Juniper-ROUTER-MIB

        The Router MIB is used to manage the creation and deletion as well as
the administrative states of the protocols and functions that run within
a designated router.
    
Source file
Juniper-ROUTER-MIB
Last revised
Identity
juniRouterMIB
Base OID
1.3.6.1.4.1.4874.2.2.32
Imported Objects
Juniper-IP-POLICY-MIB JuniIpPolicyExtendedCommunity JuniIpPolicyName
Juniper-MIBs juniMibs
Juniper-TC JuniName
SNMP-FRAMEWORK-MIB SnmpEngineID
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the junose MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-ROUTER-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-ROUTER-MIB::juniRouterMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-ROUTER-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-ROUTER-MIB::juniRouterMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (54)
.1.3.6.1.4.1.4874.2.2.32
.1.3.6.1.4.1.4874.2.2.32.1
.1.3.6.1.4.1.4874.2.2.32.1.1
.1.3.6.1.4.1.4874.2.2.32.1.2
.1.3.6.1.4.1.4874.2.2.32.1.2.1
.1.3.6.1.4.1.4874.2.2.32.1.2.1.1
.1.3.6.1.4.1.4874.2.2.32.1.2.1.2
.1.3.6.1.4.1.4874.2.2.32.1.2.1.3
.1.3.6.1.4.1.4874.2.2.32.1.2.1.4
OctetString
.1.3.6.1.4.1.4874.2.2.32.1.2.1.5
.1.3.6.1.4.1.4874.2.2.32.1.2.1.6
.1.3.6.1.4.1.4874.2.2.32.1.2.1.7
.1.3.6.1.4.1.4874.2.2.32.1.3
.1.3.6.1.4.1.4874.2.2.32.1.3.1
.1.3.6.1.4.1.4874.2.2.32.1.3.1.1
.1.3.6.1.4.1.4874.2.2.32.1.3.1.2
.1.3.6.1.4.1.4874.2.2.32.1.3.1.3
.1.3.6.1.4.1.4874.2.2.32.1.4
.1.3.6.1.4.1.4874.2.2.32.1.4.1
.1.3.6.1.4.1.4874.2.2.32.1.4.1.1
.1.3.6.1.4.1.4874.2.2.32.1.4.1.10
.1.3.6.1.4.1.4874.2.2.32.1.4.1.11
.1.3.6.1.4.1.4874.2.2.32.1.4.1.12
.1.3.6.1.4.1.4874.2.2.32.1.4.1.13
.1.3.6.1.4.1.4874.2.2.32.1.4.1.14
.1.3.6.1.4.1.4874.2.2.32.1.4.1.15
.1.3.6.1.4.1.4874.2.2.32.1.4.1.16
.1.3.6.1.4.1.4874.2.2.32.1.4.1.17
.1.3.6.1.4.1.4874.2.2.32.1.4.1.18
.1.3.6.1.4.1.4874.2.2.32.1.4.1.19
.1.3.6.1.4.1.4874.2.2.32.1.4.1.2
.1.3.6.1.4.1.4874.2.2.32.1.4.1.3
.1.3.6.1.4.1.4874.2.2.32.1.4.1.4
.1.3.6.1.4.1.4874.2.2.32.1.4.1.5
.1.3.6.1.4.1.4874.2.2.32.1.4.1.7
.1.3.6.1.4.1.4874.2.2.32.1.4.1.8
OctetString
.1.3.6.1.4.1.4874.2.2.32.1.4.1.9
.1.3.6.1.4.1.4874.2.2.32.1.5
.1.3.6.1.4.1.4874.2.2.32.1.5.1
.1.3.6.1.4.1.4874.2.2.32.1.5.1.1
.1.3.6.1.4.1.4874.2.2.32.1.5.1.2
Enumeration
.1.3.6.1.4.1.4874.2.2.32.1.5.1.3
.1.3.6.1.4.1.4874.2.2.32.1.5.1.4
Enumeration
.1.3.6.1.4.1.4874.2.2.32.1.5.1.5
.1.3.6.1.4.1.4874.2.2.32.1.5.1.6
.1.3.6.1.4.1.4874.2.2.32.1.6
.1.3.6.1.4.1.4874.2.2.32.1.6.1
.1.3.6.1.4.1.4874.2.2.32.1.6.1.1
.1.3.6.1.4.1.4874.2.2.32.1.6.1.2
.1.3.6.1.4.1.4874.2.2.32.1.6.1.3
.1.3.6.1.4.1.4874.2.2.32.1.6.1.4
.1.3.6.1.4.1.4874.2.2.32.4
.1.3.6.1.4.1.4874.2.2.32.4.1
.1.3.6.1.4.1.4874.2.2.32.4.2
Dependencies (8) 7 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. Juniper-UNI-SMIjunose
  3. Juniper-MIBsjunose
  4. SNMPv2-CONFrfc
  5. SNMPv2-TCrfc
  6. Juniper-IP-POLICY-MIBjunose
  7. Juniper-TCjunose
  8. SNMP-FRAMEWORK-MIBrfc
  9. Juniper-ROUTER-MIBjunoseselected
Type Definitions (2)
Unsigned32
Enumeration
ip(1)
osi(2)
icmp(3)
igmp(4)
tcp(5)
udp(6)
bgp(7)
ospf(8)
isis(9)
rip(10)
snmp(11)
ntp(12)
generator(13)
localAddressServer(14)
dhcpProxy(15)
dhcpRelay(16)
nameResolver(17)
policyManager(18)
sscClient(19)
cops(20)
mgtm(21)
dvmrp(22)
pim(23)
msdp(24)
mpls(25)
radius(26)
mplsMgr(27)
dhcpLocalServer(28)
tacacsPlus(29)
radiusDisconnect(30)
dhcpv6LocalServer(31)
radiusProxy(32)
Conformance Groups (10)
An obsolete collection of objects providing management of routers and
routing protocols in a Juniper product. This group became obsolete when
support was added for VRFs within routers.
.1.3.6.1.4.1.4874.2.2.32.4.2.1
An obsolete collection of objects providing management of routers and
routing protocols in a Juniper product. This group became obsolete when
support was added for the router context name.
.1.3.6.1.4.1.4874.2.2.32.4.2.2
Obsolete collection of objects providing management of VRFs within
routers in a Juniper product. This group became obsolete when the VRF
router description object was added.
.1.3.6.1.4.1.4874.2.2.32.4.2.3
Obsolete collection of objects providing management of routers and
routing protocols in a Juniper product. This group became obsolete when
the contect engine ID object was added.
.1.3.6.1.4.1.4874.2.2.32.4.2.4
Obsolete collection of objects providing management of VRFs within
routers in a Juniper product. This group became obsolete when the
global export map and the export map filter option were added.
.1.3.6.1.4.1.4874.2.2.32.4.2.5
Obsolete collection of objects providing management of routers and
routing protocols in a Juniper product. This group became obsolete when
the summaryVRfCount object was added.
.1.3.6.1.4.1.4874.2.2.32.4.2.6
Obsolete collection of objects providing management of VRFs within
routers in a Juniper product. This group became obsolete when the
global import map was added and when support for separate ipv4 and
ipv6 route maps was added.
.1.3.6.1.4.1.4874.2.2.32.4.2.7
A collection of objects providing management of routers and routing
protocols in a Juniper product.
.1.3.6.1.4.1.4874.2.2.32.4.2.8
A collection of objects providing summary counts for number of virtual routers
and virtual router forwarding instances (VRFs) in a Juniper product.
.1.3.6.1.4.1.4874.2.2.32.4.2.9
A collection of objects providing management of VRFs within routers in
a Juniper product.
.1.3.6.1.4.1.4874.2.2.32.4.2.10
Compliance Statements (7)

