Juniper-SNMP-MIB
MIB objects for configuring SNMP-based management access into Juniper
E-series products.
- Source file
Juniper-SNMP-MIB- Last revised
- Identity
juniSnmpMIB- Base OID
1.3.6.1.4.1.4874.2.2.16
Imported Objects
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the junose MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-SNMP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-SNMP-MIB::juniSnmpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-SNMP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-SNMP-MIB::juniSnmpMIB'
Objects (80)
Showing 80 of 80 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.4874.2.2.16 |
||
.1.3.6.1.4.1.4874.2.2.16.1 |
||
.1.3.6.1.4.1.4874.2.2.16.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.16.1.1.1 |
|
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.16.1.1.2 |
.1.3.6.1.4.1.4874.2.2.16.1.1.3 |
||
.1.3.6.1.4.1.4874.2.2.16.1.1.3.1 |
||
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.16.1.1.3.2 |
|
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.16.1.1.3.3 |
|
.1.3.6.1.4.1.4874.2.2.16.1.1.3.4 |
||
.1.3.6.1.4.1.4874.2.2.16.1.1.3.5 |
||
.1.3.6.1.4.1.4874.2.2.16.1.1.3.6 |
||
.1.3.6.1.4.1.4874.2.2.16.1.1.3.6.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.16.1.1.3.6.1.1 |
|
.1.3.6.1.4.1.4874.2.2.16.1.1.3.6.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.16.1.1.3.6.1.3 |
|
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.16.1.1.3.6.1.4 |
|
.1.3.6.1.4.1.4874.2.2.16.1.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.16.1.1.5 |
|
.1.3.6.1.4.1.4874.2.2.16.1.1.6 |
||
.1.3.6.1.4.1.4874.2.2.16.1.1.6.1 |
||
.1.3.6.1.4.1.4874.2.2.16.1.1.6.1.1 |
||
.1.3.6.1.4.1.4874.2.2.16.1.1.6.1.2 |
||
.1.3.6.1.4.1.4874.2.2.16.1.1.6.1.3 |
||
.1.3.6.1.4.1.4874.2.2.16.1.2 |
||
.1.3.6.1.4.1.4874.2.2.16.1.2.1 |
||
.1.3.6.1.4.1.4874.2.2.16.1.2.1.1 |
||
.1.3.6.1.4.1.4874.2.2.16.1.2.1.1.1 |
||
.1.3.6.1.4.1.4874.2.2.16.1.2.1.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.16.1.2.1.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.16.1.2.1.1.4 |
|
.1.3.6.1.4.1.4874.2.2.16.1.2.1.1.5 |
||
.1.3.6.1.4.1.4874.2.2.16.1.2.1.1.6 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.1 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.10 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.11 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.12 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.13 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.14 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.15 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.16 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.17 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.17.1 |
||
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.16.1.3.17.1.1 |
|
.1.3.6.1.4.1.4874.2.2.16.1.3.17.1.2 |
||
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.16.1.3.2 |
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.1 |
||
|
MinutesInteger32
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.10 |
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.11 |
||
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.12 |
|
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.13 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.14 |
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.15 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.16 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.17 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.2 |
||
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.3 |
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.5 |
|
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.6 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.7 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.8 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.3.1.9 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.4 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.5 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.6 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.7 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.8 |
