LEXMARK-SETTINGS-DEFINITION Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

npaIdTable

table

.1.3.6.1.4.1.641.7.3.1 · 1 row entry · 1 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk npaIdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::npaIdTable'

A table of settings NPA IDs that have been returned.

npaIdEntry row .1.3.6.1.4.1.641.7.3.1.1

An entry of the npaIdTable.

Indexes

No indexes recorded

Column	Syntax	OID
npaIdIndex A unique value used to identify this settingsDefinition entry index.	Integer32	`.1.3.6.1.4.1.641.7.3.1.1.1`

settingTable

table

.1.3.6.1.4.1.641.7.3.2 · 1 row entry · 11 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk settingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::settingTable'

A table defining the setting attributes that are dependent only on the
selected NPA ID index value. This information will permit usage and
presentation of these settings by a remote tool.

settingEntry row .1.3.6.1.4.1.641.7.3.2.1

An entry containing a setting attribute definition.

Indexes

No indexes recorded

Column Syntax OID

settingName

Setting 'public name' definition. This is for tool usage and
comparison of the setting definition to previous access methods.

OctetString

.1.3.6.1.4.1.641.7.3.2.1.1

settingVccId

VCC setting Name if it exists.

OctetString

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.641.7.3.2.1.2

settingGroup

The Settings Group Identifier allows the remote tool to logically
group settings into categories if desired.

SettingsGroupTC

Constraints:
range: 1-2147483647

Type Values:

1	ftp
2	copy
3	email
4	network
5	usb
6	color
7	device
8	ports
9	auth
10	audit
11	scan
12	scanHw
13	paper
14	scanQuality
15	output
16	input
17	alerts
18	engine
19	cartridge
20	fax
21	faxMedia
22	faxQuality
23	printHw
24	lexconnect
25	securityGen
26	usage
27	esf
28	pageLayout
29	photo
30	print
31	printMedia
32	supplies
33	ui
34	secureNet
35	servers
36	adapters
37	interfaces
38	pcl
39	debug
40	ps
41	ppds
42	finisher
43	ocr
44	accessibility
45	csf
46	logging
47	internal
50	undefined

.1.3.6.1.4.1.641.7.3.2.1.3

settingAccess

Indicates the access level (RO, RW, or W)

Enumeration

.1.3.6.1.4.1.641.7.3.2.1.4

settingReboot

Integer that indicates whether a reboot is required for
activation or whether a change triggers a reboot

Enumeration

.1.3.6.1.4.1.641.7.3.2.1.5

settingDescription

Setting description string

OctetString

.1.3.6.1.4.1.641.7.3.2.1.6

settingNpaId

NPA ID value that is used for the index in an accessible field.

Integer32

.1.3.6.1.4.1.641.7.3.2.1.7

settingIdValue

ID for the Setting Name, permitting identification of the display
string assigned to this setting.. For future use.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.641.7.3.2.1.8

settingIdStringName

The text string associated with the settingIdValue. For future use.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.641.7.3.2.1.9

settingIdLocalizedString

The localized text string associated with the settingIdValue, using
the language selection specified in the LEXMARK-SETTINGS-CONTROL MIB.
For future use.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.641.7.3.2.1.10

settingType

Specifies the type of this setting and must be looked at as a bit field. The first 3 bits are used to determine whether the Integer, String or Octet setting entries in the settingValueTable are to be used for return of …

Integer32

.1.3.6.1.4.1.641.7.3.2.1.11

settingValueTable

table

.1.3.6.1.4.1.641.7.3.3 · 1 row entry · 8 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk settingValueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::settingValueTable'

A table defining the current and default values for the setting. The
settingValueIndex is only used for settings that are indexed, storing
multiple values associated with one setting name. Most settings are
not indexed and return a single scalar result (settingValueIndex=1).

settingValueEntry row .1.3.6.1.4.1.641.7.3.3.1

An entry containing a setting attribute definition.

