Juniper-ROUTER-MIB Table View

This table contains entries for routers present in the system.

juniRouterEntry row .1.3.6.1.4.1.4874.2.2.32.1.2.1

Each entry in this table represents a single router. Creating and/or
deleting entries in this table causes corresponding entries to be
created or deleted in the juniRouterProtocolTable. Note that VRFs also
appear as e…

Indexes

juniRouterIndex

Column	Syntax	OID
juniRouterIndex The routerIndex of this router. When creating entries in this table, suitable values for this object are determined by reading juniRouterNextRouterIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.32.1.2.1.1
juniRouterName The administratively assigned name given to this router. The name must be unique within the context of this table and cannot be changed after the router instance is created.	Juniper-TCJuniNamer/w Type Constraints: range: 0..256	.1.3.6.1.4.1.4874.2.2.32.1.2.1.2
juniRouterRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.32.1.2.1.3
juniRouterVrf Identifies whether this router is a VRF or not. A value of true(1) indicates that this is a VRF; a value of false(2) indicates that it is not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.32.1.2.1.4
juniRouterContextName An internally derived/assigned name given to this router with a specific format: routerN where N is a decimal number (with no leading zeroes) in the range 1..16777215 corresponding to the value of…	OctetString Constraints: range: 7-14	.1.3.6.1.4.1.4874.2.2.32.1.2.1.5
juniRouterContextEngineID The virtual router SNMP engine's administratively-unique identifier. This is used as the contextEngineId to reach the virtual router's SNMP context via the system-wide SNMP engine using SNMPv3.	SNMP-FRAMEWORK-MIBSnmpEngineID Type Constraints: range: 5..32	.1.3.6.1.4.1.4874.2.2.32.1.2.1.6
juniRouterSummaryVRFCount The number of VRFs contained in the VR.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.32.1.2.1.7

This table contains entries for each protocol supported by the router
entry created in the juniRouterTable.

juniRouterProtocolEntry row .1.3.6.1.4.1.4874.2.2.32.1.3.1

Each entry provides administrative control on a router protocol for the
router designated by the first indice to this table. The second indice
identifies the router protocol.

Entries in this table are crea…

Indexes

juniRouterProtocolRouterIndex juniRouterProtocolProtocolIndex

Column	Syntax	OID
juniRouterProtocolRouterIndex The routerIndex of this router. This object is the same as the juniRouterIndex object defined in the juniRouterTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.32.1.3.1.1
juniRouterProtocolProtocolIndex Identities the router protocol.	JuniRouterProtocolIndex Type Values: 1 ip 2 osi 3 icmp 4 igmp 5 tcp 6 udp 7 bgp 8 ospf 9 isis 10 rip 11 snmp 12 ntp 13 generator 14 localAddressServer 15 dhcpProxy 16 dhcpRelay 17 nameResolver 18 policyManager 19 sscClient 20 cops 21 mgtm 22 dvmrp 23 pim 24 msdp 25 mpls 26 radius 27 mplsMgr 28 dhcpLocalServer 29 tacacsPlus 30 radiusDisconnect 31 dhcpv6LocalServer 32 radiusProxy	.1.3.6.1.4.1.4874.2.2.32.1.3.1.2
juniRouterProtocolRowStatus Administrative control and status of a protocol on a router. The following values can be read from this object: active(1) - Indicates that the protocol on the designated router is crea…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.32.1.3.1.3

This table contains entries for each VRF on each router entry created
in the juniRouterTable.

juniRouterVrfEntry row .1.3.6.1.4.1.4874.2.2.32.1.4.1

Each entry provides administrative control on a router VRF for the
router designated by the first indice of this table. The second indice
identifies the router VRF.