||
.1.3.6.1.4.1.4874.2.2.16.1.3.9 |
||
.1.3.6.1.4.1.4874.2.2.16.1.4 |
||
.1.3.6.1.4.1.4874.2.2.16.1.4.1 |
||
.1.3.6.1.4.1.4874.2.2.16.1.4.2 |
||
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.16.1.4.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.16.1.4.4 |
|
.1.3.6.1.4.1.4874.2.2.16.2 |
||
.1.3.6.1.4.1.4874.2.2.16.2.1 |
||
.1.3.6.1.4.1.4874.2.2.16.2.2 |
Dependencies (7) 6 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- Juniper-UNI-SMIjunose
- Juniper-MIBsjunose
- SNMPv2-TCrfc
- Juniper-TCjunose
- SNMPv2-CONFrfc
- SNMP-FRAMEWORK-MIBrfc
- Juniper-SNMP-MIBjunoseselected
Type Definitions (6)
| OctetString |
range: 0..31 Display format:
31aAn IP Access List name. Represents textual information taken from the
NVT ASCII character set. The character repertoire of the string is restricted to printable, non-whitespace characters (codes 33 through 126). |
|
| OctetString |
range: 1..31 Display format:
31aAn SNMP community name. Represents textual information taken from the
NVT ASCII character set. The character repertoire of the string is restricted to printable, non-whitespace characters (codes 33 through 126). |
|
| OctetString |
range: 4 This octet string is interpreted as a bit mask, in which each bit
corresponds to an interface restriction. The DESCRIPTION clause of a MIB object having this SYNTAX should specify the semantics of bit values '1' and '0'. Bit definitions are as follows, where bit 31 is the most significant bit of the first octet, and bit 0 is the least significant bit of the fourth octet: Bit interface restriction ----- ----------------------------------------------- 0 ifAdminStatus Down 1-31 Undefined. |
|
| Enumeration |
eventMgr(1)Identifies a management application:
eventMgr - disman event MIB application |
|
| OctetString |
range: 8 This octet string is interpreted as a bit mask, in which each bit
corresponds to a category of SNMP trap. Bit definitions are as follows, where bit 63 is the most significant bit of the first octet, and bit 0 is the least significant bit of the eighth octet: Bit Category ----- ----------------------------------------------- 0 SNMP standard coldStart/warmStart/authenticationFailure traps 1 Standard linkUp/linkDown traps 2 Platform inventory traps 3 Environment (power, temperature, fan and memory) traps 4 Accounting (bulk statistics) traps 5 File transfer status trap 6 BGP traps 7 Log configuration traps 8 CLI security alert trap 9 Ping traps 10 OSPF traps 11 TraceRoute traps 12 Standard DVMRP traps 13 Proprietary DVMRP trap 14 Local address pool traps 15 ATM ping traps 16 VRRP traps 17 SONET layer traps 18 NTP traps 19 Radius clients trap 20 DisMan Event traps 21 DHCP traps 22 PIM traps 23 High Availability Redundancy traps 24 Route Table traps 25 IP Traps 26 Mirror Traps 27 Vpn Traps 28 Bfd Traps 29 Dos Protection Platform Traps 30 Mrouter Traps 31 Ldp Traps 32 Mobile IPv4 Traps 33 ISSU Traps 34 MPLSTE Traps 35 OSPFV3 Traps 36-63 Undefined. |
|
| Enumeration |
trapEmergency(0)trapAlert(1)trapCritical(2)trapError(3)trapWarning(4)trapNotice(5)trapInformational(6)trapDebug(7)The set of trap severity values:
trapEmergency(0) - system is unusable trapAlert(1) - action must be taken immediately trapCritical(2) - critical conditions trapError(3) - error conditions trapWarning(4) - warning conditions trapNotice(5) - normal but significant condition trapInformational(6) - informational messages trapDebug(7) - debug-level messages |
Conformance Groups (12)
Compliance Statements (9)
OID
.1.3.6.1.4.1.4874.2.2.16.2.1.1Obsolete compliance statement for entities which implement the Juniper
SNMP MIB. This statement became obsolete when View support and Named
Access List support were added.
SNMP MIB. This statement became obsolete when View support and Named
Access List support were added.
Required groups
| mandatory | juniSnmpGroup | |
| mandatory | juniSnmpAuthFailGroup |
OID
.1.3.6.1.4.1.4874.2.2.16.2.1.2Obsolete compliance statement for entities which implement the Juniper
SNMP MIB. This statement became obsolete when juniSnmpInterfaceMode was
added.
