L2L3-VPN-MCAST-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
6
.1.3.6.1.4.1.2636.5.11.1.1.1.1
·
1 row entry
·
6 columns
Uses the juniper variant from
Command help
/opt/observium/mibs/juniper.
Walk jnxL2L3VpnMcastPmsiTunnelAttributeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'L2L3-VPN-MCAST-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'L2L3-VPN-MCAST-MIB::jnxL2L3VpnMcastPmsiTunnelAttributeTable'
This table is for advertised/received PMSI attributes, to be referred to by I-PMSI or S-PMSI table entries
An entry in this table corresponds to an PMSI attribute
that is advertised/received on this router.
For BGP-based signaling (for I-PMSI via auto-discovery
procedure, or for S-PMSI via S-PMSI A-D routes),
they are just a…
that is advertised/received on this router.
For BGP-based signaling (for I-PMSI via auto-discovery
procedure, or for S-PMSI via S-PMSI A-D routes),
they are just a…
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
For UDP-based S-PMSI signaling for PIM-MVPN, this is 0.
For BGP-based I/S-PMSI signaling, per RFC 6514 section 5, 'PMSI Tunnel Attribute': The Flags field has the following format: … |
OctetString Constraints: range: 1-1 |
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.1 |
||||||||||||||||
|
For BGP-based I/S-PMSI signaling for either PIM or BGP-MVPN,
per RFC 6514 section 5, 'PMSI Tunnel Attribute': The Tunnel Type identifies the type of the tunneling technology used to establish the PMSI tun… |
JnxL2L3VpnMcastProviderTunnelType Type Values:
|
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.2 |
||||||||||||||||
|
For BGP-based I/S-PMSI signaling,
per RFC 6514 section 5, 'PMSI Tunnel Attribute': If the MPLS Label field is non-zero, then it contains an MPLS label encoded as 3 octets, where the high-order 20 bits con… |
MPLS-TC-STD-MIBMplsLabel Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.3 |
||||||||||||||||
|
For BGP-based signaling, as defined in RFC 6514 section 5,
'PMSI Tunnel Attribute'. For UDP-based S-PMSI signaling for PIM-MVPN, RFC 6513 only specifies the 'P-Group' address, and that is filled into the … |
OctetString Constraints: range: 0-37 |
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.4 |
||||||||||||||||
|
If the tunnel exists in some MIB table, this is the row pointer
to it. |
SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable… |
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.5 |
||||||||||||||||
|
If the tunnel has a corresponding interface, this is the
row pointer to the ifName table. |
SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable… |
.1.3.6.1.4.1.2636.5.11.1.1.1.1.1.6 |
