Juniper-SLEP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
9

juniSlepIfTable

table
.1.3.6.1.4.1.4874.2.2.15.1.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniSlepIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-SLEP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-SLEP-MIB::juniSlepIfTable' 
The parameters for the SLEP service on this interface.
juniSlepIfEntry row .1.3.6.1.4.1.4874.2.2.15.1.1.2.1
The Parameters for a particular SLEP interface.

Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Indexes
Column Syntax OID
juniSlepIfIndex
The ifIndex value of the corresponding ifEntry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.1
juniSlepKeepAliveTimer
The interface keep alive timer for this entry. The time in seconds
that this entity will wait for sending a keep-alive-message to the
remote SLEP entity, and the time in seconds that this entity will wait
for the recep…
secondsInteger32r/w
Constraints:
range: 0-6553
 .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.2
juniSlepIfLowerIfIndex
The ifIndex of an interface over which this SLEP interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.3
juniSlepIfRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.4
juniSlepDownWhenLooped
The down-when-looped control for this entry. This attribute determines
if loop detection is enabled for the interface. If set to disable, loop
detection is disabled for the interface.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.15.1.1.2.1.5

juniSlepIfStatisticsTable

table
.1.3.6.1.4.1.4874.2.2.15.1.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniSlepIfStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-SLEP-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-SLEP-MIB::juniSlepIfStatisticsTable' 
The statistics for the SLEP service on this interface.
juniSlepIfStatisticsEntry row .1.3.6.1.4.1.4874.2.2.15.1.1.3.1
The statistics for a particular SLEP interface.
Indexes
Column Syntax OID
juniSlepIfStatsIndex
The ifIndex value of that identifies this entry.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.15.1.1.3.1.1
juniSlepKeepAliveFailures
The number of link drops due to keep-alive failures.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.15.1.1.3.1.2
juniSlepLinkStatusTooLongPackets
The number of packets that were too long for this SLEP entity.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.15.1.1.3.1.3
juniSlepLinkStatusBadFCSs
The number of FCS's errors for this SLEP entity.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.15.1.1.3.1.4