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.53
lgpEnvTemperatureDeadBandTenthsDegF
The deadband region around the setpoint value
(lgpEnvTemperatureSetPointTenthsDegF) where no heating or cooling will occur.
.1 degrees FahrenheitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.60
lgpEnvTempHeatingPropBandTenthsDegF
The proportional region below the setpoint value
(lgpEnvTemperatureSetPointTenthsDegF) where heating will be
proportionally controlled.
.1 degrees FahrenheitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.61
lgpEnvTempCoolingPropBandTenthsDegF
The proportional region above the setpoint value
(lgpEnvTemperatureSetPointTenthsDegF) where cooling will be
proportionally controlled.
.1 degrees FahrenheitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.2.3.1.62

lgpEnvTemperatureTableDegC

table
.1.3.6.1.4.1.476.1.42.3.4.1.3.3 · 1 row entry · 21 columns
Open in standard view
Uses the liebert variant from /opt/observium/mibs/liebert.
Command help
Walk lgpEnvTemperatureTableDegC
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-ENVIRONMENTAL-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvTemperatureTableDegC' 
A list of temperature table entries.  The table contains zero, one,
or many rows, depending upon the number of temperature objects
available.  The NMS cannot create or delete rows from the table. The
rows are created by the agent based upon the capabilities of the
managed device.  The entries in this table are cloned in
'lgpEnvTemperatureTableDegF' where Celsius values are converted to
Fahrenheit.
lgpEnvTemperatureEntryDegC row .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1
This entry defines the contents of the rows for the table
'lgpEnvTemperatureTableDegC'.
Indexes
Column Syntax OID
lgpEnvTemperatureIdDegC
This OID is used as an index to identify a row in the table
'lgpEnvTemperatureTableDegC'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.1
lgpEnvTemperatureDescrDegC
A reference to a temperature description object. The object
referenced should not be accessible, but rather be used to provide
a unique description of the temperature.
ObjectIdentifier .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.2
lgpEnvTemperatureMeasurementDegC
The measured temperature value.
degrees CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.3
lgpEnvTemperatureHighThresholdDegC
The high temperature notification threshold. This is the maximum
value of 'lgpEnvTemperatureMeasurementDegC' before the agent sends a
notification.
degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.4
lgpEnvTemperatureLowThresholdDegC
The low temperature notification threshold. This is the minimum
value of 'lgpEnvTemperatureMeasurementDegC' before the agent sends a
notification.
degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.5
lgpEnvTemperatureSetPointDegC
The temperature setting for the well known
'lgpEnvTemperatureDescrDegC' point. This setting may or may not be
the setting used from control. Some systems have the capability to
dynamically change the control setting b…
degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.6
lgpEnvTemperatureDailyHighDegC
The daily high temperature measurement.
degrees CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.7
lgpEnvTemperatureDailyLowDegC
The daily low temperature measurement.
degrees CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.8
lgpEnvTempDailyHighTimeHourDegC
The hours digit of the time corresponding to the daily high
temperature measurement.
hoursInteger32
Constraints:
range: 0-23
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.9
lgpEnvTempDailyHighTimeMinuteDegC
The minutes digit of the time corresponding to the daily high
temperature measurement.
minutesInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.10
lgpEnvTempDailyHighTimeSecondDegC
The seconds digit of the time corresponding to the daily high
temperature measurement.
secondsInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.11
lgpEnvTempDailyLowTimeHourDegC
The hours digit of the time corresponding to the daily low
temperature measurement.
hoursInteger32
Constraints:
range: 0-23
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.12
lgpEnvTempDailyLowTimeMinuteDegC
The minutes digit of the time corresponding to the daily low
temperature measurement.
minutesInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.13
lgpEnvTempDailyLowTimeSecondDegC
The seconds digit of the time corresponding to the daily low
temperature measurement.
secondsInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.14
lgpEnvTemperatureMeasurementTenthsDegC
The measured temperature value.
.1 degrees CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.50
lgpEnvTemperatureHighThresholdTenthsDegC
The high temperature notification threshold. This is the maximum
value of 'lgpEnvTemperatureMeasurementTenthsDegC' before the agent sends a
notification.
.1 degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.51
lgpEnvTemperatureLowThresholdTenthsDegC
The low temperature notification threshold. This is the minimum
value of 'lgpEnvTemperatureMeasurementTenthsDegC' before the agent sends a
notification.
.1 degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.52
lgpEnvTemperatureSetPointTenthsDegC
The temperature setting for the well known
'lgpEnvTemperatureDescrDegC' point. This setting may or may not be
the setting used from control. Some systems have the capability to
dynamically change the control setting b…
.1 degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.53
lgpEnvTemperatureDeadBandTenthsDegC
The deadband region around the setpoint value
(lgpEnvTemperatureSetPointTenthsDegC) where no heating or cooling will occur.
.1 degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.60
lgpEnvTempHeatingPropBandTenthsDegC
The proportional region below the setpoint value
(lgpEnvTemperatureSetPointTenthsDegC) where heating will be
proportionally controlled.
.1 degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.61
lgpEnvTempCoolingPropBandTenthsDegC
The proportional region above the setpoint value
(lgpEnvTemperatureSetPointTenthsDegC) where cooling will be
proportionally controlled.
.1 degrees CelsiusSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.1.3.3.1.62