Indexes

No indexes recorded

Column	Syntax	OID
settingValueIndex A unique value used to indicate the row of this table.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.641.7.3.3.1.1`
settingNpaIndex For settings which have a single value associated with them (non-indexed) this will have a value of 0. For settings which have more than one value associated with them (indexed), the first indexed entry will have a va…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.641.7.3.3.1.2`
settingCurrentValueIfInteger Current value for the setting if the setting returns an integer result. Otherwise, this column will not be returned .	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.641.7.3.3.1.3`
settingCurrentValueIfString Current value for the setting if the setting returns a string result. Otherwise, this column will not be returned .	OctetStringr/w	`.1.3.6.1.4.1.641.7.3.3.1.4`
settingCurrentValueIfOctet Current value for the setting if the setting returns an octet result. Otherwise, this column will not be returned .	OctetStringr/w Constraints: `range: 1-256`	`.1.3.6.1.4.1.641.7.3.3.1.5`
settingFactoryDefaultIfInteger Factory Default Value for the setting if the setting returns an integer result. Otherwise, this column will not be returned.	SNMPv2-SMIInteger32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.641.7.3.3.1.6`
settingFactoryDefaultIfString Factory Default Value for the setting if the setting returns a string result. Otherwise, this column will not be returned.	OctetString	`.1.3.6.1.4.1.641.7.3.3.1.7`
settingFactoryDefaultIfOctet Factory Default Value for the setting if the setting returns an octet result. Otherwise, this column will not be returned.	OctetString Constraints: `range: 1-65535`	`.1.3.6.1.4.1.641.7.3.3.1.8`

valueRangeTable

table

.1.3.6.1.4.1.641.7.3.4 · 1 row entry · 4 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk valueRangeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::valueRangeTable'

A table of value ranges for a setting which returns an integer result. 
          
NOTE: If the 'signed' bit of settingType (in the settingTable) is 1 for the given setting, then clients must interpret valueRangeMin, valueRangeMax and valueRangeIncrement as signed integers. Otherwise, clients must interpret these as unsigned integers.

valueRangeEntry row .1.3.6.1.4.1.641.7.3.4.1

An entry of the valueRangeTable.

Indexes

No indexes recorded

Column	Syntax	OID
valueRangeMin Minimum value.	Integer32	`.1.3.6.1.4.1.641.7.3.4.1.1`
valueRangeMax Max value.	Integer32	`.1.3.6.1.4.1.641.7.3.4.1.2`
valueRangeIncrement How much a value increments.	Integer32	`.1.3.6.1.4.1.641.7.3.4.1.3`
valueRangeDecimalPlaces How many decimal places do I have?	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.641.7.3.4.1.4`

enumValuesTable

table

.1.3.6.1.4.1.641.7.3.5 · 1 row entry · 7 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk enumValuesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::enumValuesTable'

A table of enumeration values.

enumValuesEntry row .1.3.6.1.4.1.641.7.3.5.1

An entry of the EnumValuesTable.

Indexes

No indexes recorded

Column Syntax OID

enumValuesIndex

A unique value used to identify this enumValuesEntry
index.

Integer32

.1.3.6.1.4.1.641.7.3.5.1.1

enumValuesValueIfInt

Integer enum value. This column is not returned if the setting is a string enumeration.

Integer32

.1.3.6.1.4.1.641.7.3.5.1.2

enumValuesName

String setting value name that is derived from the VCC value name.

SNMPv2-TCDisplayString

Constraints:
range: 0-128

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.641.7.3.5.1.3

enumValuesTextIdValue

raw integer giving Text-ID value for the enum. For
potential future usage. Note: if value is 0, then use
enumTextIdLocalized string.

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.641.7.3.5.1.4

enumValuesTextIdString

Text-ID identifier string for the enum. For potential
future usage. Note: if value is null, then use
enumTextIdLocalized string.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.641.7.3.5.1.5

enumValuesTextIdLocalized

Localized Text-ID string for the enum. For potential future
usage

SNMPv2-TCDisplayString

Enumerated Values:

1	readOnly
2	readWrite
3	writeOnly

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.641.7.3.5.1.6

enumValuesValueIfString

String enumeration value. This column is not returned if the setting is an integer enumeration.

SNMPv2-TCDisplayString

Enumerated Values:

0	null
1	trigger
2	required

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.641.7.3.5.1.7

limitsTable

table

.1.3.6.1.4.1.641.7.3.6 · 1 row entry · 3 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk limitsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::limitsTable'

A table of limits that is utilized when the setting value
returned is a string or octet.

limitsEntry row .1.3.6.1.4.1.641.7.3.6.1

An entry of the limitsTable.

