Juniper-QoS-MIB Table View

This table contains entries for elements of Traffic Class definitions.

juniQosTrafficClassEntry row .1.3.6.1.4.1.4874.2.2.57.1.3.2.1

Each entry describes the characteristics of a traffic class element.

Indexes

juniQosTrafficClassIndex

Column	Syntax	OID
juniQosTrafficClassIndex The number of the traffic class entry which is defined by this row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.3.2.1.1
juniQosTrafficClassRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.3.2.1.2
juniQosTrafficClassName Specifies the name of the traffic class defined by this row.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4874.2.2.57.1.3.2.1.3
juniQosTrafficClassWeight The relative weight for queues in this traffic class.	Unsigned32r/w Constraints: range: 1-63	.1.3.6.1.4.1.4874.2.2.57.1.3.2.1.4
juniQosTrafficClassStrictPriority The traffic to be dequeued before all other classes.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.3.2.1.5
juniQosTrafficClassUpdatePending True if modifications have been made to the traffic class object which have not been committed to the line cards.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.3.2.1.6
juniQosTrafficClassUpdateNow When set to true, modifications made to the traffic class object will be committed to the line cards.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.3.2.1.7
juniQosTrafficClassIsReferencedByGroup When true, the traffic class is referenced by a traffic class group.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.3.2.1.8
juniQosTrafficClassIsReferencedByQosProfile When true, the traffic class is referenced by a QoS profile.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.3.2.1.9

This table contains entries for elements of Traffic Class group
definitions.

juniQosTrafficClassGroupEntry row .1.3.6.1.4.1.4874.2.2.57.1.4.2.1

Each entry describes the characteristics of a traffic class group
element.

Indexes

juniQosTrafficClassGroupIndex

Column	Syntax	OID
juniQosTrafficClassGroupIndex The number of the traffic class entry which is defined by this row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.4.2.1.1
juniQosTrafficClassGroupRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.4.2.1.2
juniQosTrafficClassGroupName Specifies the name of the traffic class group defined by this row.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4874.2.2.57.1.4.2.1.3
juniQosTrafficClassGroupUpdatePending True if modifications have been made to the traffic class group object which have not been committed to the line cards.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.4.2.1.4
juniQosTrafficClassGroupUpdateNow When set to true, modifications made to the traffic class group object will be committed to the line cards.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.4.2.1.5
juniQosTrafficClassGroupIsReferencedByQosProfile When true, the traffic class group is referenced by a QoS profile.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.4.2.1.6
juniQosTrafficClassGroupSlotNumber The number of the slot on which this traffic class group is applied. Traffic class groups may be global or local. Global groups indicate that the traffic class group is to be applied to each line card in the chassis. …	Integer32r/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.4874.2.2.57.1.4.2.1.7
juniQosTrafficClassGroupExtendedGroup When true, the traffic class group is an extended group. False indicates the traffic class group is an auto-strict-priority group.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.4.2.1.8

This table identifies which traffic classes are in each traffic class
group.

juniQosTrafficClassGroupEntryEntry row .1.3.6.1.4.1.4874.2.2.57.1.5.1.1

Each entry ties a traffic class table entry to a traffic class group.

Indexes

juniQosTrafficClassGroupIndex juniQosTrafficClassIndex

Column	Syntax	OID
juniQosTrafficClassGroupEntryRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry object MUST be explicitly configure…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.5.1.1.1

This table contains entries for elements of Scheduler Profile
definitions.

juniQosSchedulerProfileEntry row .1.3.6.1.4.1.4874.2.2.57.1.6.2.1

Each entry describes the characteristics of a scheduler profile
element.