lgpEnvHumidityTableRel

table
.1.3.6.1.4.1.476.1.42.3.4.2.2.3 · 1 row entry · 20 columns
Open in standard view
Uses the liebert variant from /opt/observium/mibs/liebert.
Command help
Walk lgpEnvHumidityTableRel
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-ENVIRONMENTAL-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvHumidityTableRel' 
A list of humidity table entries.  The table contains zero, one,
or many rows, depending upon the number of humidity objects available.
The NMS cannot create or delete rows from the table. The rows are
created by the agent based upon the capabilities of the managed device.
lgpEnvHumidityEntryRel row .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1
This entry defines the contents of the rows for the table
'lgpEnvHumidityTableRel'.
Indexes
Column Syntax OID
lgpEnvHumidityIdRel
This OID is used as an index to identify a row in the table
'lgpEnvHumidityTableRel'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.1
lgpEnvHumidityDescrRel
A reference to a humidity description object. The object
referenced should not be accessible, but rather be used
to provide a unique description of the humidity.
ObjectIdentifier .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.2
lgpEnvHumidityMeasurementRel
The measured humidity value.
percent Relative HumiditySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.3
lgpEnvHumidityHighThresholdRel
The high humidity notification threshold. This is the maximum
value of 'lgpEnvHumidityMeasurementRel' before the agent sends a
notification.
percent Relative HumiditySNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.4
lgpEnvHumidityLowThresholdRel
The low humidity notification threshold. This is the minimum
value of 'lgpEnvHumidityMeasurementRel' before the agent sends a
notification.
percent Relative HumiditySNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.5
lgpEnvHumiditySetPoint
The humidity setting used to control the well known humidity
object 'lgpEnvHumidityDescrRel'. This setting may or may not be
the setting used from control. Some systems have the capability to
dynamically change the co…
percent Relative HumiditySNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.6
lgpEnvHumidityDailyHigh
The daily high relative humidity measurement.
percent Relative HumiditySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.7
lgpEnvHumidityDailyLow
The daily low relative humidity measurement.
percent Relative HumiditySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.8
lgpEnvHumidityDailyHighTimeHour
The hours digit of the time corresponding to the daily high
humidity measurement.
hoursInteger32
Constraints:
range: 0-23
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.9
lgpEnvHumidityDailyHighTimeMinute
The minutes digit of the time corresponding to the daily high
humidity measurement.
minutesInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.10
lgpEnvHumidityDailyHighTimeSecond
The seconds digit of the time corresponding to the daily high
humidity measurement.
secondsInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.11
lgpEnvHumidityDailyLowTimeHour
The hours digit of the time corresponding to the daily low humidity measurement.
hoursInteger32
Constraints:
range: 0-23
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.12
lgpEnvHumidityDailyLowTimeMinute
The minutes digit of the time corresponding to the daily low
humidity measurement.
minutesInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.13
lgpEnvHumidityDailyLowTimeSecond
The seconds digit of the time corresponding to the daily low humidity measurement.
secondsInteger32
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.14
lgpEnvHumidityDeadBand
The deadband region around the setpoint value
(lgpEnvHumiditySetPoint) where no humidifying or dehumidifying will occur.
percent Relative HumiditySNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.15
lgpEnvHumidifyPropBand
The proportional region below the setpoint value
(lgpEnvHumiditySetPoint) where humidifying will be
proportionally controlled.
percent Relative HumiditySNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.16
lgpEnvDehumidifyPropBand
The proportional region above the setpoint value
(lgpEnvHumiditySetPoint) where dehumidifying will be
proportionally controlled.
percent Relative HumiditySNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.17
lgpEnvHumidityMeasurementRelTenths
The measured humidity value.
.1 percent Relative HumiditySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.50
lgpEnvHumidityHighThresholdRelTenths
The high humidity notification threshold. This is the maximum
value of 'lgpEnvHumidityMeasurementRelTenths' before the agent sends a
notification.
.1 percent Relative HumiditySNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.51
lgpEnvHumidityLowThresholdRelTenths
The low humidity notification threshold. This is the minimum
value of 'lgpEnvHumidityMeasurementRelTenths' before the agent sends a
notification.
.1 percent Relative HumiditySNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.2.2.3.1.52

