Juniper-TACACS-Plus-Client-MIB

        The Terminal Access Controller Access Control System Plus (TACACS+)
Client MIB for the Juniper Networks enterprise.
    
Source file
Juniper-TACACS-Plus-Client-MIB
Last revised
Identity
juniTacacsPlusClientMIB
Base OID
1.3.6.1.4.1.4874.2.2.60
Imported Objects
Juniper-MIBs juniMibs
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the junose MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-TACACS-Plus-Client-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-TACACS-Plus-Client-MIB::juniTacacsPlusClientMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-TACACS-Plus-Client-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-TACACS-Plus-Client-MIB::juniTacacsPlusClientMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (37)
.1.3.6.1.4.1.4874.2.2.60
.1.3.6.1.4.1.4874.2.2.60.1
.1.3.6.1.4.1.4874.2.2.60.1.1
Enumeration
.1.3.6.1.4.1.4874.2.2.60.1.1.1
Integer32
.1.3.6.1.4.1.4874.2.2.60.1.1.2
.1.3.6.1.4.1.4874.2.2.60.1.1.3
.1.3.6.1.4.1.4874.2.2.60.1.1.4
.1.3.6.1.4.1.4874.2.2.60.1.2
.1.3.6.1.4.1.4874.2.2.60.1.2.1
.1.3.6.1.4.1.4874.2.2.60.1.2.1.1
.1.3.6.1.4.1.4874.2.2.60.1.2.1.1.1
Integer32
.1.3.6.1.4.1.4874.2.2.60.1.2.1.1.2
.1.3.6.1.4.1.4874.2.2.60.1.2.1.1.3
.1.3.6.1.4.1.4874.2.2.60.1.2.1.1.4
Integer32
.1.3.6.1.4.1.4874.2.2.60.1.2.1.1.5
.1.3.6.1.4.1.4874.2.2.60.1.2.1.1.6
.1.3.6.1.4.1.4874.2.2.60.1.2.1.1.7
.1.3.6.1.4.1.4874.2.2.60.1.2.1.1.8
.1.3.6.1.4.1.4874.2.2.60.1.3
.1.3.6.1.4.1.4874.2.2.60.1.3.1
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.1
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.10
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.11
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.12
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.13
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.2
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.3
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.4
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.5
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.6
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.7
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.8
.1.3.6.1.4.1.4874.2.2.60.1.3.1.1.9
.1.3.6.1.4.1.4874.2.2.60.2
.1.3.6.1.4.1.4874.2.2.60.2.1
.1.3.6.1.4.1.4874.2.2.60.2.2
Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. Juniper-UNI-SMIjunose
  3. Juniper-MIBsjunose
  4. SNMPv2-CONFrfc
  5. SNMPv2-TCrfc
  6. Juniper-TACACS-Plus-Client-MIBjunoseselected
Type Definitions (1)
OctetString range: 0..100
Conformance Groups (4)
This group defines common configuration parameters for all hosts.
.1.3.6.1.4.1.4874.2.2.60.2.2.1
Obsolete group for defining per host configuration parameters.
.1.3.6.1.4.1.4874.2.2.60.2.2.2
This group defines statistics collected on per host basis.
.1.3.6.1.4.1.4874.2.2.60.2.2.3
This group defines per host configuration parameters.
.1.3.6.1.4.1.4874.2.2.60.2.2.4
Compliance Statements (2)

OID .1.3.6.1.4.1.4874.2.2.60.2.1.1
Obsolete compliance statement for entities which implement the Juniper
TACACS+ Client MIB.
Required groups

OID .1.3.6.1.4.1.4874.2.2.60.2.1.2
The compliance statement for entities which implement the Juniper
TACACS+ Client MIB.
Required groups