Juniper-IPV6-PROFILE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
21
.1.3.6.1.4.1.4874.2.2.68.1.1.1 · 1 row entry · 21 columns
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIpv6ProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-IPV6-PROFILE-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-IPV6-PROFILE-MIB::juniIpv6ProfileTable'
The entries in this table describe profiles for configuring IP
interfaces.
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.
juniIpv6ProfileEntry row .1.3.6.1.4.1.4874.2.2.68.1.1.1.1
A profile describing configuration of an IPv6 interface.
Column Syntax OID
The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.1
A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.

The INDEX object(s) and this object are excl…
Juniper-TCJuniSetMapr/w
Type Constraints:
range: 0..8
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2
The virtual router to which an IPv6 interface configured by this
profile will be assigned, if other mechanisms do not otherwise specify a
virtual router assignment.
Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.3
An IPv6 address to be used by an IPv6 interface configured by this
profile. This object will have a value of 0::0 for an unnumbered
interface.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.4
An IPv6 address mask length to be used by an IPv6 interface configured
by this profile. This object will have a value of 0 for an unnumbered
interface.
Integer32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.5
The configured MTU size for this IPv6 network interface. If set to
zero, the default MTU size, as determined by the underlying network
media, is used.
Integer32r/w
Constraints:
range: 0-0
range: 1280-10240
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.6
Enable/disable whether source addresses in received IPv6 packets are
validated. Validation is performed by looking up the source IPv6
address in the routing database and determining whether the packet
arrived on the ex…
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.7
The text identifier of the numbered interface, associated with the
specified virtual router, whose IPv6 address is used as the source
address when transmitting IPv6 packets on unnumbered remote access user
links. Types…
OctetStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.8
Enable/disable ND for this IPv6 network interface.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.9
Enable/disable ND managed config for this IPv6 network interface.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.10
Enable/disable ND other config for this IPv6 network interface.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.11
Enable/disable ND suppress RA for this IPv6 network interface.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.12
The configured interval between IPv6 RA transmissions on the interface.
Integer32r/w
Constraints:
range: 3-1800
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.13
The configured RA lifetime for this IPv6 network interface.
Integer32r/w
Constraints:
range: 0-1800
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.14
The configured RA reachable time for this IPv6 network interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.15
The prefix associated with the this interface.
IPV6-TCIpv6AddressPrefixr/w
Type Constraints:
range: 0..16
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.16
The length of the prefix (in bits).
Integer32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.17
This object has the value 'true(1)', if this
prefix can be used for on-link determination
and the value 'false(2)' otherwise.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.18
Autonomous address configuration flag. When
true(1), indicates that this prefix can be used
for autonomous address configuration (i.e. can
be used to form a local interface address).
If false(2), it is not used to autoc…
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.19
It is the length of time in seconds that this
prefix will remain preferred, i.e. time until
deprecation. A value of 4,294,967,295 represents
infinity.

The address generated from a deprecated prefix
shoul…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.20
It is the length of time in seconds that this
prefix will remain valid, i.e. time until
invalidation. A value of 4,294,967,295 represents
infinity.

The address generated from an invalidated prefix
should…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.21