lgpEnvComponentStateTable

table
.1.3.6.1.4.1.476.1.42.3.4.3.50 · 1 row entry · 3 columns
Open in standard view
Uses the liebert variant from /opt/observium/mibs/liebert.
Command help
Walk lgpEnvComponentStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-ENVIRONMENTAL-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvComponentStateTable' 
This table contains a list of the units components that have
a state associated with them.
The table contains zero, one, or more rows, depending
upon the number of components associated with the unit.
The NMS cannot create or delete rows in the table. The rows are
created by the agent based upon the capabilities of the units
being monitored.
lgpEnvComponentStateEntry row .1.3.6.1.4.1.476.1.42.3.4.3.50.1
This entry defines the attributes to be populated in the
various columns of the 'lgpEnvComponentStateTable'.
Indexes
Column Syntax OID
lgpEnvComponentStateIndex
This is the index indicating the nth element of the table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.3.50.1.1
lgpEnvComponentStateDescr
A reference to a component description object. The object
referenced should not be accessible, but rather be used
to provide a unique description of the component being
described in the row of the table.
ObjectIdentifier .1.3.6.1.4.1.476.1.42.3.4.3.50.1.2
lgpEnvComponentState
not-specified
The state of the component is unknown.
on
The component is on.
off
The component is off.
Enumeration
Enumerated Values:
0not-specified
1on
2off
 .1.3.6.1.4.1.476.1.42.3.4.3.50.1.3

lgpEnvValveTable

table
.1.3.6.1.4.1.476.1.42.3.4.3.70 · 1 row entry · 4 columns
Open in standard view
Uses the liebert variant from /opt/observium/mibs/liebert.
Command help
Walk lgpEnvValveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-ENVIRONMENTAL-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvValveTable' 
This table contains a list of the unit valves that have
information associated with them.
The table contains zero, one, or more rows, depending
upon the number of valves associated with the unit.
The NMS cannot create or delete rows in the table. The rows are
created by the agent based upon the capabilities of the units
being monitored.
lgpEnvValveEntry row .1.3.6.1.4.1.476.1.42.3.4.3.70.1
This entry defines the attributes to be populated in the
various columns of the 'lgpEnvValveTable'.
Indexes
Column Syntax OID
lgpEnvValveIndex
This is the index indicating the nth element of the table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.3.70.1.1
lgpEnvValveDescr
A reference to a valve description object. The object
referenced should not be accessible, but rather be used
to provide a unique description of the valve being
described in the row of the table.
ObjectIdentifier .1.3.6.1.4.1.476.1.42.3.4.3.70.1.2
lgpEnvValveState
not-specified
The state of the component is unknown.
open
The valve is open.
off
The valve is closed.
Enumeration
Enumerated Values:
0not-specified
1open
2closed
 .1.3.6.1.4.1.476.1.42.3.4.3.70.1.3
lgpEnvValvePositionTenths
This gives a value describing the position of the valve.
.1 percentSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.3.70.1.20