Indexes

juniQosSchedulerProfileIndex

Column	Syntax	OID
juniQosSchedulerProfileIndex The number of the scheduler profile entry which is defined by this row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.1
juniQosSchedulerProfileRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.2
juniQosSchedulerProfileName Specifies the name of the scheduler profile defined by this row.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.3
juniQosSchedulerProfileShapingRate Specifies the shaping rate in bits per second (bps). Values between 1 and 63999 are not supported.	bpsUnsigned32r/w Constraints: range: 0-1000000000	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.4
juniQosSchedulerProfileBurst Specifies the catch-up burst size in bytes. Burst value of 0 indicates the largest burst size the system will allow without losing accuracy.	bytesUnsigned32r/w Constraints: range: 0-522240	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.5
juniQosSchedulerProfileWeight The relative weight of the scheduler. When an assured rate is specified, this object is ignored.	Unsigned32r/w Constraints: range: 0-4080	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.6
juniQosSchedulerProfileStrictPriority Specifies the traffic to be dequeued before all other scheduler nodes.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.7
juniQosSchedulerProfileUpdatePending True if modifications have been made to the scheduler profile object which have not been committed to the line cards.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.8
juniQosSchedulerProfileUpdateNow When set to true, modifications made to the scheduler profile object will be committed to the line cards.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.9
juniQosSchedulerProfileIsReferencedByQosProfile When true, the scheduler profile is referenced by a QoS profile.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.10
juniQosSchedulerProfileAssuredRate Specifies the assured rate in bits per second (bps). When this object has a non-default value, the scheduler weight (juniQosSchedulerProfileWeight) is ignored. A value of '4294967295' configures Hierarch…	bpsUnsigned32r/w Constraints: range: 0-0 range: 25000-1000000000 range: 4294967295-4294967295	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.11
juniQosSchedulerProfileSharedShapingRate Specifies the shared shaping rate in bits per second (bps). The range of 1 to 63999 is not supported.	bpsUnsigned32r/w Constraints: range: 0-1000000000	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.12
juniQosSchedulerProfileSharedShapingBurstSize Specifies the catch-up burst size for a shared shaping, in bytes. A value of zero indicates that the system should choose an appropriate default value.	bytesUnsigned32r/w Constraints: range: 0-522240	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.13
juniQosSchedulerProfileSharedShapingType The value of this object specifies the type of shared shaping that is to be performed when shared shaping is enabled. Shared shaper types are defined as follows: 'simple' indicates that Simple Shared Sh…	Enumerationr/w Enumerated Values: 0 none 1 simple 2 compound 3 auto	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.14
juniQosSchedulerProfileSharedShapingExplicitConstituents This option allows automatic shared shaper constituent selecting and bandwidth allocation to be overridden. By default, constituents are configured implicitly.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.15
juniQosSchedulerProfileSharedShapingPriority The priority of a strict shared shaper constituent. When the value of juniQosSchedulerProfileSharedShaper- ConstituentType is 'strict' the value of this object determines the order in which the strict con…	Integer32r/w Constraints: range: -1-8	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.16
juniQosSchedulerProfileSharedShapingWeight The weight of a weighted shared shaper constituent. When the value of juniQosSchedulerProfileSharedShaper- ConstituentType is 'weighted' the value of this object determines the proportion of the weighted …	Integer32r/w Constraints: range: -1-31	.1.3.6.1.4.1.4874.2.2.57.1.6.2.1.17

This table contains entries for elements of queue profile definitions.

juniQosQueueProfileEntry row .1.3.6.1.4.1.4874.2.2.57.1.7.2.1

Each entry describes the characteristics of a queue profile element.

