Juniper-PPP-PROFILE-MIB Table View

This table contains profiles for configuring PPP interfaces.
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.

juniPppProfileEntry row .1.3.6.1.4.1.4874.2.2.45.1.1.1.1

A profile describing configuration of a PPP interface.

Indexes

juniPppProfileId

Column	Syntax	OID
juniPppProfileId The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the Juniper-PROFILE-MIB.juniProfileNameTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.1
juniPppProfileSetMap A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excl…	Juniper-TCJuniSetMapr/w Type Constraints: range: 0..8	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.2
juniPppProfileLcpMagicNumber If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In any event, the local node will comply with any magic number …	Enumerationr/w Enumerated Values: 1 false 2 true	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3
juniPppProfileLcpKeepalive Keepalive interval in seconds. A value of zero disables keepalive. Keepalive is performed using LCP Echo.	secondsInteger32r/w Constraints: range: 0-0 range: 30-64800	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4
juniPppProfileLcpAuthenticationdeprecated Specifies the type(s) of authentication, if any, to be negotiated with the peer: none No authentication is negotiated. pap PAP negotiation only. chap CHAP negotiation only. papChap PAP negotiat…	Juniper-PPP-MIBJuniPppAuthenticationr/w Type Values: 0 none 1 pap 2 chap 3 papChap 4 chapPap Description: Specifies the type(s) of PPP authentication used, if any: none No authentication is negotiated. pap PAP negotiation only. chap CHAP negotiation only. papChap PAP negotiation is attempted first; if fail…	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.5
juniPppProfileIpPeerDnsPriority When enabled, allows peer's DNS address to prevail in the event of a negotiation conflict; when disabled, the local PPP interface's DNS address prevails.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.6
juniPppProfileIpPeerWinsPriority When enabled, allows peer's WINS address to prevail in the event of a negotiation conflict; when disabled, the local PPP interface's WINS address prevails.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.7
juniPppProfileLcpInitialMRU The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 1 then the local PPP entity will advertise an MRU value determined by…	Integer32r/w Constraints: range: 1-1 range: 64-65535	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8
juniPppProfilePacketLog When enabled, allows packet logging on dynamic PPP interfaces.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.9
juniPppProfileStateLog When enabled, allows state machine logging on dynamic PPP interfaces.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.10
juniPppProfileChapMinChallengeLength Minimum value of the CHAP authenticator challenge length value. This value is never allowed to be set to a value greater than juniPppProfileChapMaxChallengeLength.	Integer32r/w Constraints: range: 8-63	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.11
juniPppProfileChapMaxChallengeLength Maximum value of the CHAP authenticator challenge length value. This value is never allowed to be set to a value less than juniPppLinkConfigChapMinChallengeLength.	Integer32r/w Constraints: range: 8-63	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.12
juniPppProfilePassiveMode When enabled, LCP state machine is forced into passive mode on lower layer UP message. It adds compatibility with slow and buggy clients.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13
juniPppProfileMlppp Enables the creation of dynamic multi-link PPP interfaces.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.14
juniPppProfileIpcpNetmask Enables the negotiation of the IPCP option netmask (0x90) during IPCP negotiation.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.15
juniPppProfileAuthenticatorVirtualRouter The name of the virtual router (Juniper-ROUTER-MIB.juniRouterName) to be used for authentication on the PPP interface. Setting this object statically binds the authenticating virtual router with the PPP interface. If …	Juniper-TCJuniNamer/w Type Constraints: range: 0..256	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.16
juniPppProfileAaaProfile The name of the AAA profile to be used for authentication on the PPP interface. Setting this object statically binds the aaa profile with the PPP interface. If this object is not explicitly set or it is set to null st…	Juniper-TCJuniNamer/w Type Constraints: range: 0..256	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.17
juniPppProfileInitiateIp If enabled, PPP interface will initiate negotiation of IPCP; if disabled, PPP interface will rely on remote PPP client to initiate negotiation of IPCP.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.18
juniPppProfileInitiateIpv6 If enabled, PPP interface will initiate negotiation of IPv6CP; if disabled, PPP interface will rely on remote PPP client to initiate negotiation of IPv6CP.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.19
juniPppProfileFragmentation Enables MLPPP fragmentation.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.20
juniPppProfileReassembly Enables MLPPP reassembly.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.21
juniPppProfileMaxReceiveReconstructedUnit The Maximum Received Reconstructed Unit (MRRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 1, then the MRRU is set to the local MRU value.	Integer32r/w Constraints: range: 1-1 range: 64-65535	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.22
juniPppProfileFragmentSize The size of fragments transmitted by the local PPP entity. If the value of this variable is 1, then the fragment size is set to the link's MTU value.	Integer32r/w Constraints: range: 1-1 range: 128-65535	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.23
juniPppProfileHashLinkSelection Enables MLPPP hash-based link selection for non-best-effort data.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.24
juniPppProfileLcpAuthentication2 A configuration variable comprised of nibbles i.e. 4 bits, such that a client can supply a list of 0 to 8 selections. The least significant nibble is the first value of the list, and the most significant nibble is t…	Juniper-TCJuniNibbleConfigr/w	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.25
juniPppProfileIgnoreMagicNumberMismatch The ignore magic number mismatch option of the PPP interface determines the action to be taken, when the peer has not negotiated any value yet sent null or invalid magic number in the LCP echo packets. The two actions…	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.26
juniPppProfileIpcpPromptDnsOption Control prompting of IPCP options to remote peer.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.27
juniPppProfileIpcpLockout The lockout option for IPCP determines whether IPCP can be negotiated when the interface is already running IPV6CP. On enabling this option, the negotiation will be blocked after the IPV6CP service is up and waited for …	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.28
juniPppProfileMultilinkMulticlass Enables Multiclass Multilink PPP (MCML). Changing this object has an effect when the link is next restarted.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.29
juniPppProfileMultilinkMaxMultiClasses Maximum number of MCML classes to be negotiated. Changing this object has an effect when the link is next restarted.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.30

This table contains entries for MLPPP Multiclass to traffic class
mapping of the profile present in the system.

juniPppProfileMulticlassTrafficClassEntry row .1.3.6.1.4.1.4874.2.2.45.1.1.2.1

Each entry describes the MLPPP multiclass to traffic class mapping of
profiles.Other characteristics like fragmentation and reassembly
for a particular traffic class can be configured.

Indexes

juniPppProfileId juniPppProfileMulticlassIndex

Column	Syntax	OID
juniPppProfileMulticlassId The index of the profile. When creating entries in this table, suitable values for this object are determined by reading juniPppProfileId.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.1
juniPppProfileMulticlassIndex The multiclass index of a particular traffic class type. This can be configured only when MCMP is enabled in the profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.2
juniPppProfileMulticlassTcName The traffic class index mapped to the MCMP multiclass index. This can be configured only when MCMP is enabled in the profile.	JuniPppProfileMulticlassTcNamer/w Type Constraints: range: 0..64	.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.3
juniPppProfileMulticlassFragmentation Enable or disable fragmentation for a particular multiclass. This can be configured only when MCMP is enaled in the profile.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.4
juniPppProfileMulticlassReassembly Enable or disable rassembly for a particular multiclass. This can be configured only when MCMP is enaled in the profile.	Juniper-TCJuniEnabler/w Type Values: 0 disable 1 enable	.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.5