Juniper-PPP-PROFILE-MIB

        The Point-to-Point Protocol (PPP) Profile MIB for the Juniper Netowrks
enterprise.  This MIB provides configuration parameters that extend the
tables found in the Juniper-PROFILE-MIB to support profiles for PPP
interfaces.
    
Source file
Juniper-PPP-PROFILE-MIB
Last revised
Identity
juniPppProfileMIB
Base OID
1.3.6.1.4.1.4874.2.2.45
Imported Objects
Juniper-MIBs juniMibs
Juniper-PPP-MIB JuniPppAuthentication
Juniper-TC JuniEnable JuniName JuniNibbleConfig JuniSetMap
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
Net-SNMP examples using the junose MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-PPP-PROFILE-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-PPP-PROFILE-MIB::juniPppProfileMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PPP-PROFILE-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PPP-PROFILE-MIB::juniPppProfileMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (45)
.1.3.6.1.4.1.4874.2.2.45
.1.3.6.1.4.1.4874.2.2.45.1
.1.3.6.1.4.1.4874.2.2.45.1.1
.1.3.6.1.4.1.4874.2.2.45.1.1.1
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.1
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.10
Integer32
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.11
Integer32
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.12
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.13
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.14
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.15
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.16
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.17
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.18
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.19
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.2
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.20
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.21
Integer32
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.22
Integer32
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.23
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.24
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.25
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.26
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.27
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.28
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.29
Enumeration
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.3
Integer32
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.30
secondsInteger32
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.4
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.5
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.6
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.7
Integer32
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.8
.1.3.6.1.4.1.4874.2.2.45.1.1.1.1.9
.1.3.6.1.4.1.4874.2.2.45.1.1.2
.1.3.6.1.4.1.4874.2.2.45.1.1.2.1
.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.1
.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.2
.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.3
.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.4
.1.3.6.1.4.1.4874.2.2.45.1.1.2.1.5
.1.3.6.1.4.1.4874.2.2.45.4
.1.3.6.1.4.1.4874.2.2.45.4.1
.1.3.6.1.4.1.4874.2.2.45.4.2
Dependencies (11) 5 direct · 6 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
OctetString range: 0..64
Conformance Groups (13)
Obsolete collection of objects providing management of profile
functionality for PPP interfaces in a Juniper product. This group
became obsolete when support was added for MLPPP.
.1.3.6.1.4.1.4874.2.2.45.4.2.1
Obsolete collection of objects providing management of profile
functionality for PPP interfaces in a Juniper product. This group
became obsolete when support was added for negotiation of IPCP option
netmask.
.1.3.6.1.4.1.4874.2.2.45.4.2.2
Obsolete collection of objects providing management of profile
functionality for PPP interfaces in a Juniper product. This group
became obsolete when the juniPppProfileAuthenticatorVirtualRouter object
was added.
.1.3.6.1.4.1.4874.2.2.45.4.2.3
Obsolete collection of objects providing management of profile
functionality for PPP interfaces in a Juniper product. This group
became obsolete when the juniPppProfileAaaProfile object was added.
.1.3.6.1.4.1.4874.2.2.45.4.2.4
Obsolete collection of objects providing management of profile
functionality for PPP interfaces in a Juniper product. This group
became obsolete when the juniPppProfileInitiateIp and
juniPppProfileInitiateIpv6 objects were added.
.1.3.6.1.4.1.4874.2.2.45.4.2.5
Obsolete collection of objects providing management of profile
functionality for PPP interfaces in a Juniper product. This group
became obsolete when support was added for fragmentation and
reassembly.
.1.3.6.1.4.1.4874.2.2.45.4.2.6
Obsolete collection of objects providing management of profile
functionality for PPP interfaces in a Juniper product. This group
became obsolete when support was added for mlppp hash-based link
selection.
.1.3.6.1.4.1.4874.2.2.45.4.2.7
Obsolete collection of objects providing management of profile
functionality for PPP interfaces in a Juniper product. This group
became obsolete when juniPppProfileLcpAuthentication2 was added.
.1.3.6.1.4.1.4874.2.2.45.4.2.8
Obsolete collection of objects providing management of profile functionality
for PPP interfaces in a Juniper product. This group became obsolete when
juniPppProfileIgnoreMagicNumberMismatch was added
.1.3.6.1.4.1.4874.2.2.45.4.2.9
A collection of objects providing management of profile functionality for
PPP interfaces in a Juniper product. This group became obsolete when
juniPppProfileIpcpDnsOption and juniPppProfileIpcpLockout was added
.1.3.6.1.4.1.4874.2.2.45.4.2.10
Obsolete collection of objects providing management of profile functionality
for PPP interfaces in a Juniper product. This was obsoleted when the
support for multiclass MLPPP was added.
.1.3.6.1.4.1.4874.2.2.45.4.2.11
A collection of objects providing management of profile functionality
for PPP interfaces in a Juniper product.
.1.3.6.1.4.1.4874.2.2.45.4.2.12
A collection of object providing management of multiclass MLPPP
multiclass to traffic class mapping functionality in the PPP profile
in a Juniper product.
.1.3.6.1.4.1.4874.2.2.45.4.2.13
Compliance Statements (10)

OID .1.3.6.1.4.1.4874.2.2.45.4.1.1
Obsolete compliance statement for entities which implement the Juniper
PPP Profile MIB. This statement became obsolete when support was added
for multi-link PPP interfaces.
Required groups

OID .1.3.6.1.4.1.4874.2.2.45.4.1.2
Obsolete compliance statement for entities which implement the Juniper
PPP Profile MIB. This statement became obsolete when support was added
for negotiation of IPCP option netmask.
Required groups

OID .1.3.6.1.4.1.4874.2.2.45.4.1.3
Obsolete compliance statement for entities which implement the Juniper
PPP Profile MIB. This statement became obsolete when the
juniPppProfileAuthenticatorVirtualRouter object was added.
Required groups

OID .1.3.6.1.4.1.4874.2.2.45.4.1.4
Obsolete compliance statement for entities which implement the Juniper
PPP Profile MIB. This statement became obsolete when the
juniPppProfileAaaProfile object was added.
Required groups

OID .1.3.6.1.4.1.4874.2.2.45.4.1.5
Obsolete compliance statement for entities which implement the Juniper
PPP Profile MIB. This statement became obsolete when the
juniPppProfileInitiateIp and juniPppProfileInitiateIpv6 objects were
added.
Required groups

OID .1.3.6.1.4.1.4874.2.2.45.4.1.6
Obsolete compliance statement for entities which implement the Juniper
PPP Profile MIB. This statement became obsolete when fragmentation and
reassembly support was added.
Required groups

OID .1.3.6.1.4.1.4874.2.2.45.4.1.7
The compliance statement for entities which implement the Juniper PPP
Profile MIB. This statement became obsolete when object
juniPppProfileHashLinkSelection was added.
Required groups

OID .1.3.6.1.4.1.4874.2.2.45.4.1.8
The compliance statement for entities which implement the Juniper PPP
Profile MIB. This statement became obsolete when object
juniPppProfileLcpAuthentication2 was added.
Required groups

OID .1.3.6.1.4.1.4874.2.2.45.4.1.9
The compliance statement for entities which implement the Juniper PPP
Profile MIB. This statement became obsolete when object
juniPppProfileIpcpDnsOption and juniPppProfileIpcpLockout was added.
Required groups

OID .1.3.6.1.4.1.4874.2.2.45.4.1.10
The compliance statement for entities which implement the Juniper PPP
Profile MIB.
Required groups