Indexes

juniQosQueueProfileIndex

Column	Syntax	OID
juniQosQueueProfileIndex The number of the queue profile entry which is defined by this row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.1
juniQosQueueProfileRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.2
juniQosQueueProfileName Specifies the name of the queue profile defined by this row.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.3
juniQosQueueProfileCommittedMinLength Specifies the minimum queue length in bytes for committed traffic.	bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.4
juniQosQueueProfileCommittedMaxLength Specifies the maximum queue length in bytes for committed traffic.	bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.5
juniQosQueueProfileConformedMinLength Specifies the minimum queue length in bytes for conformed traffic.	bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.6
juniQosQueueProfileConformedMaxLength Specifies the maximum queue length in bytes for conformed traffic.	bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.7
juniQosQueueProfileExceededMinLength Specifies the minimum queue length in bytes for exceeded traffic.	bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.8
juniQosQueueProfileExceededMaxLength Specifies the maximum queue length in bytes for exceeded traffic.	bytesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.9
juniQosQueueProfileConformedFraction Specifies the maximum percentage of queue occupied by conformed traffic.	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.10
juniQosQueueProfileExceededFraction Specifies the maximum percentage of queue occupied by exceeded traffic.	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.11
juniQosQueueProfileCommittedDropThreshold Specifies the drop threshold (percent of queue) for committed traffic.	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.12
juniQosQueueProfileCommittedDropRate Specifies the drop rate (percent of traffic) for committed traffic.	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.13
juniQosQueueProfileConformedDropThreshold Specifies the drop threshold (percent of queue) for comformed traffic.	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.14
juniQosQueueProfileConformedDropRate Specifies the drop rate (percent of traffic) for comformed traffic.	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.15
juniQosQueueProfileExceededDropThreshold Specifies the drop threshold (percent of queue) for exceeded traffic.	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.16
juniQosQueueProfileExceededDropRate Specifies the drop rate (percent of traffic) for exceeded traffic.	percentUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.17
juniQosQueueProfileBufferWeight The relative weight for queues in this traffic class.	Unsigned32r/w Constraints: range: 1-63	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.18
juniQosQueueProfileUpdatePending True if modifications have been made to the queue profile object which have not been committed to the line cards.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.19
juniQosQueueProfileUpdateNow When set to true, modifications made to the queue profile object will be committed to the line cards.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.20
juniQosQueueProfileIsReferencedByQosProfile When true, the queue profile is referenced by a QoS profile.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.7.2.1.21

This table contains entries for elements of QoS Profile definitions.

juniQosProfileEntry row .1.3.6.1.4.1.4874.2.2.57.1.8.2.1

Each entry describes the characteristics of a QoS profile element.

Indexes

juniQosProfileIndex

Column	Syntax	OID
juniQosProfileIndex The number identifies this QoS profile.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.8.2.1.1
juniQosProfileRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create a QoS profile in this table, the following entry objects MUST be explicitly con…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.8.2.1.2
juniQosProfileName Specifies the name of the QoS profile defined by this row.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4874.2.2.57.1.8.2.1.3
juniQosProfileUpdatePending True if modifications have been made to the QoS profile object which have not been committed to the line cards.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.8.2.1.4
juniQosProfileUpdateNow When set to true, modifications made to the QoS profile object will be committed to the line cards.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.8.2.1.5
juniQosProfileIsReferencedByInterfaceQosAttachment When true, the QoS profile is referenced by an interface QoS attachment.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.8.2.1.6
juniQosProfileIsReferencedByQosPortTypeProfile When true, the QoS profile is referenced by a QoS port type profile.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.8.2.1.7

This table contains entries for elements of QoS profile definitions.

juniQosProfileElementEntry row .1.3.6.1.4.1.4874.2.2.57.1.9.1.1

Each entry describes the characteristics of a QoS profile element.

Indexes

juniQosProfileIndex juniQosInterfaceType juniQosProfileEntryType juniQosTrafficClassIndex juniQosTrafficClassGroupIndex