OID .1.3.6.1.4.1.4874.2.2.32.4.1.1
An obsolete compliance statement for entities which implement the
Juniper Router MIB. This statement became obsolete when support was
added for VRFs within routers.
Required groups

OID .1.3.6.1.4.1.4874.2.2.32.4.1.2
An obsolete compliance statement for entities which implement the
Juniper Router MIB. This statement became obsolete when support was
added for the router context name.
Required groups
mandatory juniRouterGroup2
optional juniRouterVrfGroup The VRF group is only required for entities which implement VRF
routers.

OID .1.3.6.1.4.1.4874.2.2.32.4.1.3
Obsolete compliance statement for entities which implement the Juniper
Router MIB. This statement became obsolete when support was added for
the router context engine ID.
Required groups
mandatory juniRouterGroup3
optional juniRouterVrfGroup2 The VRF group is only required for entities which implement VRF
routers.

OID .1.3.6.1.4.1.4874.2.2.32.4.1.4
Obsolete compliance statement for entities which implement the Juniper
Router MIB. This statement became obsolete when the global export map
and the export map filter option were added to the VRF group.
Required groups
mandatory juniRouterGroup4
optional juniRouterVrfGroup2 The VRF group is only required for entities which implement VRF
routers.

OID .1.3.6.1.4.1.4874.2.2.32.4.1.5
Obsolete compliance statement for entities which implement the Juniper
Router MIB.
Required groups
mandatory juniRouterGroup4
optional juniRouterVrfGroup3 The VRF group is only required for entities which implement VRF
routers.

OID .1.3.6.1.4.1.4874.2.2.32.4.1.7
Obsolete compliance statement for entities which implement the Juniper
Router MIB.
Required groups
mandatory juniRouterGroup5
mandatory juniRouterSummaryScalarsGroup
optional juniRouterVrfGroup3 The VRF group is only required for entities which implement VRF
routers.

OID .1.3.6.1.4.1.4874.2.2.32.4.1.8
The compliance statement for entities which implement the Juniper
Router MIB.
Required groups
mandatory juniRouterGroup5
mandatory juniRouterSummaryScalarsGroup
optional juniRouterVrfGroup4 The VRF group is only required for entities which implement VRF
routers.