Juniper-TSM-MIB Table View

This table allows dynamic server ports to be configured and also
provides information about static ports available in the system.
This table represents all ports known to the system.  The presence
of a port in this table does not guarantee that a card with this port
is present in the chassis.

juniTsmPortEntry row .1.3.6.1.4.1.4874.2.2.72.1.1.2.1

Configuration data.

Indexes

juniTsmPortLocation

Column	Syntax	OID
juniTsmPortLocation The value of a port location.	JuniTsmLocationValue Type Constraints: range: 1..16	.1.3.6.1.4.1.4874.2.2.72.1.1.2.1.1
juniTsmPortType The port type: generalPurposeStatic - statically configured (always on) port, generalPurposeDynamic - dynamic port, which could be both configured with different maximum number …	Enumeration Enumerated Values: 1 generalPurposeStatic 2 generalPurposeDynamic 3 securityStatic 4 securityDynamic	.1.3.6.1.4.1.4874.2.2.72.1.1.2.1.2
juniTsmPortHwPresent The port hardware is inserted.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.72.1.1.2.1.3
juniTsmPortAvailableInterfaces Maximum number of interfaces available on the port.	Integer32 Constraints: range: 1-16000	.1.3.6.1.4.1.4874.2.2.72.1.1.2.1.4
juniTsmPortProvisionedInterfaces Number of interfaces provisioned on the port. '-1' means all available interfaces. If port is static this value cannot be changed. If the number of provisioned interfaces is decreased it may require a lengthy 'drainin…	Integer32r/w Constraints: range: -1-16000	.1.3.6.1.4.1.4874.2.2.72.1.1.2.1.5

This table describes currently registered applications.

juniTsmAppRegistryEntry row .1.3.6.1.4.1.4874.2.2.72.1.1.3.1

Application data.

Indexes

juniTsmAppRegistryIndex

Column	Syntax	OID
juniTsmAppRegistryIndex A small integer identifying registered application. Once an application is registered, this integer will be associated with the application until the next reboot.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4874.2.2.72.1.1.3.1.1
juniTsmAppRegistryIfType Interface type associated with the application.	Juniper-UNI-IF-MIBJuniIfType Type Values: 0 ip 1 ppp 2 ds0 3 ds1 4 ds3 5 frameRelay 6 ethernet 7 sonet 8 sonetPath 9 atm 10 aal5 11 atmSubInterface 12 ft1 13 hdlc 14 ipLoopback 15 ipVirtual 16 frSubInterface 17 pppoe 18 pppoeSubInterface 19 bridgedEthernet 20 l2tpTunnelInterface 21 l2tpSessionInterface 22 mlPppLinkInterface 23 slepInterface 24 l2tpDestinationInterface 25 mplsMajorInterface 26 mplsMinorInterface 27 mlPppNetworkInterface 28 ethernetSubInterface 29 multilinkFrameRelayInterface 30 ipTunnelInterface 31 serverPortInterface 32 smdsInterface 33 sonetVTInterface 34 vlanMajorInterface 35 vlanSubInterface 36 cbfInterface 37 gtpInterface 38 smdsMajorInterface 39 smdsSubInterface 40 l2fTunnelInterface 41 l2fSessionInterface 42 l2fDestinationInterface 43 ipsecInterface 44 sgInterface 45 mplsL2ShimInterface 47 lacGenInterface 48 bridgeInterface 49 ipsecTransportInterface 50 ipv6Interface 51 ipv6TunnelInterface 52 ipv6Loopback 53 osi 54 lag 55 ipTunnelMdt 145 atmVirtualCircuit 256 pppLink 257 atmActiveSubInterface	.1.3.6.1.4.1.4874.2.2.72.1.1.3.1.2
juniTsmAppRegistryName The name of the application used by the system.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4874.2.2.72.1.1.3.1.3
juniTsmAppRegistryInterfaceLimit The maximum number of interfaces per port this application supports. (The number of interfaces could be further limited by the port capacity.)	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4874.2.2.72.1.1.3.1.4

The entries in this table describe application load on tunnel servers.
This table includes only applications which are actually being used.

juniTsmApplicationEntry row .1.3.6.1.4.1.4874.2.2.72.1.1.4.1

Configuration data.

Indexes

juniTsmPortLocation juniTsmAppRegistryIndex

Column	Syntax	OID
juniTsmApplicationMaxInterfaces Maximum number of interfaces available on the port for the application. Applications allocate interfaces from a common pool, so this is not the only limit of application level interfaces. This value could be greater th…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4874.2.2.72.1.1.4.1.1
juniTsmApplicationActiveInterfaces Number of application interfaces in use on the port. This value could be greater than juniTsmPortProvisionedInterfaces when the port is draining interfaces.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.72.1.1.4.1.2