SNMP MIB. This statement became obsolete when juniSnmpInterfaceMode was
added.
Required groups
| mandatory | juniSnmpGroup2 | |
| mandatory | juniSnmpAuthFailGroup |
OID
.1.3.6.1.4.1.4874.2.2.16.2.1.3Obsolete compliance statement for entities which implement the Juniper
SNMP MIB. This statement became obsolete when support for interface
compress, trap severities and trap severity filtering was added and
juniSnmpInterfaceMode was obsoleted.
SNMP MIB. This statement became obsolete when support for interface
compress, trap severities and trap severity filtering was added and
juniSnmpInterfaceMode was obsoleted.
Required groups
| mandatory | juniSnmpGroup3 | |
| mandatory | juniSnmpAuthFailGroup |
OID
.1.3.6.1.4.1.4874.2.2.16.2.1.4Obsolete compliance statement for entities which implement the Juniper
SNMP MIB. This statement became obsolete when trap proxy enable/disable
support was added.
SNMP MIB. This statement became obsolete when trap proxy enable/disable
support was added.
Required groups
| mandatory | juniSnmpGeneralGroup | |
| mandatory | juniSnmpAccessGroup | |
| mandatory | juniSnmpTrapGroup | |
| mandatory | juniSnmpAuthFailGroup |
OID
.1.3.6.1.4.1.4874.2.2.16.2.1.5Obsolete compliance statement for entities which implement the Juniper
SNMP MIB. This statement became obsolete when support was added for
ping time window and notification log data inclusion in trap varbinds.
SNMP MIB. This statement became obsolete when support was added for
ping time window and notification log data inclusion in trap varbinds.
Required groups
| mandatory | juniSnmpGeneralGroup2 | |
| mandatory | juniSnmpAccessGroup | |
| mandatory | juniSnmpTrapGroup | |
| mandatory | juniSnmpAuthFailGroup |
OID
.1.3.6.1.4.1.4874.2.2.16.2.1.6The compliance statement for entities which implement the Juniper SNMP
MIB. This statement became obsolete when support was added for access
permission and management application table.
MIB. This statement became obsolete when support was added for access
permission and management application table.
Required groups
| mandatory | juniSnmpGeneralGroup2 | |
| mandatory | juniSnmpAccessGroup | |
| mandatory | juniSnmpTrapGroup2 | |
| mandatory | juniSnmpAuthFailGroup |
OID
.1.3.6.1.4.1.4874.2.2.16.2.1.7The compliance statement for entities which implement the Juniper SNMP
MIB. This statement became obsolete when support was added for trap
severity filter table.
MIB. This statement became obsolete when support was added for trap
severity filter table.
Required groups
| mandatory | juniSnmpGeneralGroup3 | |
| mandatory | juniSnmpAccessGroup | |
| mandatory | juniSnmpTrapGroup2 | |
| mandatory | juniSnmpAuthFailGroup |
OID
.1.3.6.1.4.1.4874.2.2.16.2.1.8The compliance statement for entities which implement the Juniper SNMP
MIB. This statement became obsolete when support was added for table
type based interface compression.
MIB. This statement became obsolete when support was added for table
type based interface compression.
Required groups
| mandatory | juniSnmpGeneralGroup3 | |
| mandatory | juniSnmpAccessGroup | |
| mandatory | juniSnmpTrapGroup3 | |
| mandatory | juniSnmpAuthFailGroup |
OID
.1.3.6.1.4.1.4874.2.2.16.2.1.9The compliance statement for entities which implement the Juniper SNMP
MIB.
MIB.
Required groups
| mandatory | juniSnmpGeneralGroup4 | |
| mandatory | juniSnmpAccessGroup | |
| mandatory | juniSnmpTrapGroup3 | |
| mandatory | juniSnmpAuthFailGroup |