Column	Syntax	OID
juniQosProfileElementEntryRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry object MUST be explicitly configure…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.9.1.1.1
juniQosProfileElementEntryQueueProfile Specifies the queue profile assigned to the QoS entry.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.9.1.1.2
juniQosProfileElementEntrySchedulerProfile Specifies the scheduler profile assigned to the QoS entry.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.9.1.1.3
juniQosInterfaceType The QoS interface type ID, part of the index for juniQosProfileElementTable. Please note that if the juniQpsProfileEntryType is trafficClassGroup, then only ethernet, atm, serial, and serverPort are valid…	Enumeration Enumerated Values: 0 ip 6 ethernet 9 atm 11 atmVc 13 serial 16 frVc 21 l2tpSession 31 serverPort 35 vlan 36 cbf 50 ipv6 150 l2tpTunnel 151 ipTunnel 163 atmVp 174 svlan	.1.3.6.1.4.1.4874.2.2.57.1.9.1.1.4
juniQosProfileEntryType The QoS profile type, part of the index for juniQosProfileElementTable.	Enumeration Enumerated Values: 1 trafficClass 2 schedulerProfile 3 trafficClassGroup 4 shadowNode	.1.3.6.1.4.1.4874.2.2.57.1.9.1.1.5
juniQosProfileElementEntryDropProfile Specifies the drop profile assigned to the QoS entry.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.9.1.1.6
juniQosProfileElementEntryStatisticsProfile Specifies the statistics profile assigned to the QoS entry.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.9.1.1.7

This table contains entries which represent attachment of QoS to
interfaces.

juniQosIfAttachEntry row .1.3.6.1.4.1.4874.2.2.57.1.10.1.1

Each entry contains the attachment of QoS to an interface.

Indexes

juniQosIfAttachIndex

Column	Syntax	OID
juniQosIfAttachIndex The interface number representing the interface to which QoS has been attached.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.10.1.1.1
juniQosIfAttachRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy juniQosIfAttachQosProfileIn…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.10.1.1.2
juniQosIfAttachQosProfileIndex The QoS profile attached to this interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.10.1.1.3

This table contains entries which represent attachment of QoS to
interface types with which they are associated.

juniQosQosPortTypeProfileEntry row .1.3.6.1.4.1.4874.2.2.57.1.11.1.1

Each entry contains the attachment of QoS to an interface.

Indexes

juniQosQosPortTypeProfileIndex

Column	Syntax	OID
juniQosQosPortTypeProfileIndex The interface number representing the types of interface to which QoS has been attached.	Enumeration Enumerated Values: 6 ethernet 9 atm 13 serial 31 serverPort 54 lag	.1.3.6.1.4.1.4874.2.2.57.1.11.1.1.1
juniQosQosPortTypeProfileRowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy juniQosQosPortTypeProfileQo…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.11.1.1.2
juniQosQosPortTypeProfileQosProfileIndex The QoS profile assigned to this port type.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.11.1.1.3

Each entry within this table contains queue statistics for an
interface/traffic class combination.

juniQosQueueStatisticsEntry row .1.3.6.1.4.1.4874.2.2.57.1.12.1.1

Each entry defines a single queue statistics entry.

Indexes

IF-MIBifIndex juniQosTrafficClassIndex

Column	Syntax	OID
juniQosOutPacketForwarded The number of packets queued on this interface.	packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.57.1.12.1.1.1
juniQosOutBytesForwarded The number of bytes queued on this interface.	bytesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.57.1.12.1.1.2
juniQosOutGreenPacketsSchedulerDrops The number of green packets dropped on this interface.	packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.57.1.12.1.1.3
juniQosOutYellowPacketsSchedulerDrops The number of yellow packets dropped on this interface.	packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.57.1.12.1.1.4
juniQosOutRedPacketsSchedulerDrops The number of red packets dropped on this interface.	packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.57.1.12.1.1.5
juniQosOutGreenBytesSchedulerDrops The number of green bytes dropped on this interface.	bytesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.57.1.12.1.1.6
juniQosOutYellowBytesSchedulerDrops The number of yellow bytes dropped on this interface.	bytesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.57.1.12.1.1.7
juniQosOutRedBytesSchedulerDrops The number of red bytes dropped on this interface.	bytesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4874.2.2.57.1.12.1.1.8

This table contains entries for elements of drop profile definitions.

juniQosDropProfileEntry row .1.3.6.1.4.1.4874.2.2.57.1.13.2.1

Each entry describes the characteristics of a drop profile element.

