Juniper-IP-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
10

juniIpTunnelInterfaceTable

table
.1.3.6.1.4.1.4874.2.2.51.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniIpTunnelInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-IP-TUNNEL-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-IP-TUNNEL-MIB::juniIpTunnelInterfaceTable' 
This table contains entries of IP Tunnel interfaces.
juniIpTunnelInterfaceEntry row .1.3.6.1.4.1.4874.2.2.51.1.2.1
Each entry describes the characteristics of a single IP Tunnel
interface.

Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/juniIfTable.
Indexes
Column Syntax OID
juniIpTunnelIfIndex
The ifIndex of the IP tunnel interface. When creating entries in this
table, suitable values for this object are determined by reading
juniIpTunnelNextIfIndex.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.1
juniIpTunnelName
The administratively assigned name for this IP Tunnel interface.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.2
juniIpTunnelMode
The configured mode for this IP Tunnel interface.
Enumerationr/w
Enumerated Values:
0ipTunnelModeGre
1ipTunnelModeDvmrp
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.3
juniIpTunnelVirtualRouter
The transport virtual router associated with this IP tunnel interface.
This object need not be set when creating row entries. Note that the
default when this object is not specified is the router associated with
the ag…
Juniper-TCJuniNamer/w
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.4
juniIpTunnelChecksum
The Tunnel checksum configuration for this entry. Setting this object
to true(1) will enabled end-to-end checksumming and will cause the
system to drop packets with bad checksums received on this interface.
Setting thi…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.5
juniIpTunnelMtu
The tunnel MTU.
Integer32r/w
Constraints:
range: 1024-10240
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.6
juniIpTunnelDestination
The tunnel destination IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.7
juniIpTunnelSource
The tunnel source IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.8
juniIpTunnelRowStatus
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy

To create an entry in this …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.9
juniIpTunnelSequenceNumbers
The tunnel sequence number configuration for this entry. Setting this
object to true(1) will enable sequence number generation. Setting this
object to false(2) will disable this feature.
Note: This configuration obje…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4874.2.2.51.1.2.1.10