Indexes

No indexes recorded

Column	Syntax	OID
limitsMaxLength The maximum length of a string or octet in bytes.	Integer32	`.1.3.6.1.4.1.641.7.3.6.1.1`
limitsMinLength The minimum length of a string or octet in bytes.	Integer32	`.1.3.6.1.4.1.641.7.3.6.1.2`
regularExpression The specific textual syntax that this setting needs to conform to.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.641.7.3.6.1.3`

querySettingTable

table

.1.3.6.1.4.1.641.7.3.7.2 · 1 row entry · 11 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk querySettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::querySettingTable'

A table defining the setting attributes that are dependent only on the
selected NPA ID index value. This information will permit usage and
presentation of these settings by a remote tool.

querySettingEntry row .1.3.6.1.4.1.641.7.3.7.2.1

An entry containing a setting attribute definition.

Indexes

No indexes recorded

Column Syntax OID

querySettingName

Setting 'public name' definition. This is for tool usage and
comparison of the setting definition to previous access methods.

OctetString

.1.3.6.1.4.1.641.7.3.7.2.1.1

querySettingVccId

VCC setting Name if it exists.

OctetString

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.641.7.3.7.2.1.2

querySettingGroup

The Settings Group Identifier allows the remote tool to logically
group settings into categories if desired.

SettingsGroupTC

Constraints:
range: 1-2147483647

Type Values:

1	ftp
2	copy
3	email
4	network
5	usb
6	color
7	device
8	ports
9	auth
10	audit
11	scan
12	scanHw
13	paper
14	scanQuality
15	output
16	input
17	alerts
18	engine
19	cartridge
20	fax
21	faxMedia
22	faxQuality
23	printHw
24	lexconnect
25	securityGen
26	usage
27	esf
28	pageLayout
29	photo
30	print
31	printMedia
32	supplies
33	ui
34	secureNet
35	servers
36	adapters
37	interfaces
38	pcl
39	debug
40	ps
41	ppds
42	finisher
43	ocr
44	accessibility
45	csf
46	logging
47	internal
50	undefined

.1.3.6.1.4.1.641.7.3.7.2.1.3

querySettingAccess

Indicates the access level (RO, RW, or W)

Enumeration

.1.3.6.1.4.1.641.7.3.7.2.1.4

querySettingReboot

Integer that indicates whether a reboot is required for
activation or whether a change triggers a reboot

Enumeration

.1.3.6.1.4.1.641.7.3.7.2.1.5

querySettingDescription

Setting description string

OctetString

.1.3.6.1.4.1.641.7.3.7.2.1.6

querySettingNpaId

NPA ID value that is used for the index in an accessible field.

Integer32

.1.3.6.1.4.1.641.7.3.7.2.1.7

querySettingIdValue

ID for the Setting Name, permitting identification of the display
string assigned to this setting.. For future use.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.641.7.3.7.2.1.8

querySettingIdStringName

The text string associated with the settingIdValue. For future use.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.641.7.3.7.2.1.9

querySettingIdLocalizedString

The localized text string associated with the querySettingIdValue, using
the language selection specified in the LEXMARK-SETTINGS-CONTROL MIB.
For future use.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.641.7.3.7.2.1.10

querySettingType

Integer32

.1.3.6.1.4.1.641.7.3.7.2.1.11

querySettingValueTable

table

.1.3.6.1.4.1.641.7.3.7.3 · 1 row entry · 8 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk querySettingValueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::querySettingValueTable'

A table defining the current and default values for the setting. The
querySettingIndex is only used for settings that are indexed, storing
multiple values associated with one setting name. Most settings are
not indexed and return a single scalar result (settingValueIndex=1).

querySettingValueEntry row .1.3.6.1.4.1.641.7.3.7.3.1

An entry containing a setting attribute definition.

Indexes

No indexes recorded

Column	Syntax	OID
querySettingValueIndex A unique value used to identify this querySettingEntry index.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.641.7.3.7.3.1.1`
querySettingNpaIndex For settings which have a single value associated with them (non-indexed) this will have a value of 0. For settings which have more than one value associated with them (indexed), the first indexed entry will have a va…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.641.7.3.7.3.1.2`
querySettingCurValIfInt Current value for the setting if the setting returns an integer result. Otherwise, this column will not be returned .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.641.7.3.7.3.1.3`
querySettingCurrentValueIfString Current value for the setting if the setting returns a string result. Otherwise, this column will not be returned .	OctetString	`.1.3.6.1.4.1.641.7.3.7.3.1.4`
querySettingCurValIfOctet Current value for the setting if the setting returns an octet result. Otherwise, this column will not be returned.	OctetString Constraints: `range: 1-256`	`.1.3.6.1.4.1.641.7.3.7.3.1.5`
querySettingFactDefIfInt Factory Default Value for the setting if the setting returns an integer result. Otherwise, this column will not be returned.	SNMPv2-SMIInteger32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.641.7.3.7.3.1.6`
querySettingFactDefIfString Factory Default Value for the setting if the setting returns a string result. Otherwise, this column will not be returned.	OctetString	`.1.3.6.1.4.1.641.7.3.7.3.1.7`
querySettingFactDefIfOctet Factory Default Value for the setting if the setting returns an octet result. Otherwise, this column will not be returned.	OctetString Constraints: `range: 1-65535`	`.1.3.6.1.4.1.641.7.3.7.3.1.8`