Indexes

juniQosDropProfileIndex

Column	Syntax	OID
juniQosDropProfileIndex The number of the drop profile entry which is defined by this row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.1
juniQosDropProfileRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.2
juniQosDropProfileName Specifies the name of the drop profile defined by this row.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.3
juniQosDropProfileAverageLengthExponent Specifies the exponent used to weight the average queue length over time, controlling RED responsiveness. A non-default value enables the average queue length calculation.	Unsigned32r/w Constraints: range: 0-20	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.4
juniQosDropProfileCommittedThresholdUnits Specifies the units for the committed minimum and maximum thresholds.	Enumerationr/w Enumerated Values: 1 bytes 2 percent	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.5
juniQosDropProfileCommittedThresholdMinThreshold Specifies the minimum drop threshold for committed traffic. The units are defined by juniQosDropProfileCommittedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If uni…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.6
juniQosDropProfileCommittedThresholdMaxThreshold Specifies the maximum drop threshold for committed traffic. The units are defined by juniQosDropProfileCommittedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If uni…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.7
juniQosDropProfileCommittedThresholdMaxDropProbability Specifies the maximum drop probability for committed traffic.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.8
juniQosDropProfileConformedThresholdUnits Specifies the units for the conformed minimum and maximum thresholds.	Enumerationr/w Enumerated Values: 1 bytes 2 percent	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.9
juniQosDropProfileConformedThresholdMinThreshold Specifies the minimum drop threshold for conformed traffic. The units are defined by juniQosDropProfileConformedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If uni…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.10
juniQosDropProfileConformedThresholdMaxThreshold Specifies the maximum drop threshold for conformed traffic. The units are defined by juniQosDropProfileConformedThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If uni…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.11
juniQosDropProfileConformedThresholdMaxDropProbability Specifies the maximum drop probability for conformed traffic.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.12
juniQosDropProfileExceededThresholdUnits Specifies the units for the exceeded minimum and maximum thresholds.	Enumerationr/w Enumerated Values: 1 bytes 2 percent	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.13
juniQosDropProfileExceededThresholdMinThreshold Specifies the minimum drop threshold for exceeded traffic. The units are defined by juniQosDropProfileExceededThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.14
juniQosDropProfileExceededThresholdMaxThreshold Specifies the maximum drop threshold for exceeded traffic. The units are defined by juniQosDropProfileExceededThresholdUnits. If units are bytes, the value must be in the range of 0..1073741824. If units…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.15
juniQosDropProfileExceededThresholdMaxDropProbability Specifies the maximum drop probability for exceeded traffic.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.16
juniQosDropProfileUpdatePending True if modifications have been made to the drop profile object which have not been committed to the line cards.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.17
juniQosDropProfileUpdateNow When set to true, modifications made to the drop profile object will be committed to the line cards.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.18
juniQosDropProfileIsReferencedByQosProfile True if the drop profile is referenced by QoS profile(s).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.13.2.1.19

This table contains entries for elements of Statistics Profile
definitions.

juniQosStatisticsProfileEntry row .1.3.6.1.4.1.4874.2.2.57.1.15.2.1

Each entry describes the characteristics of a statstics profile
element.