lgpEnvOperationalTimeTable

table
.1.3.6.1.4.1.476.1.42.3.4.4.32 · 1 row entry · 6 columns
Open in standard view
Uses the liebert variant from /opt/observium/mibs/liebert.
Command help
Walk lgpEnvOperationalTimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-ENVIRONMENTAL-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvOperationalTimeTable' 
A list of environmental operational time ranges for a given
environmental unit.  The entries in this table may be duplicated from
values in the 'lgpEnvStatistics' group.
          
This table contains zero, one, or many rows, depending upon the number
of 'lgpEnvOperationTimePoint' and 'lgpEnvOperationTimeSubID' available
in the table.
          
The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.
lgpEnvOperationalTimeEntry row .1.3.6.1.4.1.476.1.42.3.4.4.32.1
This entry defines the contents of the columns for the table
'lgpEnvOperationalTimeTable'.
Indexes
Column Syntax OID
lgpEnvOperationTimeIndex
This is the index indicating the nth element of the table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.4.32.1.1
lgpEnvOperationTimePoint
An OID representing a well known operation point.
These object identifiers can indicate a point, location, or mode
of an operation for which a measurement is recorded. The OID's
name usually implies a location of the m…
ObjectIdentifier .1.3.6.1.4.1.476.1.42.3.4.4.32.1.2
lgpEnvOperationTimeSubID
This is a sub identifier for the 'lgpEnvOperationPoint'.
It indicates the instance number of the well known operation
point. For example, a system could have two fans installed.
This variable would identify fan 1 with …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.4.32.1.3
lgpEnvOperationTimeUnit
An OID representing a well known operation time unit type.
These object identifiers indicate the units of the operation time.
The OID's name usually implies a measurement type such as
'lgpEnvHours', etc.
ObjectIdentifier .1.3.6.1.4.1.476.1.42.3.4.4.32.1.4
lgpEnvOperationTimeValue
The actual operation time value of the
'lgpEnvOperationTimePoint'.
If multiple operation times are available for a
'lgpEnvOperationTimePoint' the 'lgpEnvOperationTimeSubID' will
differentiate between them.
hoursSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.4.32.1.5
lgpEnvOperationTimeHighWarning
The high warning time of the operation designated by the
'lgpEnvOperationTimePoint'. If operation times are available at
a single 'lgpEnvOperationTimePoint' the 'lgpEnvOperationTimeSubID'
will differentiate between the…
hoursSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.4.32.1.6

lgpEnvSleepIntervalTimeTable

table
.1.3.6.1.4.1.476.1.42.3.4.5.3 · 1 row entry · 6 columns
Open in standard view
Uses the liebert variant from /opt/observium/mibs/liebert.
Command help
Walk lgpEnvSleepIntervalTimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-ENVIRONMENTAL-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvSleepIntervalTimeTable' 
A sleep time interval table containing a list of the start and stop
times to be used to take a device online or offline.
          