queryValueRangeTable

table

.1.3.6.1.4.1.641.7.3.7.4 · 1 row entry · 4 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk queryValueRangeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::queryValueRangeTable'

A table of value ranges for a setting which returns an integer result. 
          
NOTE: If the 'signed' bit of settingType (in the settingTable) is 1 for the given setting, then clients must interpret valueRangeMin, valueRangeMax and valueRangeIncrement as signed integers. Otherwise, clients must interpret these as unsigned integers.

queryValueRangeEntry row .1.3.6.1.4.1.641.7.3.7.4.1

An entry of the queryValueRangeTable.

Indexes

No indexes recorded

Column	Syntax	OID
queryValueRangeMin Minimum value.	Integer32	`.1.3.6.1.4.1.641.7.3.7.4.1.1`
queryValueRangeMax Max value.	Integer32	`.1.3.6.1.4.1.641.7.3.7.4.1.2`
queryValueRangeIncrement How much a value increments.	Integer32	`.1.3.6.1.4.1.641.7.3.7.4.1.3`
queryValueRangeDecimalPlaces How many decimal places do I have?	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.641.7.3.7.4.1.4`

queryEnumValuesTable

table

.1.3.6.1.4.1.641.7.3.7.5 · 1 row entry · 7 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk queryEnumValuesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::queryEnumValuesTable'

A table of enumeration values.

queryEnumValuesEntry row .1.3.6.1.4.1.641.7.3.7.5.1

An entry of the EnumValuesTable.

Indexes

No indexes recorded

Column	Syntax	OID
queryEnumValuesIndex A unique value used to identify this queryEnumValuesEntry index.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.641.7.3.7.5.1.1`
queryEnumValuesValueIfInt Integer enum value. This column is not returned if the setting is a string enumeration	Integer32	`.1.3.6.1.4.1.641.7.3.7.5.1.2`
queryEnumValuesName String setting value name that is derived from the VCC value name.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.641.7.3.7.5.1.3`
queryEnumValuesTextIdValue raw integer giving Text-ID value for the enum. For potential future usage. Note: if value is 0, then use enumTextIdLocalized string.	Integer32	`.1.3.6.1.4.1.641.7.3.7.5.1.4`
queryEnumValuesTextIdString Text-ID identifier string for the enum. For potential future usage. Note: if value is null, then use enumTextIdLocalized string.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.641.7.3.7.5.1.5`
queryEnumValuesTextIdLocalized Localized Text-ID string for the enum. For potential future usage	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.641.7.3.7.5.1.6`
queryEnumValuesValueIfString String enumeration value. This column is not returned if the setting is an integer enumeration	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.641.7.3.7.5.1.7`

queryLimitsTable

table

.1.3.6.1.4.1.641.7.3.7.6 · 1 row entry · 3 columns

Open in standard view

Uses the lexmark variant from /opt/observium/mibs/lexmark.

Command help

Walk queryLimitsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LEXMARK-SETTINGS-DEFINITION' -M '/opt/observium/mibs/lexmark:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LEXMARK-SETTINGS-DEFINITION::queryLimitsTable'

A table of limits that is utilized when the setting value
returned is a String or Octet.

queryLimitsEntry row .1.3.6.1.4.1.641.7.3.7.6.1

An entry of the limitsTable.

Indexes

No indexes recorded

Column	Syntax	OID
queryLimitsMaxLength The maximum length of a string or octet in bytes.	Integer32	`.1.3.6.1.4.1.641.7.3.7.6.1.1`
queryLimitsMinLength The minimum length of a string or octet in bytes.	Integer32	`.1.3.6.1.4.1.641.7.3.7.6.1.2`
queryRegularExpression The specific textual syntax that this setting needs to conform to.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.641.7.3.7.6.1.3`