Indexes

juniQosStatisticsProfileIndex

Column	Syntax	OID
juniQosStatisticsProfileIndex The number of the statistics profile entry which is defined by this row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.1
juniQosStatisticsProfileRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.2
juniQosStatisticsProfileName Specifies the name of the statistics profile defined by this row.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.3
juniQosStatisticsProfileForwardingRateThreshold Specifies the forwarding rate threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.4
juniQosStatisticsProfileCommittedDropThreshold Specifies the committed drop threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.5
juniQosStatisticsProfileConformedDropThreshold Specifies the conformed drop threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.6
juniQosStatisticsProfileExceededDropThreshold Specifies the exceeded drop threshold.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.7
juniQosStatisticsProfileRatePeriod Specifies the rate period over which forwarding and drop thresholds are calculated	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.8
juniQosStatisticsProfileUpdatePending True if modifications have been made to the statistics profile object which have not been committed to the line cards.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.9
juniQosStatisticsProfileUpdateNow When set to true, modifications made to the statistics profile object will be committed to the line cards.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.10
juniQosStatisticsProfileIsReferencedByQosProfile True if the statistics profile is referenced by QoS profile(s).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.57.1.15.2.1.11

This table contains entries for elements of QoS mode port definitions.

juniQosQosModePortEntry row .1.3.6.1.4.1.4874.2.2.57.1.16.1.1

Each entry describes the characteristics of a QoS mode port element.

Indexes

juniQosQosModePortIndex

Column	Syntax	OID
juniQosQosModePortIndex The ATM port interface for which this row defines QoS mode port settings.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.16.1.1.1
juniQosQosModePortRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.16.1.1.2
juniQosQosModePortFrameMode Specifies the frame mode for this ATM port interface. lowCdv mode can not be configured unless juniQosQosShapingModeShapingMode for the ATM port interface is configured as 'cell'.	Enumerationr/w Enumerated Values: 0 lowCdv 1 lowLatency	.1.3.6.1.4.1.4874.2.2.57.1.16.1.1.3

This table contains entries for elements of QoS shaping mode
definitions.

juniQosQosShapingModeEntry row .1.3.6.1.4.1.4874.2.2.57.1.17.1.1

Each entry describes the characteristics of a QoS shaping mode
element.

Indexes

juniQosQosShapingModeIndex

Column	Syntax	OID
juniQosQosShapingModeIndex The ATM port interface for which this row defines QoS shaping mode port settings.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.17.1.1.1
juniQosQosShapingModeRowStatus Controls creation/deletion of conceptual rows within this table. All rowStatus modes are supported. To create an entry in this table, the following entry objects MUST be explicitly configur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.57.1.17.1.1.2
juniQosQosShapingModeShapingMode Specifies the QoS shaping mode for this ATM port interface. 'frame' indicates shaping is to be based on frames, not including cell encapsulation and padding. 'cell' indicates shaping is to be based on cells, with cell…	Enumerationr/w Enumerated Values: 0 frame 1 cell	.1.3.6.1.4.1.4874.2.2.57.1.17.1.1.3

This table contains an entry for each possible stacked vlan UID.

juniQosSVlanUidTableEntry row .1.3.6.1.4.1.4874.2.2.57.1.18.1.1

Each entry is a stacked vlan UID.

Indexes

juniQosSVlanUidTablePortUid juniQosSVlanUidTableSVlanId

Column	Syntax	OID
juniQosSVlanUidTablePortUid The UID of the Ethernet port on which the stacked vlan is defined	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.18.1.1.1
juniQosSVlanUidTableSVlanId The stacked vlan ID	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.4874.2.2.57.1.18.1.1.2
juniQosSVlanUidTableSVlanUid The stacked vlan UID	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.18.1.1.3

This table contains an entry for each possible Ethernet port/stacked vlan id.

juniQosSVlanIdTableEntry row .1.3.6.1.4.1.4874.2.2.57.1.19.1.1

Each entry is a stacked vlan Ethernet port/stacked vlan ID.

Indexes

juniQosSVlanIdTableSVlanUid

Column	Syntax	OID
juniQosSVlanIdTableSVlanUid The stacked vlan UID	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.19.1.1.1
juniQosSVlanIdTablePortUid The UID of the Ethernet port on which the stacked vlan is defined	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.57.1.19.1.1.2
juniQosSVlanIdTableSVlanId The stacked vlan ID	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.4874.2.2.57.1.19.1.1.3