The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.
lgpEnvSleepIntervalTimeEntry row .1.3.6.1.4.1.476.1.42.3.4.5.3.1
This entry defines the contents of the columns for the table
'lgpEnvSleepIntervalTimeTable'.
Indexes
Column Syntax OID
lgpEnvSleepTimeIndex
This is the index indicating the row of the table
'lgpEnvSleepIntervalTimeTable'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.5.3.1.1
lgpEnvSleepTimeSubID
This is a sub identifier for each 'lgpEnvSleepIntervalTimeEntry'.
It indicates the instance number of the
'lgpEnvSleepIntervalTimeEntry'.
For example, a system could have two sleep intervals and the first
interval's sub…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.5.3.1.2
lgpEnvSleepTimeStartHour
This is the hours digit of the time when the system will be put
online.
hourInteger32r/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.476.1.42.3.4.5.3.1.3
lgpEnvSleepTimeStartMinute
This is the minutes digit of the time when the system will be put
online.
minuteInteger32r/w
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.5.3.1.4
lgpEnvSleepTimeStopHour
This is the hours digit containing the time when the system will
be taken offline.
hourInteger32r/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.476.1.42.3.4.5.3.1.5
lgpEnvSleepTimeStopMinute
This is the minutes digit containing the time when the system
will be taken offline.
minuteInteger32r/w
Constraints:
range: 0-59
 .1.3.6.1.4.1.476.1.42.3.4.5.3.1.6

lgpEnvSleepDayTable

table
.1.3.6.1.4.1.476.1.42.3.4.5.4 · 1 row entry · 3 columns
Open in standard view
Uses the liebert variant from /opt/observium/mibs/liebert.
Command help
Walk lgpEnvSleepDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-ENVIRONMENTAL-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvSleepDayTable' 
A sleep table containing a list of the days of the week the system
will be offline.
          
The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.
lgpEnvSleepDayEntry row .1.3.6.1.4.1.476.1.42.3.4.5.4.1
This entry defines the contents of the columns for the table
'lgpEnvSleepDayTable'.
Indexes
Column Syntax OID
lgpEnvSleepDayIndex
This is the index indicating the row of the table
'lgpEnvSleepDayTable'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.5.4.1.1
lgpEnvSleepDay
This is a sub identifier for the day of the week within
'lgpEnvSleepDayTable'.
Enumeration
Enumerated Values:
1sunday
2monday
3tuesday
4wednesday
5thursday
6friday
7saturday
 .1.3.6.1.4.1.476.1.42.3.4.5.4.1.2
lgpEnvSleepAllDayEnabled
The all day sleep functionality has been enabled for the
corresponding 'lgpEnvSleepDay' in the 'lgpEnvSleepDayTable'.
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.476.1.42.3.4.5.4.1.3

lgpEnvRemoteSensorTable

table
.1.3.6.1.4.1.476.1.42.3.4.9.10 · 1 row entry · 6 columns
Open in standard view
Uses the liebert variant from /opt/observium/mibs/liebert.
Command help
Walk lgpEnvRemoteSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LIEBERT-GP-ENVIRONMENTAL-MIB' -M '/opt/observium/mibs/liebert:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LIEBERT-GP-ENVIRONMENTAL-MIB::lgpEnvRemoteSensorTable' 
This table contains a list of remote sensors attached to the
environmental unit. The table contains zero, one, or more rows,
depending upon the number of sensors attached to the unit.
lgpEnvRemoteSensorEntry row .1.3.6.1.4.1.476.1.42.3.4.9.10.1
This entry defines the attributes to be populated in the
various columns of the 'lgpEnvRemoteSensorTable'.
Indexes
Column Syntax OID
lgpEnvRemoteSensorIndex
This is the index indicating the nth element of the table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.9.10.1.1
lgpEnvRemoteSensorId
This is the sensor number identifying the sensor.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.476.1.42.3.4.9.10.1.2
lgpEnvRemoteSensorMode
Function assigned to remote sensor. When set to control(2) the
sensor will be used in calculation of remote sensor temperature which
may be used for heating and cooling control. When set to disable(0)
the remote senso…
Enumerationr/w
Enumerated Values:
0disable
1reference
2control
 .1.3.6.1.4.1.476.1.42.3.4.9.10.1.3
lgpEnvRemoteSensorUsrLabel
User assigned remote sensor label.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.476.1.42.3.4.9.10.1.4
lgpEnvRemoteSensorTempMeasurementDegF
Temperature measured at the temperature sensor reported in
degrees Fahrenheit.
degrees FahrenheitSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.9.10.1.5
lgpEnvRemoteSensorTempMeasurementDegC
Temperature measured at the temperature sensor reported in
degrees Celsius.
degrees CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.476.1.42.3.4.9.10.1.6