The parent router must exist in the juni…

Indexes

juniRouterVrfRouterIndex juniRouterVrfRouterVrfIndex

Column	Syntax	OID
juniRouterVrfRouterIndex The router index of this router, also referred to as the parent of the VRF. This object is the same as the juniRouterIndex object defined in the juniRouterTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.32.1.4.1.1
juniRouterVrfRouterVrfIndex The VRF router index for this entry, also referred as the child of the parent router, which is identified by the first indice to this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.32.1.4.1.2
juniRouterVrfIpv4UnicastImportRouteMap The VRF router import route map for IPv4 unicast routes.	Juniper-IP-POLICY-MIBJuniIpPolicyNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.32.1.4.1.3
juniRouterVrfIpv4UnicastExportRouteMap The VRF router export route map for IPv4 unicast routes.	Juniper-IP-POLICY-MIBJuniIpPolicyNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.32.1.4.1.4
juniRouterVrfRouteDistinguisher The VRF router route distinguisher.	Juniper-IP-POLICY-MIBJuniIpPolicyExtendedCommunityr/w Type Constraints: range: 0..22	.1.3.6.1.4.1.4874.2.2.32.1.4.1.5
juniRouterVrfRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED CONFIGURATION L…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.32.1.4.1.7
juniRouterVrfRouterName The administratively assigned name given to this VRF router. The name must be unique within the context of this table and cannot be changed after the router instance is created.	Juniper-TCJuniNamer/w Type Constraints: range: 0..256	.1.3.6.1.4.1.4874.2.2.32.1.4.1.8
juniRouterVrfRouterDescription The administratively assigned description given to this VRF router.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.4874.2.2.32.1.4.1.9
juniRouterVrfIpv4UnicastGlobalExportRouteMap The VRF router global export route map for IPv4 unicast routes.	Juniper-IP-POLICY-MIBJuniIpPolicyNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.32.1.4.1.10
juniRouterVrfIpv4UnicastExportRouteMapFilter Is the VRF export map for IPv4 unicast routes allowed to filter routes?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.32.1.4.1.11
juniRouterVrfIpv6UnicastImportRouteMap The VRF router import route map for IPv6 unicast routes.	Juniper-IP-POLICY-MIBJuniIpPolicyNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.32.1.4.1.12
juniRouterVrfIpv6UnicastExportRouteMap The VRF router export route map for IPv6 unicast routes.	Juniper-IP-POLICY-MIBJuniIpPolicyNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.32.1.4.1.13
juniRouterVrfIpv6UnicastGlobalExportRouteMap The VRF router global export route map for IPv6 unicast routes.	Juniper-IP-POLICY-MIBJuniIpPolicyNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.32.1.4.1.14
juniRouterVrfIpv6UnicastExportRouteMapFilter Is the VRF export map for IPv6 unicast routes allowed to filter routes?	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.32.1.4.1.15
juniRouterVrfIpv4UnicastGlobalImportRouteMap The VRF router global import route map for IPv4 unicast routes.	Juniper-IP-POLICY-MIBJuniIpPolicyNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.32.1.4.1.16
juniRouterVrfIpv4UnicastGlobalImportMaxRoutes The maximum number of IPv4 unicast routes which can be globaly imported.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.32.1.4.1.17
juniRouterVrfIpv6UnicastGlobalImportRouteMap The VRF router global import route map for IPv6 unicast routes.	Juniper-IP-POLICY-MIBJuniIpPolicyNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4874.2.2.32.1.4.1.18
juniRouterVrfIpv6UnicastGlobalImportMaxRoutes The maximum number of IPv6 unicast routes which can be globaly imported.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.32.1.4.1.19

This table contains entries for each route target for the router/VRF
entry created in the juniRouterTable and juniRouterVrfTable.

juniRouterVrfRouteTargetEntry row .1.3.6.1.4.1.4874.2.2.32.1.5.1

Each entry provides administrative control on VRF route targets for the
router/VRF pair designated by the first and second indice of this table.
The third indice identifies the route target.

The parent rout…

Indexes

juniRouterVrfRouteTargetRouterIndex juniRouterVrfRouteTargetRouterVrfIndex juniRouterVrfRouteTargetAddrFormat juniRouterVrfRouteTargetRouteTarget

Column	Syntax	OID
juniRouterVrfRouteTargetRouterIndex The routerIndex of this router, also referred to as the parent of the VRF. This object is the same as the juniRouterIndex object defined in the juniRouterTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.32.1.5.1.1
juniRouterVrfRouteTargetRouterVrfIndex The VRF router index for this entry, also referred as the child of the parent router, which is identified by the first indice to this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.32.1.5.1.2
juniRouterVrfRouteTargetAddrFormat The address format of the route target.	Enumeration Enumerated Values: 0 routeTargetFormatAsn 1 routeTargetFormateIp	.1.3.6.1.4.1.4874.2.2.32.1.5.1.3
juniRouterVrfRouteTargetRouteTarget The VRF router route target.	Juniper-IP-POLICY-MIBJuniIpPolicyExtendedCommunity Type Constraints: range: 0..22	.1.3.6.1.4.1.4874.2.2.32.1.5.1.4
juniRouterVrfRouteTargetType The VRF router route target type.	Enumerationr/w Enumerated Values: 0 routeTargetInvalid 1 routeTargetImport 2 routeTargetExport 3 routeTargetBoth	.1.3.6.1.4.1.4874.2.2.32.1.5.1.5
juniRouterVrfRouteTargetRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy *** LIMITED CONFIGURATION L…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.32.1.5.1.6